Fiber Optic Cable Clamp Manufacturer — Tension, Suspension, Altzairu herdoilgaitza, Aluminum Alloy & Figure-8 Clamps

FIBCONET manufactures fiber optic cable clamps and hardware for aerial FTTH, ADSS long-span, figure-8 self-supporting and drop-cable installations. Combined output on our mainstream plastic clamp lines reaches one million pieces per month, with dedicated stamping and injection tooling supporting fast MOQ from 100 piezak.

Every clamp is tested to IEC 60794-1-2 tensile methodology before shipment, with per-batch tensile strength, appearance and toughness verification. Steel components are available in 201 edo 304 altzairu herdoilgaitza, hot-dip galvanized carbon steel, or die-cast aluminum alloy — matched to your climate, span length and service-life target.

Below are the six clamp families currently shipping to telecom operators, FTTH engineering contractors, energia-zerbitzuak eta banda zabaleko udal-proiektuak Asiako hego-ekialdean, Ekialde Hurbila, Latinoamerika, Europa eta Afrika.

6 Zuntz optikoko kablearen besarkada seriea fabrikatzen dugu

Seriea	Funtzioa	Tentsioaren balorazioa	Aplikazio tipikoa
Tentsio plastikoa / Aingura Besarkada (PA6 / PA66)	Terminal ainguraketa, tentsio-karga axiala	600 N – 8 kN	FTTH aireko jaitsiera, tarte laburreko ADSS, horma / polo terminalaren finkapena
Aluminiozko aleazioko tentsioa (Heavy-Duty) ⭐	Luzeko tentsio axiala kanpoko baldintza gogorretan	Gora 10 kN baloratu	Kostaldeko gatz-laino eremuak, campus osoa optikoa, zaintza bizkarrezurra, aireko enbor industriala
Esekidura Pintza (J-mota, Kautxua + Altzairu Galbanizatua)	Karga bertikala bakarrik — kablearen pisua onartzen du zutoin zuzenetan	Baloratua 1.5 kN bertikala, hautsi 3.8 kN	Luzeko ADSS lerro zuzeneko esekidura, erdiko poloaren finkapena aireko enborrean
Altzairu herdoilgaitzezko alanbrea (201 / 304)	Erederako kablearen eta ADSS argaletarako terminal ainguraketa	600 N – 3 kN (lodiera menpekoa)	FTTH jaitsiera, kanpoko terminala, kostaldekoa / itsas hedapenak (304)
8. Irudia Kable-Brasotza	8 irudiko kablea eusten dio bere mezulari integralean	Honekin parekatua 2.5 mm-ko mezulari galbanizatua	8. irudia (GYXTC8S) aireko hedapenak
Hardware Osagarriak	Zutoin euskarria, muntatzeko uztaia, torloju-orrinduzko euskarria, altzairu herdoilgaitzezko banda & bucklea	2.5 kN - 6 kN (torlojuaren euskarria); 4 kN (muntatzeko uztaia)	Zutoinaren finkapena, horman muntatzea, kableen bideratzea, banda-uhala ixtea

Barruko kalitatezko plastikozko euskarri arruntak dira zorrozki ez da gomendagarria epe luzerako kanpoko aire-instalazioetarako - ez dituzte telekomunikazioen iraunkortasun-zehaztapenak betetzen. Kanpoko edozein hedapenerako, aukeratu kanpoan baloratutako plastikozko serie bat (UV-gehigarria PA6/PA66), aluminiozko aleazioa, edo goiko tauletako altzairu herdoilgaitza.

Tentsio Besarkada vs Esekidura Besoa - Zein da aldea?

