The difference between LC Uniboot connector and Normal LC connetor
November 30, 2022
Showing all 5 results
The optical transceiver is widely used to connect network devices,
such as switches, NIC (network interface card), and media converters.
It makes SFP module necessary in fiber optical connections.
SFP module has been an industry workhorse for over 20 years.
Fibconet is committed to providing customers like you with the highest quality SFP modules.
| SFP Types | Transceiver Type | Connector | Distance | Data Rate |
|---|---|---|---|---|
| SFP Fiber Module | SX, MX, LX, EX, ZX, EZX, BX | LC Duplex | 100m-160km over MMF or SMF | 100Mbps/ 1000Mbps |
| CWDM/DWDM SFP | LC Duplex | 10km-120km over SMF | ||
| SFP Copper Module | 1000BASE-T | RJ45 | 100m over Copper Twist Pair Cable | 1000Mbps |
| 10/100BASE-T | RJ45 | 100m over Copper Twist Pair Cable | 100Mbps | |
| 10/100/1000BASE-T | RJ45 | 100m over Copper Twist Pair Cable | 1000Mbps |
● Fully compatible with Huawei, ZTE, H3C, Cisco, Riptide, HP and other switches on the market.
● According to customer requirements with decoding software and decoding board.
● 24 hours delivery for regular supply.
● Fast response, customer service 24 hours online for you
● Custom product labeling and packaging services
● 3-year warranty, 15 days no reason to return or exchange
Contact us and get the best price!
Fibconet guarantees that each product undergoes 13 testing procedures such as assembly, signal, compatibility, aging, and final inspection for quality assurance.
We can provide you with various types of patch cord products. Support customized services.
Aboslut Maximum Ratings
| Parameter | Symbol | Min. | Typical | Max. | Unit |
| Storage Temperature | TS | -40 | +85 | °C | |
| Case Operating Temperature | TA | 0 | 70 | °C | |
| Maximum Supply Voltage | Vcc | -0.5 | 4 | V | |
| Relative Humidity | RH | 0 | 85 | % |
Electrical Characteristics (TOP = 0 to 70 °C, VCC = 3.135 to 3.465 Volts)
| Parameter | Symbol | Min. | Typical | Max. | Unit | Note |
| Supply Voltage | Vcc | 3.135 | 3.465 | V | ||
| Supply Current | Icc | 500 | mA | |||
| Power Consumption | P | 1.8 | W | |||
| Transmitter Section: | ||||||
| Input differential impedance | Rin | 100 | Ω | 1 | ||
| Tx Input Single Ended DC Voltage Tolerance (Ref VeeT) | V | -0.3 | 4 | V | ||
| Differential input voltage swing | Vin,pp | 180 | 700 | mV | 2 | |
| Transmit Disable Voltage | VD | 2 | Vcc | V | 3 | |
| Transmit Enable Voltage | VEN | Vee | Vee+0.8 | V | ||
| Receiver Section: | ||||||
| Single Ended Output Voltage Tolerance | V | -0.3 | 4 | V | ||
| Rx Output Diff Voltage | Vo | 300 | 850 | mV | ||
| Rx Output Rise and Fall Time | Tr/Tf | 30 | ps | 4 | ||
| LOS Fault | VLOS fault | 2 | VccHOST | V | 5 | |
| LOS Normal | VLOS norm | Vee | Vee+0.8 | V | 5 | |
Optical Parameters(TOP = 0 to 70°C, VCC = 3.135 to 3.465 Volts)
| Parameter | Symbol | Min. | Typical | Max. | Unit | Note |
| Transmitter Section: | ||||||
| Center Wavelength | λc | λ-6.5 | λ+6.5 | nm | ||
| spectral width | △λ | 1 | nm | |||
| Average Optical Power | Pavg | -1 | +4 | dBm | 1 | |
| Laser Off Power | Poff | -30 | dBm | |||
| Extinction Ratio | ER | 8.2 | dB | |||
| Transmitter Dispersion Penalty | TDP | 3.2 | dB | 2 | ||
| Relative Intensity Noise | Rin | -128 | dB/Hz | 3 | ||
| Optical Return Loss Tolerance | 20 | dB | ||||
| Receiver Section: | ||||||
| Center Wavelength | λr | 1260 | 1620 | nm | ||
| Receiver Sensitivity (OMA) | Sen | -16 | dBm | 4 | ||
| Stressed Sensitivity (OMA) | SenST | -14 | dBm | 4 | ||
| Los Assert | LOSA | -27 | – | dBm | ||
| Los Dessert | LOSD | -17 | dBm | |||
| Los Hysteresis | LOSH | 0.5 | dB | |||
| Overload | Sat | 0 | dBm | 5 | ||
| Receiver Reflectance | Rrx | -12 | dB | |||
Different types of optoelectronic devices, the raw materials are not exactly the same, as follows:
TOSA: TO-CAN, ceramic cores, tube(Metal in general)
Classification of ceramic cores
Major chip manufacturers:
Japan: Mitsubishi, Sumitomo
USA: CY（CYoptics）, AOI
Taiwan: LuxNet, Truelight
ROSA: PIN-TIA 、tube(Plastic in general)
PIN-TIA chip manufacturers:
Domestic: Fiberhome, Mignal, Opto Sensor Tech
Abroad: NT(Nanotech), Oclaro, SEMTECH etc.
BOSA: TO-CAN, ceramic cores, tube and filters
Our SFP modules will give you a wide variety of Gigabit Ethernet connectivity options for data centers, enterprise wiring closets, and service provider transport applications.
① Surface and structure design for the products can be provided to meet a variety of demands.
② 3D sample can be offered before the mass production
③ Third-party service of full-process video audit and inspection of factory and products can be provided.
① How can we place an order?
After the agreement is made on the product parameters, we will make a proforma invoice for you to confirm.
As soon as advance payment (deposit) is received, we will arrange the production and delivery.
If you have your ship forwarder, we will use your ship forwarder to deliver goods;
While you don’t have a shipping forwarder, we can ship them by our agent shipping company which offers a competitive freight cost.
② What is the quality of your products?
All of our products are of high quality. We promise a 100% recall policy if products are unqualified, and we can write it into our contract.
③ How do you arrange the shipping?
Solution A: Fibconet takes care of everything.
Clients only need to collect cargo in a local port or wait for cargo delivery to their office.
There are two types of shipping methods available: by sea and by air
(Express courier – FedEx/ DHL/UPS/TNT/EMS. We can ship them according to your express account or ship them by our agent company. The delivery time is about four to seven days).
Solution B: Clients assign a Shenzhen logistic company to do the shipping,
Fibconet follows the shipping company’s instructions and finishes the delivery.
④ How can you guarantee the delivery time?
To avoid the delay, we have built a complete and professional procedure system from production to delivery.
We have rich experience in production and delivery.
We can regulate the penalty clause in the contract for the late delay.
⑤ What’s your best price for your passive fiber optic product?
Based on the quality and quantity of goods, we would quote the best matching price for you all the time.Please contact me if you want to get the latest price list.
Superior Fiber Optic Connectivity Solutions and Service
About Us
We will respond within 12 hours, please pay attention to the email with the suffix “@fibconet.com”.
Also, you can go to the Contact Page, which provides a more detailed form.