Fibconet fabrike 12 series of outdoor fiber optic splice closures (also called joint closures, cable closures, or in field slang dome cans) for OSP splicing between feeder, distribution and drop cables. Capacity ranges from 12 cores for FTTH drop junctions up to 840 cores for backbone and long-haul splice points. Sealed to IP68, housings are PP+GF, PPR or metal-braced polymer with a 15 to 25-year design field life. Our passive optical component roots trace back to 1994, and the same in-house tooling and test discipline built for PLC splitters now runs the splice closure line.
Two body types cover the two OSP install methods: dome (vertical) closures for pole, wall and direct-buried joints, Yon tipik APON/BPON bay orizontal (inline) closures for manhole, handhole and figure-8 aerial splice points. Selected dome models ship pre-loaded with 1×8 or 1×16 PLC splitters and act as PON hub points inside a Quick ODN / pre-terminated FTTH deployment. Enclosures accept mechanical, heat-shrink or silicone sealing per model.
The sections below list the 12 models grouped by body type, then cover Dome-vs-Horizontal selection logic, espesifikasyon teknik, kapasite fabrikasyon, anbalaj, FAQ, ak yon kanal sitasyon.
Cylindrical body with a single base plate carrying all cable ports. Best suited to pole-mount, wall-mount and direct-buried joints where cables enter from one end. The two splitter-loaded models below double as PON hub points inside a Quick ODN deployment.
| Modèl | Core Capacity | Fermeture / Rating | PON hub role | Itilizasyon tipik |
|---|---|---|---|---|
| Ik10 ip68 96 Core Huawei-Compatible Access Terminal Closure | 96 nwayo | IP68 / IK10 impact | — | Huawei-standard access node, pole or wall |
| 96/144 Core Dome Closure (Pol / Mi / Souteren) | 96–144 cores | IP68 | — | Multi-scenario OSP splice, nenpòt mòn |
| 96/144 Nwayo 100 kPa 25-ane Fèmen episur | 96–144 cores | IP68 / 100 kPa kenbe presyon lè a | — | Long lavi zo rèl do jwenti ki mande tès presyon |
| 144 Nwayo Metal-Bracket IP68 Dome Fèmen | 144 nwayo | IP68 | — | Plato metal-braced pou gwo-Vibration oswa chaj kab lou |
| IP68 288 Nwayo High-kapasite Dome Fèmen | 288 nwayo | IP68 | — | Pwen épissure zo rèl do wo dansite |
| 1:8 / 1:16 PLC Splitter IP68 Dome (22000 N / 10 cm retansyon kab) | Splitter-chaje bòl | IP68 / 22000 N kab rale | Wi — Quick ODN mwaye | PON mwaye konbine épissure ak 1 × 8 oswa 1 × 16 divize |
| IP68 1:8 PLC Splitter Pre-termine Grès Fèmen | Splitter + FAT pò | IP68 | Wi - pre-termine mwaye PON | Ploge-and-play mwaye PON ak pò gout-kab |
Kò long ak pò kab nan tou de bout. Prefere pou twou egou, ponyen, ayeryen figi-8 span ak nenpòt pwen épissure kote kab antre ak sòti nan menm aks la.
| Modèl | Core Capacity | Fermeture / Rating | Itilizasyon tipik |
|---|---|---|---|
| Pp+gf / PPR IN-LINE 2-an-2-soti 12 Nwayo Fèmti Fèmti | 12 nwayo | IP68 / sele mekanik | FTTH gout junction, ayeryen oswa po |
| 48 Core 1-in-2-out Inline Cable Closure | 48 nwayo | IP68 | Small branch inline splice |
| 15+ Service Years PP+GF IP68 2-in-2-out Inline Closure | Jiska 96 nwayo | IP68 / 15+ years field life | Mid-density distribution splice with long life claim |
| 96 Core Silicone-Protection Horizontal Splice Closure (Customized) | 96 nwayo | IP68 / silicone sealing | Manhole splice with elevated moisture and chemical exposure |
| 576 / 840 Core Heat-Shrink Seal IP68 Cable Closure | 576–840 cores | IP68 / heat-shrink | Long-haul backbone splice, high-count ribbon or loose-tube |
A splice closure protects, seals and organises spliced fibers at any point along an OSP cable route. The body shape follows the physical install location, not the fiber count.