Hau da erosleen nahasmen iturri ohikoena, beraz, merezi du zehatza izatea:

	Tentsioa / Aingura Besarkada	Esekidura Pintza
Zer egiten duen	Kablearen tentsio axial osoa mantentzen du; tira-indarra konpentsatzen du linearen amaieran	Kablearen pisu bertikala bakarrik onartzen du — ez du tentsio axiala eramaten
Nora doa	Lineako terminalak, zutoin izkinak, hil-muturrak, ekipamenduak sartzeko puntuak	Terminalen arteko zutoin zuzenak, erdialdeko finkapena
Kargatu profila	Tiraketa indar horizontala + tentsio axial guztiak	Karga bertikala (kablearen pisu propioa) bakarrik
Tentsio-maila tipikoa	600 N – 10 kN materialaren arabera	1.5 kN puntuazio bertikala / 3.8 kN hausteko indarra
Oinarrizko araua	Lerro amaiera eta norabide aldaketa bakoitzak bat behar du	Erabili terminalen artean kablea urrutitik saihesteko

Nola aukeratu zure proiekturako besarkada egokia

Lau galderak aukeraketa zuzena bideratzen dute: funtzioa, kable mota, ingurunea, eta trakzio-karga.

1. Lotu besarkada zure kable motarekin

Kable mota	Gomendatutako Pintza Seriea
FTTH jaitsierako kablea (tximeleta / arku mota)	Plastikozko PA6/PA66 tentsioa, edo altzairu herdoilgaitzezko alanbre-alanbrea kostaldeko erabilerarako
ADSS jaka bakarra, arte zabaltzen da 200 m	Plastikozko PA6 aingura-pintza SS201 alanbrearekin (tarte laburra); aluminiozko aleazioa 10 kN (tarte luzea)
ADSS jaka bikoitza, arte zabaltzen da 300 m	Aluminiozko aleazioko tentsioa; terminalen arteko esekidura-pintzak
8. irudia kable autosostengatzailea (GYXTC8S)	8. irudia kablearen euskarriarekin bat dator 2.5 mm-ko mezulari galbanizatua
Kable biribila, 2–8 mm-ko diametroa	Altzairu herdoilgaitzezko kable biribila
Laua / larruzko kablea, 2×3 mm edo 2×5 mm	PA66 nylonezko kable laua, arte 1,062 N trakzioa

2. Lotu materiala zure ingurunearekin

Ingurumena	Gomendatutako materiala	Esperotako Zerbitzu-bizitza
Kanpoko orokorra, barnealdean, klima moderatua	Kanpoko maila PA6 / PA66 UV gehigarriarekin	20+ urteak
Kostaldeko gatz-lainoa, itsas esposizio arina	Aluminio aleazioa (kromoaren pasivazio tribalentea) edo 304 altzairu herdoilgaitza	10–15 urte (aluminioa); 15+ urteak (SS)
Kostaldeko gatz astuna, itsasoz kanpo	304 altzairu herdoilgaitza, beroan galvanizatutako esekidura-gorputza	15+ urteak
Kimikoa / giro industriala	316 altzairu herdoilgaitzezko banda & bucklea	Aplikazioaren araberakoa
Barruko igoerak, behin-behineko kableatzea	Plastikozko euskarri estandarra onargarria da	Aplikazioaren araberakoa

3. Lotu trakzio balorazioa span eta haize eremuarekin

• 600 N – 1.5 kN: FTTH jaitsiera kable terminalak, egoitza-ibilbide laburrak, babestutako instalazioak
• 2.5 kN - 3 kN: ADSS terminal estandarrak, 3–9 mm-ko kablearen diametroa, haize moderatuko zonak
• 4 kN - 6 kN: Erdialdeko ADSS, haize-karga handiagoa, kable astunagoa OD
• 8 kN - 10 kN: Luzeko ADSS, kostaldekoa / haize handiko zonak, guztiz optikoko campuseko enborra (aluminiozko aleazio gomendagarria)

4. Berretsi kablearen diametroaren bateragarritasuna

Pintza bakoitzak kable-diametro tarte zehatz bat du. Guk fabrikatzen ditugun gama arruntak: 3–9 mm (tentsio plastikoa); 3–10 mm (aluminiozko aleazioa); 5–20 mm A/B/C/D neurrietan (esekidura); 2–8 mm (altzairu biribila). Berretsi beti zure xede-kablearen OD zehatza eskaera egin aurretik.

