Tagagawa ng Fiber Optic Cable Clamp — Tensyon, Pagsuspinde, Hindi kinakalawang na asero, Aluminum Alloy & Figure-8 Clamps

Gumagawa ang FIBCONET ng fiber optic cable mga clamp at hardware para sa aerial FTTH, Mahabang tagal ng ADSS, figure-8 self-supporting at drop-cable installation. Ang pinagsamang output sa aming mga pangunahing linya ng plastic clamp ay umaabot isang milyong piraso bawat buwan, na may dedikadong stamping at injection tooling na sumusuporta sa mabilis na MOQ mula sa 100 mga piraso.

Ang bawat clamp ay sinubukan IEC 60794-1-2 makunat na pamamaraan bago ipadala, na may per-batch tensile strength, pag-verify ng hitsura at katigasan. Ang mga bahagi ng bakal ay magagamit sa 201 o 304 hindi kinakalawang na asero, hot-dip galvanized carbon steel, o die-cast na aluminyo haluang metal — tugma sa iyong klima, haba ng span at target ng buhay ng serbisyo.

Nasa ibaba ang anim na pamilya ng clamp na kasalukuyang nagpapadala sa mga operator ng telecom, Mga kontratista ng FTTH engineering, mga power utilities at mga proyekto ng munisipal na broadband sa buong Southeast Asia, ang Gitnang Silangan, Latin America, Europa at Africa.

6 Fiber Optic Cable Clamp Series na Ginagawa Namin

Serye	Function	Rating ng makunat	Karaniwang Aplikasyon
Plastic Tension / Anchor Clamp (PA6 / PA66)	Terminal anchoring, axial tension load	600 N – 8 kN	FTTH aerial drop, maikling-span ADSS, pader / pag-aayos ng terminal ng poste
Aluminum Alloy Tension Clamp (Mabigat na Tungkulin) ⭐	Long-span axial tension sa malupit na mga kondisyon sa labas	Hanggang sa 10 kN na-rate	Mga lugar na may asin-fog sa baybayin, all-optical campus, gulugod ng pagmamatyag, pang-industriyang aerial trunk
Suspension Clamp (J-Uri, goma + Galvanized Steel)	Vertical load lang — sumusuporta sa bigat ng cable sa mga straight-line pole	Na-rate 1.5 kN patayo, break 3.8 kN	Long-span ADSS straight-line suspension, mid-pole fixation sa aerial trunk
Hindi kinakalawang na Steel Drop Wire Clamp (201 / 304)	Terminal anchoring para sa drop cable at slim ADSS	600 N – 3 kN (depende sa kapal)	FTTH drop, panlabas na terminal, baybayin / mga deployment ng dagat (304)
Figure-8 Cable Clamp	Hinahawakan ang figure-8 na self-supporting cable sa integral messenger nito	Itinugma sa 2.5 mm galvanized messenger	Larawan-8 (GYXTC8S) aerial deployment
Mga Accessory ng Hardware	Pole bracket, mounting hoop, bolt-crimp bracket, hindi kinakalawang na asero band & buckle	2.5 kN – 6 kN (bracket ng bolt); 4 kN (mounting hoop)	Pag-aayos ng poste, Pag-mount sa dingding, pagruruta ng cable, pangkabit ng band-strap

Ang mga karaniwang pang-ipit na pang-ipit sa loob ng grado ay mahigpit na hindi inirerekomenda para sa mga pangmatagalang panlabas na pag-install ng himpapawid — hindi nila natutugunan ang mga detalye ng tibay ng telecom. Para sa anumang panlabas na deployment, pumili ng isang panlabas-rated plastic series (UV-additive na PA6/PA66), aluminyo haluang metal, o hindi kinakalawang na asero mula sa mga talahanayan sa itaas.

Tension Clamp vs Suspension Clamp — Ano ang Pagkakaiba?

