MPO Serie

MPO / MTP Data Center Cabling Fabrikant - Kassetten, Patch Panels, Trunk Kabelen a Patch Cords
Fibconet fabrizéiert 10 Serie vun MPO / MTP Léngen OPTIC Produiten fir 40g, 100G, 400G an 800G Datenzenter Kabelen. D'Produktlinn deckt Kassettmoduler, 1U Rack Patch Brieder, MPO Trunk a Patchschnouer, MPO-zu-LC Ausbroch, Loopbacks a MPO / MTP Botzmëttelen - genuch fir e vollen Héichdichtverbindung vun der MDA op de Schalterhafen ze bauen ouni en zweeten Zouliwwerer ze addéieren.

Produktioun leeft op engagéierten MPO poléieren, Band Splicing an 3D Interferometer Inspektioun Linnen. Monatlecht Ausgang erreecht 150,000 Stécker an der MPO Famill. D'Zuel vun de Faser geet erop 72 Faseren pro MPO Enn fir 400G / 800G Backbone Uwendungen. Single-Fiber Aféierung Verloscht kann kontrolléiert ginn 0.15 dB op Versammlungen gebaut mat japanesch importéiert Hülsen, an zu typesch 0,20-0,35 dB op Standard baut mat Gewalt Sanhuan ferrules.

All fäerdeg Kabel ass 100% iwwerpréift fir Aféierungsverloscht, zréck Verloscht, Enn-Gesiicht Geometrie, Polaritéit, Faser Sequenz, Längt an Erscheinung. FLUKE / EXFO elektronesch Testberichter sinn no der Bestätegung vun der Bestellung verfügbar. Produkter verschécken de Moment an Hyperskala, Telekom- an Enterprise-Datenzentrumprojeten an den USA, Kanada, Däitschland, UK an Holland.
10 MPO / MTP Produkter Mir Fabrikatioun
Grupp 1 - Kassettmoduler
Pre-terminated MPO-zu-LC oder MPO-zu-MPO Konversiounskassetten fir 1U Rack Panels. De Bausteen vun all High-Density Data-Center Rei.

Modell
Fiber Zuel
Interzäit
Typesch Benotzung

Fiber Optic MPO 1U 12–144 Cores Kassettmodul
12 zu 144
MPO Trunk an / LC Duplex eraus
Standard MDA-zu-EDA Konversioun

12/24 Kär High-Density Solution MPO Kassett Modul
12 oder 24
MPO an / LC eraus
Kompakt Rack baut mat 12F oder 24F MPO Basis

8/12/24 MPO MTP Basis fir 24 LC Ultra High Dicht 1u modulär
Bis 24 LC pro 1 U
MPO/MTP an / 24 LC eraus
Den héchste Wäert vun 1U; AI Stärekoup an Hyperskala Reihen

Grupp 2 - Rack Patch Panels
Eidel oder virgesammelt 1U 19-Zoll Chassis fir Kassettmoduler ze halen an Trunkkabel uewen um Rack ze organiséieren.

Modell
Rack Gréisst
Lueden
Typesch Benotzung

Data Center 19-Zoll Standard Rack MPO Patch Panel
1U
Eidel Chassis fir Kassetten
Standard MDA Rack, modulär bauen

Pre-montéiert 1U 19-Zoll Rack LC MTP®/MPO Patch Panel
1U
Pre-terminéiert LC viischt, MPO zréck
Plug-and-Play Rack, keen Terrain Assemblée

Grupp 3 - Patch Cords an Trunk Kabelen

Déi kierperlech Verbindung tëscht MPO Kassetten, patch panels, transceivers an MPO Réckemuerch leeft.