Clamp serie guztietan zehaztapen teknikoak

Parametroa	Balioa
Proba estandarra	IEC 60794-1-2 trakzio metodologia (5 mm/min karga-tasa giro-tenperaturan)
Gorputzeko materialak	PA6 / PA66 ingeniaritza birjinaren plastikoa (V0 suaren aurkakoa eskatuta); fundiziozko aluminiozko aleazioa; 201 / 304 altzairu herdoilgaitza; hot-dip galvanized carbon steel
Altzairuzko alanbre materiala	SS201 (Indize optiko eta mekaniko guztiek adabaki kablea betetzen dute); SS304 (kostaldekoa / high corrosion)
Steel wire length	Gora 50 cm per side custom (aluminum alloy series)
Funtzionamendu-tenperatura	-40 arte +80 °C (plastic and aluminum series); −15 to +60 °C (standard PA6 tension)
Salt-spray resistance	96 hours neutral salt-spray test with no visible corrosion (304 stainless); exceeds market standard 72 h
UV erresistentzia	UV-additive plastic tested for 20-year outdoor service life without cracking
Flame retardancy	V0 grade available on request for plastic series
Diseinatzea zerbitzu-bizitza	Plastikoa 20 urteak; aluminiozko aleazioa 25 urteak; esekidura-pintza 25 urteak
Instalazioa	Hand installation, no special tools required for most series; installation videos provided per SKU

Fabrikazio Gaitasuna eta Kalitate Kontrola

Hileko irteera

• Plastic drop-wire clamp: 1,000,000 pieces per month standard capacity; expandable via additional mold slots to match project volume
• Aluminiozko aleazioko tentsioa: dedicated die-casting line with in-house passivation
• Stainless steel clamp: precision stamping + rolling forming, thickness range 0.5–1.2 mm

Raw Material Discipline

• Plastic bodies use 100% virgin engineering pellets — no recycled or regrind material. Toughness and temperature stability stay consistent batch to batch.
• Steel wire is genuine SS201 or SS304, not repurposed carbon steel with surface plating — corrosion protection lasts the product’s design life, not just its warranty period.
• Aluminum alloy shells use a high-strength die-cast grade, protected by an eco-friendly kromoaren pasivazio tribalentea conversion coating that blocks rain and UV attack.

100% Bidalketa aurreko probak

• Every batch: trakzio-erresistentzia, toughness, itxura
• Steel components: 96 h neutral salt-spray verification for 304 SS
• Test loading follows IEC 60794-1-2 methodology at 5 mm/min
• First-piece confirmation on every batch to eliminate batch-to-batch drift
• Third-party RoHS and tensile test reports available on request

Ziurtagiriak eta betetzea

• RoHS compliance certificates renewed annually
• ISO 9001 Kalitatea Kudeatzeko Sistema, fabrika osoan
• IEC 60794-1-2 tensile test methodology followed for all clamp series
• Third-party tensile, gatz-spray, UV aging and flame-retardant reports available on request

Ziurtagiriaren aplikagarritasuna produktu-lerroaren eta helmuga-merkatuaren arabera aldatzen da. Please confirm the target country, deployment environment and required standards when requesting a quotation.

OEMa, Enbalajea & Aukera pertsonalizatuak

• Logotipo pertsonalizatua: laser marking on plastic and metal parts; mold-printed logo for high-volume orders
• Kolore pertsonalizatua: shell colour customization on plastic clamps, mold development free of charge for qualifying volumes
• Custom mold: full new-mold development supported for exclusive styles
• Ontziak pertsonalizatuak: private-label outer cartons, product logo printing, erosleen markako eranskailuak; standard packing is individual PE bag with 80–100 pieces per carton depending on SKU
• Sample policy: free single-piece sample on most SKUs; arte 5 free samples on stainless steel round-cable clamp

Frequently Asked Questions About Fiber Optic Cable Clamp Sourcing

Q1. What is your minimum order quantity?

