MPO-serie

MPO / MTP Data Center Cabling Manufacturer — Cassettes, Patch Panels, Trunk Cables and Patch Cords
Fibconet produceert 10 series of MPO / MTP fiber optic products for 40G, 100G, 400G and 800G data center cabling. The product line covers cassette modules, 1U rack patch panels, MPO trunk and patch cords, MPO-to-LC breakouts, loopbacks and MPO/MTP cleaners — enough to build a full high-density link from the MDA to the switch port without adding a second supplier.

Production runs on dedicated MPO polishing, ribbon splicing and 3D interferometer inspection lines. Monthly output reaches 150,000 stukken across the MPO family. Fiber count scales up to 72 fibers per MPO end for 400G/800G backbone applications. Single-fiber insertion loss can be controlled to 0.15 dB on assemblies built with Japanese-imported ferrules, and to typical 0.20–0.35 dB on standard builds with domestic Sanhuan ferrules.

Every finished cable is 100% inspected for insertion loss, terugkeer verlies, end-face geometry, polariteit, vezelsequentie, lengte en uitstraling. FLUKE / EXFO electronic test reports are available after order confirmation. Products currently ship into hyperscale, telecom and enterprise data-center projects in the US, Canada, Germany, UK and Netherlands.
10 MPO / MTP Products We Manufacture
Groep 1 — Cassette Modules
Pre-terminated MPO-to-LC or MPO-to-MPO conversion cassettes for 1U rack panels. The building block of any high-density data-center row.

Model
aantal vezels
Interface
Typisch gebruik

Fiber Optic MPO 1U 12–144 Cores Cassette Module
12 naar 144
MPO trunk in / LC duplex out
Standard MDA-to-EDA conversion

12/24 Kernoplossing met hoge dichtheid MPO-cassettemodule
12 of 24
MPO in / LC out
Compact rack builds with 12F or 24F MPO base

8/12/24 MPO MTP -basis 24 LC Ultra High Density 1U modulair
Tot 24 LC per 1U
MPO/MTP in / 24 LC out
Highest 1U density; AI cluster and hyperscale rows

Groep 2 — Rack Patch Panels
Empty or pre-assembled 1U 19-inch chassis to hold cassette modules and to organise trunk cables at the top of the rack.

Model
Rack Size
Loading
Typisch gebruik

Data Center 19-inch Standard Rack MPO Patch Panel
1u
Empty chassis for cassettes
Standard MDA rack, modular build

Pre-assembled 1U 19-inch Rack LC MTP®/MPO Patch Panel
1u
Pre-terminated LC front, MPO back
Plug-and-play rack, no field assembly

Groep 3 — Patch Cords and Trunk Cables

The physical link between MPO cassettes, patchpanelen, transceivers and MPO backbone runs.

Model
Structuur
Fiber Options
Typisch gebruik

Factory Pre-termination MPO-MPO 3.0mm LSZH Patch Cord / Trunk Cable
MPO to MPO
OS2 / OM3 / OM4 / OM5
Backbone trunk, MDA to EDA

Glasvezel MPO MTP-connector patchkabel
MPO to MPO
OS2 / OM3 / OM4 / OM5
Rack-to-rack short jumper

FTTA MPO/MTP Fiber Optic Patch Cord Cable
MPO to MPO, outdoor jacket
OS2 / OM3 / OM4
Base station FTTA and outdoor short link

Groep 4 — Loopback
Used to test transceiver ports, cassettecontinuïteit en rekintegriteit zonder een volledige trunklink te trekken.

Model
Interface
Vezel
Typisch gebruik

OM3 MM MTP/APC Vrouwelijke MPO Loopback
MTP/APC vrouwelijk
OM3 multimodus
Multimode transceiver en cassettetest

Groep 5 — Reinigingsgereedschap
Contaminatie van het eindoppervlak is de grootste oorzaak van mislukte MPO-insertieverlies. Eén gekwalificeerde schoonmaker per rek is standaard projectpraktijk.