Ito ang pinakakaraniwang pinagmumulan ng pagkalito ng mamimili, so it’s worth being precise:

	Tension / Anchor Clamp	Suspension Clamp
What it does	Holds the full axial tension of the cable — offsets pulling force at the line terminus	Supports the vertical weight of the cable only — does not carry axial tension
Where it goes	Line terminals, pole corners, dead-ends, equipment lead-in points	Straight-line poles between terminals, mid-span fixation
Load profile	Horizontal pulling force + all axial tension	Vertical load (cable self-weight) lamang
Typical tensile rating	600 N – 10 kN depending on material	1.5 kN vertical rated / 3.8 kN break strength
Rule of thumb	Every line-end and every direction change needs one	Use between terminals to prevent cable sag over distance

How to Choose the Right Clamp for Your Project

Four questions drive the right selection: function, uri ng cable, kapaligiran, at tensile load.

1. Match the Clamp to Your Cable Type

Uri ng Cable	Recommended Clamp Series
FTTH drop cable (butterfly / bow-type)	Plastic PA6/PA66 tension clamp, or stainless steel drop wire clamp for coastal use
ADSS single-jacket, sumasaklaw hanggang sa 200 m	Plastic PA6 anchor clamp with SS201 wire (short span); aluminyo haluang metal 10 kN (long span)
ADSS double-jacket, sumasaklaw hanggang sa 300 m	Aluminum alloy tension clamp; suspension clamps between terminals
Figure-8 self-supporting cable (GYXTC8S)	Figure-8 cable clamp matched to 2.5 mm galvanized messenger
Round cable, 2–8 mm diameter	Stainless steel round-cable clamp
Flat / katad na cable, 2×3 mm or 2×5 mm	PA66 nylon flat cable clamp, hanggang sa 1,062 N makunat

2. Match the Material to Your Environment

Kapaligiran	Inirerekumendang Materyal	Expected Service Life
General outdoor, inland, moderate climate	Outdoor-grade PA6 / PA66 with UV additive	20+ mga taon
Coastal salt-fog, mild marine exposure	Aluminum alloy (trivalent chromium passivation) o 304 hindi kinakalawang na asero	10–15 years (aluminyo); 15+ mga taon (SS)
Heavy coastal salt spray, malayo sa pampang	304 hindi kinakalawang na asero, hot-dip galvanized suspension body	15+ mga taon
Chemical / industrial atmosphere	316 hindi kinakalawang na asero band & buckle	Application dependent
Indoor risers, temporary wiring	Standard plastic clamp acceptable	Application dependent

3. Match Tensile Rating to Span and Wind Zone

• 600 N – 1.5 kN: FTTH drop cable terminals, short residential runs, sheltered installations
• 2.5 kN – 3 kN: Standard ADSS terminals, 3–9 mm cable diameter, moderate wind zones
• 4 kN – 6 kN: Mid-span ADSS, higher wind loading, heavier cable OD
• 8 kN – 10 kN: Long-span ADSS, baybayin / high-wind zones, all-optical campus trunk (aluminum alloy recommended)

4. Confirm Cable Diameter Compatibility

Every clamp has a specified cable-diameter range. Common ranges we manufacture: 3–9 mm (plastic tension); 3–10 mm (aluminyo haluang metal); 5–20 mm across A/B/C/D sizes (suspension); 2–8 mm (round steel). Always confirm the exact OD of your target cable before ordering.

Technical Specifications Across All Clamp Series

Parameter	Halaga
Pamantayan sa pagsubok	IEC 60794-1-2 tensile methodology (5 mm/min loading rate at room temperature)
Body materials	PA6 / PA66 virgin engineering plastic (V0 flame-retardant on request); die-cast aluminum alloy; 201 / 304 hindi kinakalawang na asero; hot-dip galvanized carbon steel
Steel wire material	SS201 (pamantayan); SS304 (baybayin / high corrosion)
Steel wire length	Hanggang sa 50 cm per side custom (aluminum alloy series)
Temperatura ng pagpapatakbo	−40 hanggang +80 °C (plastic and aluminum series); −15 to +60 °C (standard PA6 tension)
Salt-spray resistance	96 hours neutral salt-spray test with no visible corrosion (304 stainless); exceeds market standard 72 h
Paglaban ng UV	UV-additive plastic tested for 20-year outdoor service life without cracking
Flame retardancy	V0 grade available on request for plastic series
Buhay ng serbisyo sa disenyo	plastic 20 mga taon; aluminyo haluang metal 25 mga taon; suspensyon clamp 25 mga taon
Instalasyon	Hand installation, no special tools required for most series; installation videos provided per SKU

