ФИБЦОНЕТ производи оптичка влакна патцх каблови и пигтаилс across five product families — simplex & duplex indoor, waterproof drop, оклопно, MPO high-density, and ODF pigtails — with combined output exceeding 13 million cords per month. Every cord is 100% тестиран на губитак уметања, повратни губитак, tensile strength and end-face quality before packaging.
Our patch cords meet the corresponding test requirements defined in ИЕЦ 61300 (Класа У) и Телцордиа ГР-326-ЦОРЕ (Класа Р). Optical fiber comes from China’s four leading brands — YOFC, ЗТТ, Hengtong and Fiberhome. Ceramic ferrules use the CCTC series (Sumitomo ferrules available on request), and connector grades run from network-level to telecom-level to match your project’s cost and performance profile.
Beyond standard telecom cords, наше МПО / MTP high-density line supports 40G, 100Г, 400G and 800Г parallel optical transmission — the current mainstream for AI-driven data-centre buildouts and hyperscale MDA cabling. See the MPO section below.
| Сериес | Типична употреба | Кључне спецификације | Конектори |
|---|---|---|---|
| Indoor Simplex & Duplex Patch Cord | Data-centre patching, telecom room, cross-connect, in-cabinet routing | Insertion loss avg ≤ 0.3 дБ; затегнути 45 Н; 2.0 / 3.0 мм јакна; LSZH available | СЦ, ЛЦ, ФЦ, СТ, МУ, МТРЈ, E2000 — PC / УПЦ / АПЦ |
| Оутдоор & Waterproof Drop Patch Cord | ФТТХ пад, outdoor terminal box, CPRI fronthaul, base-station link | IP-rated seal; UV-resistant jacket; pre-connectorized options for 1–4 core drop | Мини СЦ, СЦ/АПЦ, LC/APC waterproof |
| Арморед & Anti-Rat Patch Cord | Data-centre under-floor, in-conduit runs, underground burial, оштре средине | 201 stainless-steel spiral armor; затегнути 140 Н (2× standard); слани спреј 24 хмерово; operating −40 to +85 °Ц | СЦ, ЛЦ, FC — UPC / АПЦ |
| МПО / MTP High-Density Cord ⭐ | Data-centre MDA, AI compute cluster fabric, 40G/100G/400G/800G parallel optics, high-density cabinet | До 72 fibers per MPO; single-mode IL down to 0.15 дБ; multimode low-loss ≤ 0.35 дБ; ≥ 500 циклуси парења | МПО / MTP male & женски; hybrid MPO–LC / MPO–SC / MPO–FC breakout |
| Indoor Pigtail | ODF splicing, distribution box terminals, fusion-splice on-site | 0.9 mm buffered pigtail; · Лако се монтира са механичким спојем и без полирања · Минимизирајте стопу кварова помоћу карактеристика уклањања и поновне употребе 1.5 m length; custom lengths supported | СЦ, ЛЦ, FC — UPC / АПЦ |
Every series above is 100% factory-tested (end-face, губитак уметања, повратни губитак, затегнути). Electronic test reports in FLUKE or EXFO format are available with each order.
| Патцх Цорд | Пигтаил | |
|---|---|---|
| Connectorization | Connectors on both ends | Connector on one end only; other end bare fiber for fusion splicing |
| Primary use | Equipment-to-equipment or equipment-to-panel | ОДФ / distribution-box termination, fusion-spliced to the incoming cable |
| Дужина | Типично 0.5 – 30 м; custom up to 300 м | Типично 1.0 – 1.5 м; custom on request |
| Инсталација | Plug-and-play | Requires fusion splicer on-site |
| Најбоље за | Data centre patching, МДА, cross-connect, PON drop | Central office, ODF panel splicing, distribution frames |
We manufacture patch cords with all mainstream connectors: ФЦ, СТ, СЦ, ЛЦ, МУ, МПО / МТП, Е2000, МТРЈ, СМА. End-face contact is available in three types:
For module ports, ЛЦ, SC and MPO / МТП dominate. LC is the default for high-density optical modules; SC is standard for FTTH; MPO handles high-count parallel links.