Model
Monteren
Typisch gebruik

Alle soorten passen MPO/MTP -reiniger
Alle MPO/MTP-eindvlakken
Veldreiniging vóór het paren; inbedrijfstellingsset

Wat is MPO / MTP en hoe u het juiste product kiest
MPO versus MTP: dezelfde standaard, Ander merk
MPO (Push-on van meerdere vezels) is de generieke multivezelconnectorstandaard gedefinieerd in IEC 61754-7. MTP® is de merknaamimplementatie van US Conec van dezelfde MPO-standaard, met nauwere mechanische toleranties op de geleidepenhouder, veerbelasting en interne lintbescherming. Beide passen bij elkaar en volgen beide dezelfde regels voor het aantal vezels en de polariteit. Fibconet produceert volgens de MPO-standaard en levert op verzoek MTP-compatibele builds; de onderliggende optische specificaties zijn identiek.
Polariteit — Type A, Type B, Type C

Polariteit
Vezelreeks
Typisch gebruik

Type A (Direct)
1↔1, 2↔2 … 12↔12 rechtdoor
Point-to-point-trunks met A-naar-B duplex crossover in de patchkabel

Type B (Achteruit)
1↔12, 2↔11 … 12↔1 volledig omgekeerd
Directe verbinding met SFP+ / QSFP-zendontvangers; meest gebruikelijk voor 40G/100G-uitbraak

Type C (Paar-wissel)
Aangrenzende paren verwisseld: (1↔2, 2↔1), (3↔4, 4↔3) …
Oudere pair-flip-bekabeling

Polariteitsfouten zijn de meest voorkomende oorzaak van verbindingsfouten op MPO-systemen. Bevestig de polariteit in de offerteaanvraagfase; wij verzenden Type A / B / C volgens uw stuklijst.
Geslacht — Man (met pinnen) versus vrouwelijk (geen pinnen)

Mannelijk: two guide pins protrude from the end-face. Used at fixed / patch-panel ends.
Female: geen pinnen, two guide-pin holes only. Used at the equipment / movable-jumper end.

Wrong gender at RFQ = the entire batch has to be re-terminated. Always specify Male-Female, Female-Female or Male-Male at the quotation stage.
Fiber Type — Match to Data Rate and Distance

Vezel
Golflengte
10G reach
40G / 100G reach
Typisch gebruik

OM3 multimodus
850 nm
550 m
100 m / 100 m (SR4)
Short rack-to-rack, cost-sensitive builds

OM4 multimode
850 nm
550 m
150 m / 150 m (SR4)
Standard data-center backbone

OM5 multimode
850 & 953 nm SWDM
550 m
≥ 150 m; supports 400G SR4.2
AI cluster and next-gen supercompute backbone

OS2 singlemode
1310 / 1550 nm
10 km +
10 km + (LR4 / DR4)
Inter-building, campus, DCI long-haul

Insertion Loss Grade — Standard vs Low-Loss

Cijfer
Max IL per mated pair
Terugkeer verlies
Typisch gebruik

Standaard (SM APC)
≤ 0.70 dB
≥ 55 dB
Enterprise LAN, standard data-center runs

Low-Loss / Elite (SM APC)
≤ 0.35 dB (typisch 0.25 dB)
≥ 55 dB
Cabinet-to-cabinet 100G high-density backbone

Ultra Low-Loss (Japanese ferrule)
0.15 dB per single fiber
≥ 55 dB
400G / 800G AI backbone; long link budgets

Standaard (MM PC)
≤ 0.50 dB
≥ 20 dB
OM3/OM4 short data-center runs

Low-Loss (MM PC)
≤ 0.35 dB (typisch 0.20 dB)
≥ 20 dB
OM4/OM5 high-density backbone

Technische specificaties

Opmerking: the values below are family-typical across the 10 serie, geen gegevensblad met één SKU. Vraag ons om het modelspecifieke testrapport in de RFQ-fase; we sturen het onder het modelonderdeelnummer.

Parameter
Typische waarde
Opmerking

Fiber count per MPO end
4 / 8 / 12 / 16 / 24 / 48 / 72
Standard 12F and 24F; 72F for 400G/800G AI backbone

vezeltype
OS2 (G.652.D, G.657.A1/A2), OM3, OM4, OM5
G.657.A2 for tight-radius rack routing

Polariteit
Type A / Type B / Type C
Type B is default for 40G/100G breakout

Geslacht
Mannelijk (met pinnen) / Female (geen pinnen)
Both ends selectable per port

End-face polish
APC (enkele modus) / pc (multimode)
APC green, PC beige/aqua

invoegverlies (enkele vezel)
0.15 – 0.35 dB per grade
0.15 dB achievable with Japanese-imported ferrules

Terugkeer verlies
≥ 55 dB (SM APC), ≥ 45 dB (SM PC), ≥ 20 dB (MM PC)

Paring duurzaamheid
≥ 500 cycli, IL drift ≤ 0.2 dB
Guide-pin positioning with elastic pre-load

