iSoqoni ni MPO

MPO / MTP Data Center Cabling Manufacturer — Cassettes, Patch Panels, Trunk Cables and Patch Cords
Fibconet fabrica 10 series of MPO / MTP fiber optic products for 40G, 100G, 400G and 800G data center cabling. The product line covers cassette modules, 1U rack patch panels, MPO trunk and patch cords, MPO-to-LC breakouts, loopbacks and MPO/MTP cleaners — enough to build a full high-density link from the MDA to the switch port without adding a second supplier.

Production runs on dedicated MPO polishing, ribbon splicing and 3D interferometer inspection lines. Monthly output reaches 150,000 veitikina across the MPO family. Fiber count scales up to 72 fibers per MPO end for 400G/800G backbone applications. Single-fiber insertion loss can be controlled to 0.15 dB on assemblies built with Japanese-imported ferrules, and to typical 0.20–0.35 dB on standard builds with domestic Sanhuan ferrules.

Every finished cable is 100% inspected for insertion loss, lesu tale, end-face geometry, veivakaduiduitaki, veitarataravi ni fiber, balavu kei na kena irairai .. FLUKE / EXFO electronic test reports are available after order confirmation. Products currently ship into hyperscale, telecom and enterprise data-center projects in the US, Canada, Germany, UK and Netherlands.
10 MPO / MTP Products We Manufacture
Ilawalawa 1 — Cassette Modules
Pre-terminated MPO-to-LC or MPO-to-MPO conversion cassettes for 1U rack panels. The building block of any high-density data-center row.

iVakaraitaki
Wili ni Lewe ni Taucoko ni Matavuvale
Dua na baleti iko
Vakayagataki Vakatautauvata

Fiber Optic MPO 1U 12–144 Cores Cassette Module
12 ki na 144
MPO trunk in / LC duplex out
Standard MDA-to-EDA conversion

12/24 Na Colan Church-Diloloma Veisemati ni Leluvailevu (Counsette).
12 se 24
MPO in / LC out
Compact rack builds with 12F or 24F MPO base

8/12/24 E TOTOKA me […] 24 LCra History de 1 Uto .
Me yacova na 24 LC per 1U
MPO/MTP in / 24 LC out
Highest 1U density; AI cluster and hyperscale rows

Ilawalawa 2 — Rack Patch Panels
Empty or pre-assembled 1U 19-inch chassis to hold cassette modules and to organise trunk cables at the top of the rack.

iVakaraitaki
Rack Size
Loading
Vakayagataki Vakatautauvata

Data Center 19-inch Standard Rack MPO Patch Panel
1U
Empty chassis for cassettes
Standard MDA rack, modular build

Pre-assembled 1U 19-inch Rack LC MTP®/MPO Patch Panel
1U
Pre-terminated LC front, MPO back
Plug-and-play rack, no field assembly

Ilawalawa 3 — Patch Cords and Trunk Cables

The physical link between MPO cassettes, oti, transceivers and MPO backbone runs.

iVakaraitaki
iTuvatuva
Fiber Options
Vakayagataki Vakatautauvata

Factory Pre-termination MPO-MPO 3.0mm LSZH Patch Cord / Trunk Cable
MPO to MPO
laiva / OM3 / OM4 / NI5
Backbone trunk, MDA to EDA

Fubert Eptictic Puef MImbrei pero pierdas Patch Cond
MPO to MPO
laiva / OM3 / OM4 / NI5
Rack-to-rack short jumper

FTTA MPO/MTP Fiber Optic Patch Cord Cable
MPO to MPO, outdoor jacket
laiva / OM3 / OM4
Base station FTTA and outdoor short link

Ilawalawa 4 — Loopback
Used to test transceiver ports, cassette continuity and rack integrity without pulling a full trunk link.

iVakaraitaki
Dua na baleti iko
Taucoko ni Taucoko
Vakayagataki Vakatautauvata

OM3 MM MTP/APC Female MPO Loopback
MTP/APC female
OM3 multimode
Multimode transceiver and cassette test

Ilawalawa 5 — Cleaning Tools
End-face contamination is the single largest cause of MPO insertion-loss failures. One qualified cleaner per rack is standard project practice.

iVakaraitaki
Fits
Vakayagataki Vakatautauvata

Na iVukevuke kece ni MPO/MTPleanin
All MPO/MTP end-faces
Field cleaning before mating; commissioning kit