Modell
Struktur
Fiber Optiounen
Typesch Benotzung

Fabréck Viraussetzung MPO-MPO 3.0mm LSZH Patch Cord / Stammkabel
MPO zu MPO
OS2 / OM3 / OM4 / OM5
Backbone Stamm, MDA zu EDA

Fiber Optic MPO MTP Connector Patch Cord
MPO zu MPO
OS2 / OM3 / OM4 / OM5
Rack-zu-Rack kuerzen Jumper

FTTA MPO/MTP Fiber Optic Patch Cord Kabel
MPO zu MPO, baussecht jacket
OS2 / OM3 / OM4
Base Station FTTA an Outdoor kuerz Link

Grupp 4 — Loopback
Benotzt fir Transceiver Ports ze testen, Kassett Kontinuitéit an Zännstaang Integritéit ouni eng voll Trunk Link zitt.

Modell
Interzäit
Fiber
Typesch Benotzung

OM3 MM MTP / APC Weiblech MPO Loopback
MTP / APC weiblech
OM3 multimode
Multimode Transceiver a Kassetttest

Grupp 5 - Botzen Tools
End-Gesiicht Kontaminatioun ass déi eenzeg gréisste Ursaach vu MPO Insertion-Verloscht Feeler. Ee qualifizéierte Botzmëttel pro Rack ass Standardprojetpraxis.

Modell
Passt
Typesch Benotzung

All Zorten passen MPO / MTP propper
All MPO / MTP Enn-Gesiichter
Terrain Botzen virun mating; Kommissioun Kit

Wat ass MPO / MTP a wéi Dir de richtege Produkt wielt
MPO vs MTP - Selwechte Standard, Verschidde Mark
MPO (Multi-Fiber Push On) ass de generesche Multi-Fiber Connector Standard definéiert am IEC 61754-7. MTP® ass d'US Conec Markennumm Implementatioun vum selwechte MPO Standard, mat méi enk mechanesch Toleranzen op de Guide-Pin Holder, Fréijoerslast an intern Bandschutz. Both mate with each other and both follow the same fiber count and polarity rules. Fibconet manufactures to the MPO standard and supplies MTP-compatible builds on request; the underlying optical spec is identical.
Polarity — Type A, Typ B, Typ C

Polaritéit
Fiber Sequence
Typesch Benotzung

Typ A (Riichtaus)
1↔1, 2↔2 … 12↔12 straight-through
Point-to-point trunks with A-to-B duplex crossover in the patch cord

Typ B (Reverse)
1↔12, 2↔11 … 12↔1 fully reversed
Direct connection to SFP+ / QSFP transceivers; most common for 40G/100G breakout

Typ C (Pair-swap)
Adjacent pairs swapped: (1↔2, 2↔1), (3↔4, 4↔3) …
Legacy pair-flip cabling

Polarity errors are the single most common cause of link-up failure on MPO systems. Confirm polarity at RFQ stage; we ship Type A / B / C per your bill of materials.
Gender — Male (with pins) vs Female (no pins)

Male: two guide pins protrude from the end-face. Used at fixed / patch-panel ends.
Female: no pins, two guide-pin holes only. Used at the equipment / movable-jumper end.

Wrong gender at RFQ = the entire batch has to be re-terminated. Always specify Male-Female, Female-Female or Male-Male at the quotation stage.
Fiber Type — Match to Data Rate and Distance

Fiber
Wellelängt
10G reach
40G / 100G reach
Typesch Benotzung

OM3 multimode
850 nm
550 m
100 m / 100 m (SR4)
Short rack-to-rack, cost-sensitive builds

OM4 multimode
850 nm
550 m
150 m / 150 m (SR4)
Standard data-center backbone

OM5 multimode
850 & 953 nm SWDM
550 m
≥ 150 m; supports 400G SR4.2
AI cluster and next-gen supercompute backbone

OS2 singlemode
1310 / 1550 nm
10 km +
10 km + (Lr4 / DR4)
Inter-building, campus, DCI long-haul