Minimale buigradius
MPO end ≥ 30 mm; LC breakout end ≥ 20 mm
Statisch 15 mm, dynamisch 30 mm on G.657.A2 fiber

Bedrijfstemperatuur
−20°C to +60°C
Optical performance stable across the range

Ingress / vochtigheid
IP50; 45° C / 95% RH; 24-hour salt spray
Not for long-term unprotected outdoor use unless FTTA-jacketed

Length range
0.2 naar 300 m custom; · Distributieframe · FTTH · Glasvezel netwerkapparatuur · Kabeltelevisienetwerk 0.5 naar 30 m
Per model

Trunk cable OD
3.0 mm typisch (8/12/16/24F); ~5.0 mm (48F)
Higher fiber count = larger OD

Jasje
LSZH standard; OFNR / OFNP on request
Suitable for data hall, riser and plenum

Golflengte testen
1310 / 1550 nm (SM), 850 / 1300 nm (MM)

Garantie
1 jaar; design life up to 10 jaar
Field replacement covered within warranty period

Productiecapaciteit en kwaliteitscontrole
Production Line and Monthly Capacity
De moederactiviteit van Fibconet op het gebied van optische passieve componenten dateert uit 1994. De MPO / MTP line runs on dedicated equipment: automated fiber-separating jigs, sub-micron 3D polishing machines and integrated injection-molding stations for one-piece reinforcement at the breakout root instead of simple heat-shrink. Monthly output reaches 150,000 stukken. Standard orders of several thousand pieces ship in 7–12 days; bulk orders above 20,000 pieces ship in 15–20 days.
Stroomopwaartse materiaalcontrole
An MPO patch cord is only as good as its ferrule, its fiber and its ribbon splice. Wij controleren de stroomopwaartse stapel in plaats van alleen de assemblagestap:

Adereindhulzen: domestic Sanhuan ferrules on standard builds; Japanese-imported ferrules (Sumitomo class) on ultra-low-loss builds. Both selectable per order.
Vezel: YOFC / Fiberhome / HTGD single-mode and OM3/OM4/OM5 multimode, with G.657.A2 bend-insensitive fiber for tight-radius rack routing.
Aramide garen: Taihe standard; DuPont Kevlar available on request.
Jacket compound: LSZH low-smoke zero-halogen resin; OFNR and OFNP grades available.
Ribbon splicing: high-precision ribbon fiber fusion splicers, core-by-core alignment.

100% Kwaliteitsinspectie

Insertion loss and return loss: tested on every fiber of every finished cable with a dedicated IL/RL tester.
End-face geometry: 3D interferometer inspection; every finished ferrule end-face.
Polariteit en vezelvolgorde: core-by-core verification against the bill of materials on every unit.
Length and appearance: mechanical measurement and visual inspection.
Batch environmental testing: high-low temperature cycling per batch.
Test reports: FLUKE / EXFO electronic reports available on request after order confirmation.

Certificeringen en naleving
Fibconet opereert onder een geïntegreerd ISO 9001 / ISO 14001 / ISO 45001 managementsysteem voor kwaliteit, milieu en arbeidsgezondheid & veiligheid. RoHS-rapporten over grondstoffen worden standaard verzonden. Naleving op productniveau — CE, BEREIK, de, ETL — wordt uitgegeven per model en per doelmarkt. De toepasbaarheid van de certificering verschilt per product- en projectvereisten. Stuur ons uw doelgroep en de modellenlijst; wij sturen de betreffende certificaatset terug bij de offerte.
Verpakking, OEM- en aangepaste opties
Standaard verpakking

Elk patchsnoer / trunkkabel verzegeld in een individuele PE-zak.
Cassettes en patchpanelen met schuimvulling in een binnendoos.
Omdoos met etiket met model, hoeveelheid, polariteit en gendercode.

OEM- en aangepaste opties

Lengte: elke lengte vanaf 0.2 m tot 300 m, gesneden op uw stuklijst.
Uitbraakbeenlengte: individuele breakout-poten op verschillende lengtes gesneden (lengteverschil ≤ 30 cm) voor gespreide rackpoorten.
Breakout-configuratie: 24F tot 2×12 / 3×8 / 4×6; 16F tot 2×8; 48F tot 6×8; tot 6 MPO connectors per single end on MPO-to-MPO breakouts.
Polariteit: Type A / B / C per port; internal crossover on Type B for direct SFP mating.
Ferrule grade: domestic Sanhuan or Japanese-imported per fiber-count / IL grade selection.
Kleur jas: aquatisch (OM3), erika violet (OM4), limoengroen (OM5), geel (OS2), custom RAL.
Breakout root protection: geen (short runs), nylon boot (standard rack), braided sleeve (high-wear).
OEM label and printing: on connector body, PE bag and master carton.
Aangepaste verpakking: PE bag and carton design per your artwork, MOQ 30,000 pcs for full custom packaging run.
Monsters: free small-quantity samples for quality verification; only shipping cost payable, deductible from the first bulk order.

