FSDB-16N-S Fiber Splitter distribution Box is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing and distribution can be done in this box, insertion module splitters can be mounted in it, and meanwhile, it provides solid protection and management for the FTTx network building.
It is also installed in 1 x 16 fiber splitter, which is smaller than other fiber distribution boxes, saves cost and can be used in more occasions
|1) Anti-UV (Ultraviolet).||1) FTTH access network|
|2) Fit the cable diameter ranged from 10mm to 13mm.||2) Telecommunication network|
|3) Fit cord cable/ patch cord / drop fiber output.||3) CATV networks|
|4) Easy to maintain and extend the capacity.||4) Data communications network|
|5) Fiber bend radius control more than 30mm.||5) Local area networks|
|Installation Method||Wall Mounted|
|Capacity Of Splicing||2*8 Cores|
|Splitter Type||Insertion module Type PLC|
|Capacity Splitter||2 Slot (1:8 2Pcs , 1:16 1PCS)|
|IP Grade||IP 65|
|Size: H×W×D (mm)||253×198×100 (MM)|
Drill 4 holes in the wall according to the installation size,
place the expansion bolt,
place the mounting plate to match up the holes, and use a bolt to fasten.
Fix the box and the mounting plate with screws from the inside of the box
Pole-mounted installation: Fix 1 set of the hose clamps to the telecom pole
Cable storage installation(optional function): Adjust the spacing of cable storage and use screws to secure the box to cable storage
We will respond within 12 hours, please pay attention to the email with the suffix “@fibconet.com”.
Also, you can go to the Contact Page, which provides a more detailed form.
Our sales experts will respond within 24 hours, please pay attention to the email with the suffix “@fibconet.com”.