What Is MPO / MTP and How to Choose the Right Product
MPO vs MTP — Same Standard, Different Brand
MPO (Toso ena vuqa na fibra) is the generic multi-fiber connector standard defined in IEC 61754-7. MTP® is US Conec’s brand-name implementation of the same MPO standard, with tighter mechanical tolerances on the guide-pin holder, spring load and internal ribbon protection. Both mate with each other and both follow the same fiber count and polarity rules. Fibconet manufactures to the MPO standard and supplies MTP-compatible builds on request; the underlying optical spec is identical.
Polarity — Type A, Mataqali B, Na cavuti

Veisau
Fiber Sequence
Vakayagataki Vakatautauvata

Mataqali A (Vakadodonu)
1↔1, 2↔2 … 12↔12 straight-through
Point-to-point trunks with A-to-B duplex crossover in the patch cord

Mataqali B (Reverse)
1↔12, 2↔11 … 12↔1 fully reversed
Direct connection to SFP+ / QSFP transceivers; most common for 40G/100G breakout

Na cavuti (Pair-swap)
Adjacent pairs swapped: (1↔2, 2↔1), (3↔4, 4↔3) ...
Legacy pair-flip cabling

Polarity errors are the single most common cause of link-up failure on MPO systems. Confirm polarity at RFQ stage; we ship Type A / B / C per your bill of materials.
Gender — Male (with pins) vs Female (sega na pini)

Tagane: two guide pins protrude from the end-face. Used at fixed / patch-panel ends.
Female: sega na pini, two guide-pin holes only. Used at the equipment / movable-jumper end.

Wrong gender at RFQ = the entire batch has to be re-terminated. Always specify Male-Female, Female-Female or Male-Male at the quotation stage.
Fiber Type — Match to Data Rate and Distance

Taucoko ni Taucoko
iKadra Taucoko ni Ua
10G reach
40G / 100G reach
Vakayagataki Vakatautauvata

OM3 multimode
850 turaga
550 m
100 m / 100 m (SR4)
Short rack-to-rack, cost-sensitive builds

OM4 multimode
850 turaga
550 m
150 m / 150 m (SR4)
Standard data-center backbone

OM5 multimode
850 & 953 nm SWDM
550 m
≥ 150 m; supports 400G SR4.2
AI cluster and next-gen supercompute backbone

OS2 singlemode
1310 / 1550 turaga
10 km +
10 km + (4. / DR4)
Inter-building, keba, DCI long-haul

Insertion Loss Grade — Standard vs Low-Loss

Ivakatagedegede
Max IL per mated pair
Sa Yali na iSa vakalesuimai
Vakayagataki Vakatautauvata

iVakatagedegede (SM APC)
≤ 0.70 dB
≥ 55 dB
Enterprise LAN, standard data-center runs

Low-Loss / E dua o iko o iko, o iko, o iko, o iko. (SM APC)
≤ 0.35 dB (ivakarau 0.25 dB)
≥ 55 dB
Cabinet-to-cabinet 100G high-density backbone

Ultra Low-Loss (Japanese ferrule)
0.15 dB per single fiber
≥ 55 dB
400G / 800G AI backbone; long link budgets

iVakatagedegede (MM PC)
≤ 0.50 dB
≥ 20 dB
OM3/OM4 short data-center runs

Low-Loss (MM PC)
≤ 0.35 dB (ivakarau 0.20 dB)
≥ 20 dB
OM4/OM5 high-density backbone

iTukutuku Vakamisini

iDusidusi: the values below are family-typical across the 10 veitaravi, sega ni dua na pepa ni itukutuku ni SKU. Tarogi keda me baleta na ivakaraitaki-vakatabakidua na ripote ni veivakatovolei ena RFQ na ivakatagedegede .; keitou vakauta yani ena ruku ni naba ni tiki ni ivakaraitaki.

Kena iTuvatuva
Na Vola ni Vola ni Vakayaga
iVakamacala

Fiber count per MPO end
4 / 8 / 12 / 16 / 24 / 48 / 72
Standard 12F and 24F; 72F for 400G/800G AI backbone

Mataqali taucoko ni taucoko
laiva (652.D, G.657.A1/A2), OM3, OM4, NI5
G.657.A2 for tight-radius rack routing

Veisau
Mataqali A / Mataqali B / Na cavuti
Type B is default for 40G/100G breakout

Tagane se yalewa
Tagane (with pins) / Female (sega na pini)
Both ends selectable per port

End-face polish
APC (sega ni vakatagane se) / PC (matanivola cokovata)
APC green, PC beige/aqua

Yali ni vakacurumi (dua ga na fiber)
0.15 – 0.35 dB per grade
0.15 dB achievable with Japanese-imported ferrules