Insertion Loss Grade — Standard vs Low-Loss

Grad
Max IL per mated pair
Retour Verloscht
Typesch Benotzung

Standard (SM APC)
≤ 0.70 dB
≥ 55 dB
Enterprise LAN, standard data-center runs

Low-Loss / Elite (SM APC)
≤ 0.35 dB (typesch 0.25 dB)
≥ 55 dB
Cabinet-to-cabinet 100G high-density backbone

Ultra Low-Loss (Japanese ferrule)
0.15 dB per single fiber
≥ 55 dB
400G / 800G AI backbone; long link budgets

Standard (MM PC)
≤ 0.50 dB
≥ 20 dB
OM3/OM4 short data-center runs

Low-Loss (MM PC)
≤ 0.35 dB (typesch 0.20 dB)
≥ 20 dB
OM4 / OM5 High-Dicht Réckgrat

Technesch Spezifikatioune

Note: d'Wäerter ënnert sinn Famill-typesch ganze 10 Serie, net eng Single-SKU Dateblatt. Frot eis fir de modellspezifesche Testbericht op der RFQ Stadium; mir schécken et ënnert dem Modell Deel Zuel.

Parameter
Typesch Wäert
Kommentéieren

Faserzuel pro MPO Enn
4 / 8 / 12 / 16 / 24 / 48 / 72
Standard 12F an 24F; 72F fir 400G / 800G AI Réckgrat

Fiber Typ
OS2 (G.652.D, G.657.A1/A2), OM3, OM4, OM5
G.657.A2 fir knapper Radius Rack Routing

Polaritéit
Typ A / Typ B / Typ C
Typ B ass Standard fir 40G / 100G Breakout

Geschlecht
Male (with pins) / Female (no pins)
Béid Enden auswielbar pro Hafen

Enn-Gesiicht poléieren
APC (singlemode) / PC (multimode)
APC gréng, PC beige/aqua

Insertéierungsverloscht (eenzel Faser)
0.15 - 0.35 dB pro Grad
0.15 dB erreechbar mat japanesch importéierten Hülsen

Retour Verloscht
≥ 55 dB (SM APC), ≥ 45 dB (SM PC), ≥ 20 dB (MM PC)

Mating Haltbarkeet
≥ 500 Zyklen, IL Operatioun ≤ 0.2 dB
Guide-Pin Positionéierung mat elastesche Virlast

Minimum Béi Radius
MPO Enn ≥ 30 mm; LC Ausbroch Enn ≥ 20 mm
Statesch 15 mm, dynamesch 30 mm op G.657.A2 Léngen

Operatioun Temperatur
-20°C bis +60°C
Optesch Leeschtung stabil iwwer d'Gamme

Ingress / fiichtegkeet
IP50; 45°C / 95% RH; 24-Stonn Salz Spraydousen
Net fir laangfristeg ongeschützt Outdoor benotzen, ausser FTTA-jacket

Längt Gamme
0.2 zu 300 m Benotzerdefinéiert; · Einfach fir ze montéieren mat der mechanescher Split a kee Polieren · Den Defektquote minimiséieren duerch Features vun der Entfernung a wiederverwendbarer 0.5 zu 30 m
Pro Modell

Stammkabel OD
3.0 mm typesch (8/12/16/24F); ~5,0 mm (48F)
Méi Faserzuel = méi grouss OD

Jackett
LSZH Norm; OFNR / OFNP op Ufro
Gëeegent fir daten Hal, Riser an Plenum

Test Wellelängt
1310 / 1550 nm (SM), 850 / 1300 nm (MM)

Garantie
1 Joer; Design Liewen bis zu 10 Joer
Field replacement covered within warranty period

Fabrikatioun Kapazitéit a Qualitéitskontroll
Production Line and Monthly Capacity
Dem Fibconet seng Elterendeel Operatioun an opteschen passive Komponenten staamt zréck op 1994. Den MPO / MTP line runs on dedicated equipment: automated fiber-separating jigs, sub-micron 3D polishing machines and integrated injection-molding stations for one-piece reinforcement at the breakout root instead of simple heat-shrink. Monatlecht Ausgang erreecht 150,000 Stécker. Standard orders of several thousand pieces ship in 7–12 days; bulk orders above 20,000 pieces ship in 15–20 days.
Upstream Material Kontroll
An MPO patch cord is only as good as its ferrule, its fiber and its ribbon splice. Mir kontrolléieren den Upstream Stack anstatt nëmmen de Montage Schrëtt:

Ferrules: domestic Sanhuan ferrules on standard builds; Japanese-imported ferrules (Sumitomo class) on ultra-low-loss builds. Both selectable per order.
Fiber: YOFC / Fiberhome / HTGD single-mode and OM3/OM4/OM5 multimode, with G.657.A2 bend-insensitive fiber for tight-radius rack routing.
Aramid Garn: Taihe standard; DuPont Kevlar available on request.
Jacket compound: LSZH low-smoke zero-halogen resin; OFNR and OFNP grades available.
Ribbon splicing: high-precision ribbon fiber fusion splicers, core-by-core alignment.

100% Qualitéit Inspektioun

Insertion loss and return loss: tested on every fiber of every finished cable with a dedicated IL/RL tester.
End-face geometry: 3D interferometer inspection; every finished ferrule end-face.
Polaritéit a Faser Sequenz: core-by-core verification against the bill of materials on every unit.
Length and appearance: mechanical measurement and visual inspection.
Batch environmental testing: high-low temperature cycling per batch.
Test reports: FLUKE / EXFO electronic reports available on request after order confirmation.

Zertifizéierungen a Konformitéit
Fibconet bedreift ënner engem integréiert ISO 9001 / ISO 14001 / ISO 45001 Management System deckt Qualitéit, Ëmwelt a Beruffsgesondheet & Sécherheet. Raw-material RoHS reports ship by default. Product-level compliance — CE, REACH, den, ETL — is issued per model and per target market. Certification applicability varies by product and project requirements. Send us your target market and the model list; we return the applicable certificate set with the quotation.
Verpakung, OEM and Custom Options
Standard Verpakung

Each patch cord / trunk cable sealed in an individual PE bag.
Cassettes and patch panels foam-cushioned in an inner box.
Master export carton labeled with model, Quantitéit, polarity and gender code.

OEM and Custom Options

Längt: any length from 0.2 m zu 300 m, cut to your bill of materials.
Breakout leg length: individual breakout legs cut to differentiated lengths (length difference ≤ 30 cm) for staggered rack ports.
Breakout configuration: 24F to 2×12 / 3× 8 / 4×6; 16F to 2×8; 48F to 6×8; bis 6 MPO connectors per single end on MPO-to-MPO breakouts.
Polaritéit: Typ A / B / C per port; internal crossover on Type B for direct SFP mating.
Ferrule grade: domestic Sanhuan or Japanese-imported per fiber-count / IL grade selection.
Jacket color: aqua (OM3), erika violet (OM4), lime gréng (OM5), Giel (OS2), custom RAL.
Breakout root protection: keng (short runs), nylon boot (standard rack), braided sleeve (high-wear).
OEM label and printing: on connector body, PE bag and master carton.
Benotzerdefinéiert Verpakung: PE bag and carton design per your artwork, MOQ 30,000 pcs for full custom packaging run.
Echantillon: free small-quantity samples for quality verification; only shipping cost payable, deductible from the first bulk order.