| Dome (Vertical) | Horizontal (Inline) | |
|---|---|---|
| Antre kab | All ports on one base plate | Ports at two opposite ends |
| Best install | Pol, miray, dirèk-antere, hand-hole from top | Manhole, figi ayeryen-8 span, plato-monte inline |
| Konte nwayo tipik | 96, 144, 288 - dilatabl atravè plato ajoute | 12, 48, 96, 576, 840 - echèl ak longè kò |
| Aksè | Leve bòl la, tout plato épissure ekspoze | Fann koki a, aksè plato sou aks la |
| PLC splitter chaje | Komen (PON hub role) | Mwens komen, itilize sitou pou épissure pi |
| Core capacity | Network role | Body type shortlist |
|---|---|---|
| 12–48 cores | FTTH gout / distribution junction | Inline, sele mekanik |
| 96 nwayo | Access-layer PON node, base-station splice | Dome (Huawei-compatible or metal-bracket) |
| 144 nwayo | Distribution-layer aggregation | Dome, tray-expandable |
| 288 nwayo | Metro backbone splice point | Dome, gwo kapasite |
| 576–840 cores | Lontan kolòn vètebral, high-count ribbon | Inline, heat-shrink seal |
Remak: the values below are family-typical ranges across the 12 series, pa yon sèl-SKU datasheet. Ask us for the model-specific test report at RFQ stage; nou voye li anba nimewo pati modèl la.
| Paramèt | Valè tipik | Kòmantè |
|---|---|---|
| Core capacity | 12 pou 840 nwayo | Pou chak modèl; expandable via added splice trays |
| Materyèl lojman | Pp+gf, PPR, ABS+PC or metal-braced polymer | Selected per model and environment |
| Klas sele | IP68 | All outdoor OSP models |
| Impact resistance | Up to IK10 on selected models | Metal-bracket and IK10-rated series |
| Metòd sele | Mekanik / heat-shrink / silicone | Pou chak modèl |
| Air-pressure hold | 100 kPa on selected models | For pressurised OSP networks |
| Retansyon kab (axial pull) | Jiska 22,000 N / 10 cm on selected models | Splitter-loaded dome rated for heavy pull |
| Cable entry ports | 1-antre-2-soti, 2-antre-2-soti, 4-in-4-out per model | Additional ports available on custom builds |
| Main cable diameter | Typically Φ7–Φ16 mm | Model-dependent; branch cable Φ5–Φ11.5 mm |
| Plato épissure | Stackable, 12 oswa 24 splices per tray | Both fusion and mechanical splice trays supported |
| Tanperati opere | −40°C to +65°C | Storage −35°C to +55°C per shipping spec |
| Design field life | 15 pou 25 years outdoor | Pou chak modèl; PP+GF with UV additive supports 25 ane |
| Reference test standards | IEC 61753-1, Yd/t 814, GR-771 | Applied per project requirement |
Fibconet’s optical communication background traces back to the early 1990s. Our passive optical component manufacturing roots start in 1994 with a PLC splitter factory; the company was formally structured in 2000 and today operates with 300+ core staff and an extended multi-site manufacturing network of up to 800 anplwaye ak enjenyè across China. The same tooling and test discipline built for high-count PLC splitter production now runs the splice closure line, including injection molding of PP+GF and PPR housings, splice tray forming, and full-load assembly.