MOQ varies by series: 100 piezak for plastic and stainless steel drop-wire clamps; 500 piezak for suspension clamp, wedge-type tension, hardware brackets and hoops; 1 pieza for stainless steel band & buckle sample. Custom mold development is available free of charge for qualifying volumes.

Q2. What is the standard lead time?

Suspension clamp: 10 egunak. Plastic drop-wire clamp and stainless steel clamp: typically 10–15 days depending on quantity. Aluminum alloy and custom-colour or custom-mold builds: quoted per project. Regular configurations of common SKUs are held in stock and can ship within days.

Q3. Can you customize logo, colour, and packaging?

Bai. We support laser logo marking on plastic and metal parts, mold-printed logo for high-volume orders, shell colour customization on plastic clamps, and full private-label packaging (kanpoko kartoiaren logotipoa, erosleen markako eranskailuak, product-logo printing). Custom mold development is supported and often provided free of charge for qualifying order volumes.

Q4. What is the difference between a tension clamp and a suspension clamp?

A tentsioa (anchor) besarkada holds the full axial tension of the cable at line terminals, pole corners and lead-in points — it bears the horizontal pulling force. A esekidura-pintza only supports the vertical weight of the cable on straight-line poles between terminals — it does not carry axial tension. Every line-end needs tension clamps; suspension clamps go in between to prevent cable sag.

Q5. Which material should I choose for coastal installations?

For heavy salt-spray environments, erabili 304 altzairu herdoilgaitza for all steel components — our 304 grade passes a 96 h neutral salt-spray test with no visible corrosion (exceeding the industry-standard 72 h). Aluminio aleazioa with trivalent chromium passivation is a strong alternative for the clamp body, delivering 10–15 years of stable service in mild coastal salt fog. Avoid 201 stainless steel and galvanized carbon steel for prolonged coastal use — long-term maintenance cost will exceed the initial price difference.

6.G. What tensile strength do you offer?

Ratings by series: 600 N (Indize optiko eta mekaniko guztiek adabaki kablea betetzen dute 0.5 mm stainless steel drop-wire clamp) arte 1,500 N for thicker variants; 1.5 kN - 3 kN for standard plastic tension clamps; 2.5 kN - 6 kN for bolt-crimp bracket family; 4 kN for suspension clamp break strength (baloratu 1.5 kN bertikala); arte 8 kN for PA1500 heavy plastic anchor; arte 10 kN for die-cast aluminum alloy tension clamp; arte 15 kN for hardware series (metal bracket & bucklea).

7.G. Do the clamps damage the fiber optic cable?

Ez. Our tension clamps use a wedge self-locking + soft-contact protective design that distributes tension evenly over the contact section rather than concentrating pressure on a single point. Suspension clamps use a TPR soft rubber liner + galvanized steel shell composite structure that grips the cable without crushing the jacket or introducing microbend loss to the internal fiber.

8.G. Are special tools required for installation?

Most of our clamp series install by hand without special tools — the wedge self-locking design engages when tension is applied. We provide dedicated installation videos for each series. For safety we recommend wearing gloves when handling stainless steel edges. Bolt-crimp brackets use standard M4/M5/M6 hex bolts compatible with common wrenches.

9.G. What is the service life for outdoor installations?

Diseinatzea zerbitzu-bizitza: 20 urteak for UV-additive plastic clamps; 25 urteak for aluminum alloy and suspension clamps; 15 urteak in coastal salt-spray areas for hot-dip galvanized suspension clamps; 10 years+ for stainless steel drop-wire clamps in general outdoor use. Standard indoor plastic clamps are not suitable for long-term outdoor aerial installations.

Q10. Can you provide samples for evaluation?

Bai. Free single-piece samples are available on most SKUs including PA6 tension clamps. Free samples up to 5 piezak on the stainless steel round-cable clamp. Buyers cover sample shipping cost, which is credited back on the first bulk order. Custom-colour or custom-mold samples are quoted per project.