Kakayahan sa Paggawa at Kontrol sa Kalidad

Monthly Output

• Plastic drop-wire clamp: 1,000,000 pieces per month standard capacity; expandable via additional mold slots to match project volume
• Aluminum alloy tension clamp: dedicated die-casting line with in-house passivation
• Stainless steel clamp: precision stamping + rolling forming, thickness range 0.5–1.2 mm

Raw Material Discipline

• Plastic bodies use 100% virgin engineering pellets — no recycled or regrind material. Ang tigas at katatagan ng temperatura ay nananatiling pare-pareho ang batch sa batch.
• Ang bakal na wire ay tunay na SS201 o SS304, hindi repurposed carbon steel na may surface plating — ang proteksyon sa corrosion ay tumatagal sa buhay ng disenyo ng produkto, hindi lang warranty period nito.
• Ang mga shell ng aluminyo na haluang metal ay gumagamit ng mataas na lakas na die-cast na grado, protektado ng isang eco-friendly trivalent chromium passivation conversion coating na humaharang sa ulan at UV attack.

100% Pre-Shipment Testing

• Bawat batch: lakas ng paghatak, katigasan, hitsura
• Mga bahagi ng bakal: 96 h neutral salt-spray verification para sa 304 SS
• Ang pag-load ng pagsubok ay sumusunod sa IEC 60794-1-2 pamamaraan sa 5 mm/min
• Unang piraso ng kumpirmasyon sa bawat batch upang maalis ang batch-to-batch drift
• Available ang mga ulat ng third-party na RoHS at tensile test kapag hiniling

Mga Sertipikasyon at Pagsunod

• Rohs mga sertipiko ng pagsunod na nire-renew taun-taon
• ISO 9001 Sistema ng Pamamahala ng Kalidad, buong pabrika
• IEC 60794-1-2 sinusunod ang pamamaraan ng tensile test para sa lahat ng serye ng clamp
• Third-party na makunat, pag-spray ng asin, Available ang mga ulat sa UV aging at flame-retardant kapag hiniling

Ang pagiging angkop ng sertipikasyon ay nag-iiba ayon sa linya ng produkto at patutunguhang merkado. Pakikumpirma ang target na bansa, deployment environment at mga kinakailangang pamantayan kapag humihiling ng quotation.

OEM, Packaging & Custom Options

• Custom logo: laser marking on plastic and metal parts; mold-printed logo for high-volume orders
• Custom colour: shell colour customization on plastic clamps, mold development free of charge for qualifying volumes
• Custom mold: full new-mold development supported for exclusive styles
• Custom packaging: private-label outer cartons, product logo printing, buyer-branded stickers; standard packing is individual PE bag with 80–100 pieces per carton depending on SKU
• Sample policy: free single-piece sample on most SKUs; hanggang sa 5 free samples on stainless steel round-cable clamp

Frequently Asked Questions About Fiber Optic Cable Clamp Sourcing

Q1. Ano ang iyong minimum na dami ng order?

MOQ varies by series: 100 mga piraso for plastic and stainless steel drop-wire clamps; 500 mga piraso for suspension clamp, wedge-type tension, hardware brackets and hoops; 1 piraso for stainless steel band & buckle sample. Custom mold development is available free of charge for qualifying volumes.

Q2. Ano ang karaniwang lead time?

Suspension clamp: 10 mga araw. Plastic drop-wire clamp and stainless steel clamp: typically 10–15 days depending on quantity. Aluminum alloy and custom-colour or custom-mold builds: quoted per project. Regular configurations of common SKUs are held in stock and can ship within days.