Veelgestelde vragen
Q1. What is the difference between MPO and MTP®?
MPO is the generic IEC 61754-7 multi-fiber connector standard. MTP is US Conec’s brand-name implementation of the same standard with tighter mechanical tolerances on the guide-pin holder and internal ribbon protection. Beiden paren met elkaar. Fibconet produceert volgens de MPO-standaard; MTP-compatibele builds zijn op aanvraag verkrijgbaar.
Vraag 2. Wat is de hoogste datasnelheid die uw MPO-producten ondersteunen?
Tot 800G. De productlijn ondersteunt 40G, 100G, 400G en 800G stabiel. Voor 400G / 800G AI-backbone-toepassingen raden wij 24-vezels of 72-vezels MPO aan met de ultra-low-loss ferrule-kwaliteit om het linkbudget te behouden.
Q3. Wat is het maximale aantal vezels per MPO-uiteinde?
72 vezels per enkel MPO-uiteinde. Standaard 12F en 24F dekken de meeste 40G / 100G / 400G-rack bouwt; 72F wordt gebruikt voor 400G / 800G AI-backbone en supercomputerbekabeling met hoge dichtheid.
Q4. Kan ik de uiteinden mixen - MPO aan één kant en LC / SC / FC aan de andere kant?
Ja. MPO-naar-LC breakout is de meest voorkomende configuratie; MPO-naar-SC en MPO-naar-FC worden ook ondersteund. Bevestig het type breakout-connector en de hoeveelheid op de offerteaanvraag.
Vraag 5. Are both ends symmetric on MPO-to-MPO breakout cables?
Ja. For MPO-to-MPO breakouts (for example 24F into 2×12 or 3×8), the fiber count and configuration must be symmetric on both ends because every fiber core needs a one-to-one map. Tot 6 MPO connectors per single end are supported.
Vraag 6. What polarity should I order for a 40G / 100G SR4 link?
Type B is the default for direct SFP+ / QSFP transceiver mating on 40G / 100G SR4. The internal crossover is done inside the cable so no external cross-connect is needed. Confirm your transceiver polarity requirement at RFQ; wij verzenden Type A / B / C volgens uw stuklijst.
Vraag 7. What is the difference between standard and low-loss grade?
Standard grade holds insertion loss below 0.70 dB per mated pair; low-loss grade holds it below 0.35 dB with typical 0.25 dB. Ultra low-loss builds with Japanese ferrules reach 0.15 dB per single fiber. Low-loss and ultra low-loss are recommended for 100G high-density backbone and 400G / 800G links where every mated connector consumes link budget.
Vraag 8. Do you 100%-test every fiber, and do you supply FLUKE / EXFO reports?
Ja. Every cable and every fiber core is tested for insertion loss, terugkeer verlies, end-face geometry, polariteit, vezelsequentie, length and appearance before shipment. FLUKE / EXFO electronic test reports are available on request after order confirmation.
Vraag 9. Can I get samples before placing a bulk order?
Ja. Free small-quantity samples are supplied for quality verification; you only cover the shipping cost, and that shipping cost is deducted from your first formal bulk order as a cooperation incentive.
Q10. What is your monthly capacity and typical lead time?
Monthly output across the MPO family is 150,000 stukken. Standard orders of several thousand pieces ship in 7–12 days from stock. Bulk orders above 20,000 pieces ship in 15–20 days. Custom packaging with full artwork runs from an MOQ of 30,000 stuks.
Q11. Can these MPO products be used outdoors?
The standard MPO line is optimised for data hall, MDA and rack environments (IP50, −20°C to +60°C, LSZH). For outdoor and FTTA applications, use the FTTA MPO/MTP Fiber Optic Patch Cord with an outdoor jacket, or ask for a custom outdoor build. Do not deploy the standard indoor jacket in unprotected outdoor conditions.
Q12. Wat is de garantie?
Standard warranty is 1 jaar; design service life is up to 10 jaar. Because 100% inspection is applied on every unit, field failures are rare; when they occur within the warranty period, we ship a replacement immediately.