Search

1. Mini Type PLC Splitter

Fiber Optic Mini PLC Splitter Factory

1.What You Need to Know About Mini Splitter

The mini plc splitter is packaged with steel pipe, and the fiber outlet uses a 0.9mm loose tube. It is a PLC optical splitter with a connector plug and is used in scenarios with small installation space.

The design of mini PLC splitter is suitable for fiber optic closure installation, the material of seal packet is stainless steel.

Applications:

  • FTTX
  • Data centers
  • Wireless communication
  • Fiber optic sensors
  • Fiber optic testing

2.Pros of Mini Splitter compare to Other Type Splitters

mini plc splitter

Small Size: Mini PLC splitters are significantly smaller than other types of PLC splitters. As a result, they are ideal for applications where space is tight or desire a smaller footprint.

Save Your Cost: Mini PLC splitters are generally less expensive than other types of PLC splitters. Due to its Clean and simple design.

Wide Operating Temperature Range: Mini PLC splitters can operate over -40℃~+75℃.

High Reliability: Mini plc splitters are made of high-quality materials like silica glass and have a compact and rugged design that reduces the risk of damage from outside factors.

Low Insertion Loss: Mini PLC splitters have an insertion loss of 0.2dB, which means they hardly degrade signal quality. As a result, they are an excellent choice for high-speed data applications.

Easy Installation: Mini PLC splitters are simple to install and require little maintenance. Saving your time and money in the long run.

3.Main Raw Materials of Our Mini Splitter

These are our principle and basement to have a good reputation of quality in the FTTH area.
① Chip: The PLC splitter chip using a semiconductor process (lithography, etching, development, etc.).To provide high performance products, Our Chips generally use SHIJIA, OLKOPTO, South Korean wooriro.
② Fiber:Fiberhome,YOFC,HTGD etc.
③ Ferrule: CCTC (the world’s biggest supplier)
④ Glue: NTT from Japan

Raw Material

4. Specification and Structure

Table 1 – 1×N PLC Splitter

Parameters 1×2 1×4 1×8 1×16 1×32 1×64 1×128
Operating Wavelength (nm) 1260~1650
Fiber Type G652D or customer specified
Insertion Loss (dB) 3.8 7 10.2 11.5 16.8 20.5/21.0 24.2/24.5
Loss Uniformity (dB) 0.4 0.5 0.8 1 1.2 2 2.5
Return Loss (dB) 55 55 55 55 55 55/50 55/50
Polarization Dependent

Loss(dB)

0.2 0.2 0.2 0.2 0.2 0.35 0.35
Directivity (dB) 55 55 55 55 55 55 55
Wavelength Dependent

Loss(dB)

0.3 0.3 0.3 0.5 0.5 0.5 0.5
emperature Stability(-50~85℃(dB) 0.4 0.4 0.4 0.5 0.5 0.5 0.5
Operating Temperature ℃ -50~85
Storage Temperature ℃ -50~85

Table 2 – 2×N PLC Splitter

Parameters 2x2 2×4 2×8 2×16 2×32 2×64 2×128
Operating Wavelength
(nm)
1260~1650
Fiber Type G652D
Insertion Loss (dB) 4.2 7.5 10.6 11.9 17.2 20.8 23.8
Loss Uniformity (dB) 0.8 1 1.2 1.5 1.8 2 2
Return Loss (dB) 50 50 50 50 50 50 50
Polarization Dependent Loss(dB) 0.2 0.2 0.3 0.3 0.4 0.4 0.4
Directivity (dB) 55 55 55 55 55 55 55
Wavelength DependentLoss(dB) 0.6 0.6 0.6 0.8 1 1 1.2
Temperature Stability
(-50~ 85 ℃)(dB)
0.6 0.6 0.6 0.8 1 1 1
Operating Temperature(℃) -50~85
Storage Temperature(℃) -50~85

Notes:

1.Specified without connectors.
2. Add 0.15dB loss per connector.

Mini Type PLC Splitter structure

6.Quality Standard

mini plc splitter test
Low IL,High RL: We can reach 0.1 db utilizing patch cord. In general, 0.2dB is enough for the market.
High-low temperature cycle: Twice high-low temperature cycle test range -50°~85°.Suitble for all world market.
Dring room:Effectively extend the life of optical devices.

7. Package of Mini PLC Splitter

Single PE bag or blister box, 150-400 pieces/carton, size 43x42x33/61.5×51.5×25

Reference
eg package

Our Package way

8. Buying Tips of Mini Type PLC Splitter in Bulk

  1. What is the insertion loss you require?
  2. Do you need to print or label the steel pipe?
  3. What is your labeling requirement?
    (label on PE bag/blister box, outer carton label, technical parameters)
  4. Is the fiber color you need colored fiber or white fiber?
  5. What is your format requirement for technical parameters?

9.Our Factory Show

mini plc splitter

Fibconet offer third-party video factory inspection services to ensure you can get quality products,Be free to contact us for latest mini type plc splitter price.

mini plc splitter

Get A Quick Quote

We will respond within 12 hours, please pay attention to the email with the suffix “@fibconet.com”

Also, you can go to the Contact Page, which provides a more detailed form.