| Jacket type | Најбоље за | Напомене |
|---|---|---|
| Standard PVC | General indoor use | Lowest cost |
| Flame-Retardant PVC | Дата центри, plenums with local fire code | Meets basic flame ratings |
| ЛСЗХ (Лов Смоке Зеро Халоген) | Дата центри, telecom rooms, тунели, метроа | No halogens, low smoke, no corrosive gas — European & DC standard |
| LSZH Flame-Retardant | Strict fire-code data centres and public buildings | Combines LSZH with elevated flame retardance |
| 201 Stainless-Steel Armored | Оутдоор, сахрањен, rodent-prone, harsh environment | 140 Н затезна; 24 h salt-spray |
Сингле-цоре (симплек), дуал-језгро (дуплек), and multi-core cables in 4, 6, 8, 12, 24, 48 и 72 језгре конфигурације. Custom core counts and lengths supported on request. Standard patch cord lengths run 0.5–30 m; custom lengths up to 300 m for special projects. Standard pigtail length is 1.0 – 1.5 м.
МПО / MTP is the connector platform driving the next decade of data-centre and AI cabling. A single MPO connector carries 8, 12, 16, 24, све до 72 влакна, replacing dozens of individual patch cords with one plug. Our dedicated MPO production runs 150,000 cords per month са 100% ferrule interferometer inspection and per-core polarity verification.
| Link Speed | Fiber Count Required | Тип влакна | Реацх |
|---|---|---|---|
| 40G SR4 | 8 влакна (4Тк + 4Рк) | ОМ3 / ОМ4 | До 550 м (ОМ4) |
| 100G SR4 / SR10 | 8 или 20 влакна | ОМ3 / ОМ4 / ОМ5 | До 550 м |
| 400Г СР8 / ДР4 | 16 влакна / 8 влакна | ОМ4 / ОМ5 / сингле-моде | До 100 м (СР8) / 500 м (ДР4) |
| 800Г СР8 | 16 влакна | ОМ4 / ОМ5 | До 100 m — today’s AI cluster mainstream |
When you place an order, please confirm polarity type, gender configuration, connector-color scheme, and core-count breakout — our sales team will validate against your target optical modules before production begins.
| Параметар | Валуе |
|---|---|
| Тест стандард | ИЕЦ 61300 (Класа У); Телцордиа ГР-326-ЦОРЕ (Класа Р) |
| Губитак уметања (типично) | Standard ≤ 0.3 дБ; low-loss grade ≤ 0.15 дБ (MPO single-mode) |
| Повратни губитак | УПЦ ≥ 50 дБ; АПЦ ≥ 55 дБ |
| Радна температура | −20 до +60 °Ц (· Лако се монтира са механичким спојем и без полирања · Минимизирајте стопу кварова помоћу карактеристика уклањања и поновне употребе); −40 до +85 °Ц (оклопно & branch series) |
| Температура складиштења | −40 до +85 °Ц |
| Трајност парења | СЦ / ЛЦ / ФЦ ≥ 1,000 циклуса; МПО ≥ 500 циклуса |
| Затезна чврстоћа | Стандард 45 Н; грана 40 Н (дугорочне); оклопно 140 Н |
| Минимални радијус савијања | Standard cord 10 мм; MPO branch 15 mm static / 30 mm dynamic; armored 35–40 mm |
| Гаранција | 1-године фабричка гаранција; design service life 10 године |
| Сериес | Monthly Output |
|---|---|
| Simplex patch cord | 10,000,000 cords |
| Duplex patch cord (top-3 producer nationally) | 3,000,000 cords |
| МПО / MTP series | 150,000 cords |
| Breakout patch cord | 90,000 cords |
Optical fiber sourced from China’s four leading brands — ИОФЦ, ЗТТ, Hengtong and Fiberhome — the same feedstock trusted by tier-1 operators worldwide. Ceramic ferrules are Sanhuan series by default, са Sumitomo ferrules available on request for the tightest concentricity requirements. Jacket compounds come from Shanghai Kaibo, a stable supplier to the same four fiber manufacturers.