Sa yali na ilavo sa vakalesui mai
≥ 55 dB (SM APC), ≥ 45 dB (SM PC), ≥ 20 dB (MM PC)

Tudei ni veiwatini
≥ 500 ivakarau ni bula, IL drift ≤ 0.2 dB
Guide-pin positioning with elastic pre-load

O Minimimi me ra matenisuka .
MPO end ≥ 30 mm; LC breakout end ≥ 20 mm
Gauna ni Soqo 15 mm, vakasakiti 30 mm on G.657.A2 fiber

Vakasaqa rawarawa
−20°C to +60°C
Optical performance stable across the range

Ingress / suasua
IP50; 45°C / 95% RH; 24-hour salt spray
Not for long-term unprotected outdoor use unless FTTA-jacketed

Length range
0.2 ki na 300 m custom; ivakatagedegede 0.5 ki na 30 m
Ena dua na ivakaraitaki

Trunk cable OD
3.0 mm ivakarau (8/12/16/24F); ~5.0 mm (48F)
Higher fiber count = larger OD

Jakete
LSZH standard; OFNR / OFNP on request
Suitable for data hall, riser and plenum

Vakatovolea na balavu ni ua
1310 / 1550 turaga (SM), 850 / 1300 turaga (VV)

Waranti
1 yabaki; design life up to 10 veiyabaki
Field replacement covered within warranty period

Na rawa ni buli iyaya kei na kena lewai na ivakarau
Production Line and Monthly Capacity
Na cakacaka ni itubutubu ni Fibconet ena veitiki ni matailalai e tekivu mai na 1990. 1994. Na MPO / MTP line runs on dedicated equipment: automated fiber-separating jigs, sub-micron 3D polishing machines and integrated injection-molding stations for one-piece reinforcement at the breakout root instead of simple heat-shrink. Monthly output reaches 150,000 veitikina. Standard orders of several thousand pieces ship in 7–12 days; bulk orders above 20,000 pieces ship in 15–20 days.
Na lewa ni iyaya e cake
An MPO patch cord is only as good as its ferrule, its fiber and its ribbon splice. Eda lewa na stack ni upstream ka sega walega ni ikalawa ni soqoni .:

Ferrules: domestic Sanhuan ferrules on standard builds; Japanese-imported ferrules (Sumitomo class) on ultra-low-loss builds. Both selectable per order.
Taucoko ni Taucoko: YDUA YD / Taucoko ni Fiberhome / HTGD single-mode and OM3/OM4/OM5 multimode, with G.657.A2 bend-insensitive fiber for tight-radius rack routing.
Vulu aramidi: Taihe standard; DuPont Kevlar available on request.
Jacket compound: LSZH low-smoke zero-halogen resin; OFNR and OFNP grades available.
Ribbon splicing: high-precision ribbon fiber fusion splicers, core-by-core alignment.

100% Dikevi ni vinaka

Insertion loss and return loss: tested on every fiber of every finished cable with a dedicated IL/RL tester.
End-face geometry: 3D interferometer inspection; every finished ferrule end-face.
Polaridad kei na veitarataravi ni fibra: core-by-core verification against the bill of materials on every unit.
Length and appearance: mechanical measurement and visual inspection.
Batch environmental testing: high-low temperature cycling per batch.
Test reports: FLUKE / EXFO electronic reports available on request after order confirmation.

Na veivakadeitaki kei na kena muri
Fibconet cakacaka ena ruku ni dua na vakacurumi . ISO 9001 / ISO 14001 / ISO 45001 ivakarau ni veiliutaki e kovuta na vinaka, na veika bula wavoliti keda kei na bula vakacakacaka & taqomaki. Raw-material RoHS reports ship by default. Product-level compliance — CE, RAWATI, UL, ETL — is issued per model and per target market. Na kena vakayagataki na sitivikiti e duidui ena ka e buli kei na veika e gadrevi ena cakacaka. Vakauta mai vei keda na nomu makete ni takete kei na lisi ni ivakaraitaki .; we return the applicable certificate set with the quotation.
Vakataotaki, OEM kei na digidigi vakaitaukei
Standard Packaging

Each patch cord / trunk cable sealed in an individual PE bag.
Cassettes and patch panels foam-cushioned in an inner box.
Master export carton labeled with model, iwiliwili, polarity and gender code.

