Konektor Cepat Alligator-Mouth SC/APC — Rakitan Lapangan Sekali Tekan Tanpa Alat

IL ≤0.5 dB (90% di dalam 0.3 dB) · RL ≥55 dB · 500 mating cycles · 15–20 year service life · 50% faster than conventional fast connectors

Ikhtisar Produk

FIBCONET Alligator-Mouth SC/APC fast connector is built around one thing installers actually care about — speed. The integrated clip body opens like an alligator’s jaw, so field engineers strip, cleave and lock the fiber in one press.

If your installers today use screw-type or two-piece fast connectors, the assembly workflow drops by roughly half — a single technician clears more FTTH nodes per shift, and the daily labor cost per activated subscriber goes down accordingly.

Every unit ships with a three-ring 1.0 mm concentricity ferrule. Insertion loss stays ≤0.5 dB across the batch, dengan 90% of units within 0.3 dB. Return loss holds at ≥55 dB. We test 100% of production before it leaves the factory, so batch acceptance on your job site tracks the batch acceptance in our test station.

The housing is molded from imported SABIC PEI — 5% harder than the domestic PEI most competitors use. That difference shows up in the tail clamp: your drop cable doesn’t slip out under tensile load, doesn’t loosen after months of vibration, doesn’t fatigue at the bend point. Rated for −40 °C to +85 °C, 500 siklus kawin, and a 15–20 year service life.

MOQ adalah 500 buah. Kapasitas bulanan adalah 5 juta buah. Mixed SKU and OEM orders supported.

Manfaat Utama

50% Faster Field Assembly — Alligator-Mouth One-Press Design

You may be a project foreman with a fixed FTTH activation quota this week. Every extra second per connector adds up across a 200-node build. The alligator-mouth clip opens sideways, accepts the cleaved fiber in one motion, and locks with a single press of the lever. Compare that to screw-type connectors where installers twist, check, back off, re-twist. On field benchmarks, this design cuts total per-connector assembly time by about 50% vs conventional fast connectors, and about 30% vs screw-type designs.

Integrated Clip Body — Fewer Parts, Fewer Mistakes

Two-piece fast connectors ask the installer to align two housing halves under a bent-fiber condition. In poor lighting, in a wall-mounted junction box, in the rain, that’s when misalignment happens and insertion loss climbs. The alligator-mouth is a single-body clip — the ferrule, alignment groove and clamp are pre-mated at the factory. Installers can’t misalign what’s already aligned.

Insertion Loss You Can Ship

Three-ring 1.0 mm concentricity ferrules keep IL ≤0.5 dB across every batch, dengan 90% of units testing within 0.3 dB. RL ≥55 dB. Every unit measured before shipment, not sample-batched. Your first-time acceptance rate on site tracks the number we already verified in-house.

Rated for Real-World FTTH Conditions

Verified at −40 °C to +85 °C, 85% RH humidity, and 96-hour salt-fog cycling. IL variation stays ≤0.30 dB across the full envelope. Test reports available with shipment on request. Whether you deploy in tropical humidity, coastal salt-fog, or cold-climate aerial spans, day-one performance is also year-fifteen performance.

Reusable ≥5 Times — Field Re-Work Doesn’t Cost You a Unit

Installers make mistakes — fiber cut short, wrong routing, wrong cable insertion. The alligator clip re-opens up to 5 times without losing hold strength, so a rework doesn’t waste a unit. Mating durability holds at 500 cycles — well above typical FTTH service demand.

Compact Body — Fits Where Others Don’t

Slim housing fits neatly into dense wiring environments: lemari arus lemah, kotak sambungan, MDU risers, ONT ports crowded with patch cords. Two length options (55 mm di dalam ruangan / 60 mm di luar ruangan) let you match the enclosure without forcing cable bend radius.

Precision-Engineered Structure

Three functional components. Zero specialty tools required.

• Green SC/APC connector body — molded from SABIC PEI, with dust cap and snap clip; 5% harder than domestic PEI, better tensile clamping.
• Alligator-mouth clamp body — open-lid one-press splice mechanism; the mechanical heart of the 50% speed gain.
• Black locking tail cap — screw-lock design; fits 2.0 mm bulat, 3.0 mm round and 2×3 mm flat drop cable without any adapter.

Spesifikasi teknis

Six steps.

1. Mengupas the fiber coating with a Miller clamp.
2. Membersihkan the bare fiber with an alcohol wipe.
3. Cleave the fiber, leaving 10 mm of bare fiber.
4. Insert the fiber into the connector tail until it bends slightly (visual go/no-go).
5. Press the alligator-clip lever to lock the fiber in place.
6. Baut the tail cap and dust cap on — assembly done.

A trained installer completes the full six-step cycle in seconds, not minutes. Every connector kit ships with 100 lint-free cleaning wipes and 2 fiber cleave-length gauges, so your field team starts working immediately after unboxing.