Insertion-loss variation between production batches is held within ±0,08 дБ. Colour consistency for OEM orders is managed by keeping a first-piece reference sample from every batch for direct comparison on subsequent orders.
Применљивост сертификације варира у зависности од линије производа и одредишног тржишта. Please confirm target market and required standards when requesting a quotation.
Standard simplex and duplex patch cords have но МОК — sample and trial orders are welcome. MPO cords typically start at 100 јединице. Armored cords have a 1,000-piece MOQ due to armor tooling setup; delivery within 10 дана. OEM-printed packaging requires 5,000 pieces minimum.
Regular configurations of simplex, duplex and standard MPO ship from stock within days — we keep 2,000–3,000 pieces of common SKUs like SC/UPC duplex 2.0 mm LSZH in-stock. MPO custom orders: 7–12 days for a few thousand pieces; 15–20 days for orders above 20,000 комада. Branch patch cords: samples ready in 3 дана.
да. Every cord ships with 100% factory testing (ТХЕ, РЛ, end-face, затегнути). Електронски извештаји о испитивању у ФЛУКЕ или ЕКСФО формат are available after order placement. 3D end-face inspection is standard on all MPO production and available on request for other cord types.
Standard-grade MPO: insertion loss ≤ 0.7 дБ (мултимоде 850 / 1310 нм). Low-loss grade: ≤ 0.35 дБ просек. Single-mode MPO with high-precision imported ferrules can reach IL as low as 0.15 дБ for testing and telecom-grade applications. Standard grade covers enterprise networks and office cabling; low-loss grade is designed for high-density cabinet cabling and 100G+ mainstream links.
да. Standard MPO breakout defaults: 12-core → 6 duplex LC; 24-core → 12 duplex LC. Custom splits including 2×12, 3×8, 4×6 and other ratios are fully supported. MPO–MPO breakout allows up to 6 MPO connectors on a single end, with both ends symmetric. Trunk length range: 0.2 м то 300 м; branch length differences within a single cable should stay within 30 cm to avoid fiber-stress attenuation drift.
Our MPO cords stably support 40Г, 100Г, 400Г и 800Г parallel optical transmission. This makes them suitable for current AI data-centre cluster fabric, hyperscale MDA cabling, and next-generation coherent transport buildouts. ОМ4 / OM5 multimode is the current mainstream for 400G / 800G SR8 links; single-mode covers longer reach and DR4 architectures.
да. Our patch cords meet the applicable UL, ETL and TUV test standards. Formal third-party certification can be arranged per project on request — test cost is quoted separately depending on the scope required.
Optical fiber from ИОФЦ, ЗТТ, Hengtong and Fiberhome. Ceramic ferrules are Sanhuan by default; Сумитомо ferrules available on request. Connector grades range from network-level (mainstream cost-performance) to telecom-level (highest concentricity, lowest IL) — specify per project.
Our armored patch cords use a 201 stainless-steel spiral armor layer. Затезна чврстоћа достиже 140 Н (versus 70 N for standard cords) and the armor passes a 24-hour salt-spray test, making them suitable for marine shipping and coastal deployments. Best for static routing with occasional bending — not recommended for high-frequency repeated flexing. For buried installations, an additional protective conduit is recommended to prevent long-term corrosion.
да. We produce to your artwork — custom colour boxes, лого спољног картона, private-label PE bags, spec-sheet inserts and branded manuals. Neutral packaging is available with no minimum quantity. Printed packaging with custom logo requires 5,000 pieces minimum to justify plate setup.
Одговорићемо унутар 12 сати, обратите пажњу на имејл са суфиксом “@фибцонет.цом”.
Такође, можете отићи до Контакт страница, који пружа детаљнији облик.