Q3. Can you customize logo, colour, and packaging?

Oo nga. We support laser logo marking on plastic and metal parts, mold-printed logo for high-volume orders, shell colour customization on plastic clamps, and full private-label packaging (panlabas na logo ng karton, buyer-branded stickers, product-logo printing). Custom mold development is supported and often provided free of charge for qualifying order volumes.

Q4. What is the difference between a tension clamp and a suspension clamp?

A tension (anchor) clamp holds the full axial tension of the cable at line terminals, pole corners and lead-in points — it bears the horizontal pulling force. A suspensyon clamp only supports the vertical weight of the cable on straight-line poles between terminals — it does not carry axial tension. Every line-end needs tension clamps; suspension clamps go in between to prevent cable sag.

Q5. Which material should I choose for coastal installations?

For heavy salt-spray environments, gamitin ang 304 hindi kinakalawang na asero for all steel components — our 304 grade passes a 96 h neutral salt-spray test with no visible corrosion (exceeding the industry-standard 72 h). Aluminum alloy with trivalent chromium passivation is a strong alternative for the clamp body, delivering 10–15 years of stable service in mild coastal salt fog. Avoid 201 stainless steel and galvanized carbon steel for prolonged coastal use — long-term maintenance cost will exceed the initial price difference.

Q6. What tensile strength do you offer?

Ratings by series: 600 N (pamantayan 0.5 mm stainless steel drop-wire clamp) hanggang sa 1,500 N for thicker variants; 1.5 kN – 3 kN for standard plastic tension clamps; 2.5 kN – 6 kN for bolt-crimp bracket family; 4 kN for suspension clamp break strength (na-rate 1.5 kN patayo); hanggang sa 8 kN for PA1500 heavy plastic anchor; hanggang sa 10 kN for die-cast aluminum alloy tension clamp; hanggang sa 15 kN for hardware series (metal bracket & buckle).

Q7. Do the clamps damage the fiber optic cable?

Hindi. Our tension clamps use a wedge self-locking + soft-contact protective design that distributes tension evenly over the contact section rather than concentrating pressure on a single point. Suspension clamps use a TPR soft rubber liner + galvanized steel shell composite structure that grips the cable without crushing the jacket or introducing microbend loss to the internal fiber.

Q8. Are special tools required for installation?

Most of our clamp series install by hand without special tools — ang wedge na self-locking na disenyo ay kumikilos kapag ang tensyon ay inilapat. Nagbibigay kami ng nakalaang mga video sa pag-install para sa bawat serye. Para sa kaligtasan, inirerekumenda namin ang pagsusuot ng guwantes kapag humahawak sa mga gilid na hindi kinakalawang na asero. Gumagamit ang mga bolt-crimp bracket ng karaniwang M4/M5/M6 hex bolts na tugma sa mga karaniwang wrenches.

Q9. Ano ang buhay ng serbisyo para sa mga panlabas na pag-install?

Buhay ng serbisyo sa disenyo: 20 mga taon para sa UV-additive na plastic clamp; 25 mga taon para sa aluminum alloy at suspension clamps; 15 mga taon sa coastal salt-spray areas para sa hot-dip galvanized suspension clamps; 10 taon+ para sa hindi kinakalawang na asero drop-wire clamp sa pangkalahatang panlabas na paggamit. Ang mga karaniwang panloob na plastic clamp ay hindi angkop para sa pangmatagalang panlabas na pag-install ng aerial.

Q10. Maaari ka bang magbigay ng mga sample para sa pagsusuri?

Oo nga. Libreng single-piece sample ay magagamit sa karamihan ng mga SKU kabilang ang PA6 tension clamps. Libreng sample hanggang sa 5 mga piraso sa hindi kinakalawang na asero round-cable clamp. Sinasaklaw ng mga mamimili ang sample na gastos sa pagpapadala, na na-credit pabalik sa unang bulk order. Ang mga custom na kulay o custom-mold na mga sample ay sinipi bawat proyekto.