OEM kei na digidigi vakaitaukei

Balavu: dua na balavu mai na 0.2 m ki na 300 m, cut to your bill of materials.
Breakout leg length: individual breakout legs cut to differentiated lengths (length difference ≤ 30 cm) for staggered rack ports.
Breakout configuration: 24F to 2×12 / 3×8 / 4×6.; 16F to 2×8; 48F to 6×8; me yacova na 6 MPO connectors per single end on MPO-to-MPO breakouts.
Veisau: Mataqali A / B / C per port; internal crossover on Type B for direct SFP mating.
Ferrule grade: domestic Sanhuan or Japanese-imported per fiber-count / IL grade selection.
Jacket color: wai (OM3), erika violet (OM4), drokadroka (NI5), dromodromo (laiva), custom RAL.
Breakout root protection: sega (short runs), nylon boot (standard rack), braided sleeve (high-wear).
OEM label and printing: on connector body, PE bag and master carton.
Empaquetado personalizado: PE bag and carton design per your artwork, MOQ 30,000 pcs for full custom packaging run.
ivakaraitaki: free small-quantity samples for quality verification; only shipping cost payable, deductible from the first bulk order.

Taro e dau tarogi wasoma
Q1.. What is the difference between MPO and MTP®?
MPO is the generic IEC 61754-7 multi-fiber connector standard. MTP is US Conec’s brand-name implementation of the same standard with tighter mechanical tolerances on the guide-pin holder and internal ribbon protection. Both mate with each other. Fibconet manufactures to the MPO standard; MTP-compatible builds are available on request.
Q2.. What is the highest data rate your MPO products support?
Up to 800G. The product line supports 40G, 100G, 400G and 800G stably. For 400G / 800G AI-backbone applications we recommend 24-fiber or 72-fiber MPO with the ultra-low-loss ferrule grade to preserve link budget.
Q3.. What is the maximum fiber count per MPO end?
72 fibers per single MPO end. Standard 12F and 24F cover most 40G / 100G / 400G rack builds; 72F is used for 400G / 800G high-density AI backbone and supercompute cabling.
Q4.. Can I mix ends — MPO on one side and LC / SC / FC on the other?
Io. MPO-to-LC breakout is the most common configuration; MPO-to-SC and MPO-to-FC are also supported. Confirm the breakout connector type and quantity at RFQ.
Q5.. Are both ends symmetric on MPO-to-MPO breakout cables?
Io. For MPO-to-MPO breakouts (for example 24F into 2×12 or 3×8), the fiber count and configuration must be symmetric on both ends because every fiber core needs a one-to-one map. Me yacova na 6 MPO connectors per single end are supported.
Q6.. What polarity should I order for a 40G / 100G SR4 link?
Type B is the default for direct SFP+ / QSFP transceiver mating on 40G / 100GSR4.. The internal crossover is done inside the cable so no external cross-connect is needed. Confirm your transceiver polarity requirement at RFQ; we ship Type A / B / C per your bill of materials.
Q7.. What is the difference between standard and low-loss grade?
Standard grade holds insertion loss below 0.70 dB per mated pair; low-loss grade holds it below 0.35 dB with typical 0.25 dB. Ultra low-loss builds with Japanese ferrules reach 0.15 dB per single fiber. Low-loss and ultra low-loss are recommended for 100G high-density backbone and 400G / 800G links where every mated connector consumes link budget.
Q8.. Do you 100%-test every fiber, and do you supply FLUKE / EXFO reports?
Io. Every cable and every fiber core is tested for insertion loss, lesu tale, end-face geometry, veivakaduiduitaki, veitarataravi ni fiber, length and appearance before shipment. FLUKE / EXFO electronic test reports are available on request after order confirmation.
Q9.. Can I get samples before placing a bulk order?
Io. Free small-quantity samples are supplied for quality verification; you only cover the shipping cost, and that shipping cost is deducted from your first formal bulk order as a cooperation incentive.
Q10. What is your monthly capacity and typical lead time?
Monthly output across the MPO family is 150,000 veitikina. Standard orders of several thousand pieces ship in 7–12 days from stock. Bulk orders above 20,000 pieces ship in 15–20 days. Custom packaging with full artwork runs from an MOQ of 30,000 PCS.
Q11. Can these MPO products be used outdoors?
The standard MPO line is optimised for data hall, MDA and rack environments (IP50, −20°C to +60°C, LSZH). For outdoor and FTTA applications, use the FTTA MPO/MTP Fiber Optic Patch Cord with an outdoor jacket, or ask for a custom outdoor build. Do not deploy the standard indoor jacket in unprotected outdoor conditions.
Q12. What is the warranty?
Standard warranty is 1 yabaki; design service life is up to 10 veiyabaki. Because 100% inspection is applied on every unit, field failures are rare; when they occur within the warranty period, we ship a replacement immediately.