Oft gestallte Froen
Q1. What is the difference between MPO and MTP®?
MPO is the generic IEC 61754-7 multi-fiber connector standard. MTP is US Conec’s brand-name implementation of the same standard with tighter mechanical tolerances on the guide-pin holder and internal ribbon protection. Both mate with each other. Fibconet manufactures to the MPO standard; MTP-compatible builds are available on request.
Q2. What is the highest data rate your MPO products support?
Up to 800G. The product line supports 40G, 100G, 400G and 800G stably. For 400G / 800G AI-Réckgratapplikatioune recommandéiere mir 24-Faser oder 72-Faser MPO mat der ultra-niddereg-Verloscht Ferrule Grad fir Link Budget ze erhaalen.
Q3. Wat ass déi maximal Faserzuel pro MPO Enn?
72 Faseren pro eenzel MPO Enn. Standard 12F an 24F decken déi meescht 40G / 100G / 400G Rack baut; 72F gëtt fir 400G benotzt / 800G High-Density AI Réckgrat an Supercompute Kabling.
Q4. Kann ech Enden mëschen - MPO op enger Säit an LC / SC / FC op der anerer?
Jo. MPO-zu-LC Breakout ass déi allgemeng Konfiguratioun; MPO-zu-SC an MPO-zu-FC ginn och ënnerstëtzt. Bestätegt de Breakout Connector Typ a Quantitéit bei RFQ.
q5. Sinn béid Enden symmetresch op MPO-zu-MPO Breakout Kabelen?
Jo. Fir MPO-zu-MPO Ausbroch (zum Beispill 24F an 2 × 12 oder 3 × 8), d'Faserzuel an d'Konfiguratioun musse symmetresch op béide Enden sinn well all Faserkär eng een-zu-een Kaart brauch. Bis 6 MPO Stecker pro eenzegen Enn ginn ënnerstëtzt.
Q6. Wéi eng Polaritéit soll ech fir e 40G bestellen / 100G SR4 Link?
Typ B ass de Standard fir direkt SFP + / QSFP transceiver mating op 40G / 100GSR 4. Den internen Crossover gëtt am Kabel gemaach sou datt keen externe Cross-Connect néideg ass. Confirméiert Är Transceiver Polaritéit Ufuerderung bei RFQ; we ship Type A / B / C per your bill of materials.
q7. Wat ass den Ënnerscheed tëscht Standard a Low-Loss Grad?
Standardgrad hält Insertiounsverloscht ënnen 0.70 dB pro gepaart Paar; niddereg-Verloscht Grad hält et ënnert 0.35 dB mat typesch 0.25 dB. Ultra niddereg-Verloscht baut mat japanesche Hülsen erreechen 0.15 dB pro eenzel Faser. Niddereg Verloscht an Ultra Niddereg Verloscht gi fir 100G High-Density Backbone a 400G recommandéiert / 800G Linken wou all matte Connector Linkbudget verbraucht.
q8. Hutt Dir 100%-Test all Faser, a liwwert Dir FLUKE / EXFO bericht?
Jo. All Kabel an all Faserkär gëtt getest fir Insertiounsverloscht, zréck Verloscht, Enn-Gesiicht Geometrie, Polaritéit, Faser Sequenz, length and appearance before shipment. FLUKE / EXFO electronic test reports are available on request after order confirmation.
q9. Can I get samples before placing a bulk order?
Jo. Free small-quantity samples are supplied for quality verification; you only cover the shipping cost, and that shipping cost is deducted from your first formal bulk order as a cooperation incentive.
Q10. What is your monthly capacity and typical lead time?
Monthly output across the MPO family is 150,000 Stécker. Standard orders of several thousand pieces ship in 7–12 days from stock. Bulk orders above 20,000 pieces ship in 15–20 days. Custom packaging with full artwork runs from an MOQ of 30,000 pcs.
Q11. Can these MPO products be used outdoors?
The standard MPO line is optimised for data hall, MDA and rack environments (IP50, -20°C bis +60°C, LSZH). For outdoor and FTTA applications, use the FTTA MPO/MTP Fiber Optic Patch Cord with an outdoor jacket, or ask for a custom outdoor build. Do not deploy the standard indoor jacket in unprotected outdoor conditions.
Q12. What is the warranty?
Standard warranty is 1 Joer; design service life is up to 10 Joer. Because 100% inspection is applied on every unit, field failures are rare; when they occur within the warranty period, we ship a replacement immediately.