Splice closures are only as reliable as the materials inside them. We control the upstream stack rather than only the assembly step:
Fibconet operates under an integrated ISO 9001 / ISO 14001 / ISO 45001 management system covering quality, environment and occupational health & sekirite. Raw material RoHS reports are supplied by default with every shipment.
Product-level compliance is issued per model and per target market. Depending on the model list and destination country, we can support SA, RoHS, REACH, la, Etl, CPR, ANATEL, CCA, TLC and other market-entry documents. Applicable test reports against IEC 61753-1, Yd/t 814 Yon tipik APON/BPON bay Telcordia GR-771 reference standards are provided at project scale.
Certification applicability varies by product and project requirements. Send us your target market and the model list, epi nou retounen sètifika aplikab ki mete ak sitasyon an.
All four are the same product family — an outdoor enclosure that houses and seals spliced fibers along an OSP cable route. “Splice closure” Yon tipik APON/BPON bay “joint closure” are the standard English terms. “Dome can” Yon tipik APON/BPON bay “炮筒” are field slang for the dome (vertical) body style. The Chinese term “熔接包” refers to the same category and is common in Chinese-language RFQs from Southeast Asia and Africa.
A splice closure protects and organises spliced fibers along an OSP cable route; there is no active drop-cable termination for subscribers. A distribution box (GRIS) terminates drop cables into adapter ports and often houses the last-mile splitter. Splice closures sit deeper in the network; distribution boxes sit at the drop point closest to homes.
Choose dome when cables enter from a single direction — pole-mount, miray-mòn, dirèk-antere, or hand-hole accessed from above. Choose inline when cables enter and exit along the same axis — manhole splice, figi ayeryen-8 span, or tray-mount along a linear run.
Match the closure to the largest cable at the splice point plus a spare tray for future expansion. FTTH drop junctions typically use 12–48 core inline closures. PON access nodes use 96–144 core dome closures. Metro backbone splices use 288 nwayo; long-haul trunk splices use 576 oswa 840 cores in heat-shrink inline bodies.
For direct-buried and pressurised networks, use a mechanical-seal dome with 100 kPa kenbe presyon lè a; the seal is verifiable in the field and re-enterable for future splice work. Heat-shrink is more permanent but not re-enterable without cutting.
Wi. Dome closures can be shipped with a 1×8 or 1×16 PLC splitter pre-terminated at factory. La 1:8 / 1:16 PLC Splitter Dome model is rated for 22,000 N / 10 cm cable retention so the housing tolerates heavy drop-cable pull. Splitter chips are Shijia or Korean-source, and pigtails use G.657.A2 fiber from major Chinese fiber brands.
PP+GF and PC+ABS housings with a UV stabiliser additive package hold 15 pou 25 years of outdoor service, depending on model. Ask us for the specific model’s material spec if your project tender requires a stated design life.
Wi. IEC 61753-1, Yd/t 814 and GR-771 test reports are available per model. Raw material RoHS reports ship by default. Market-entry certificates such as CE, REACH, la, Etl, CPR, ANATEL, CCA and TLC are issued per model and per target market. If a certificate you need is not already on file, we can arrange third-party testing at project scale.
MOQ starts at 100 pcs on standard configuration; custom builds are typically 500–1,000 pcs. Standard orders ship in 15–25 days; custom builds in 25–40 days. [TBC: confirm exact values per model at RFQ stage.]
Wi. Pole-mount and wall-mount hardware is included on the dome closures. Aerial figure-8 mounting kits for inline closures are supplied on request. Manhole tray mounts and cable-management brackets are quoted with the closure.
Wi. Our splitter-loaded dome closures — the 1:8 / 1:16 PLC Splitter Dome and the pre-terminated FAT closure — act as PON hub points inside a Quick ODN system. They pair with our pre-terminated drop cables, MPO sant, sub boxes and asymmetric splitters to reduce on-site splicing, cut installation labor, and make FTTH rollout more predictable. If your project is a new FTTH build in a labor-cost-sensitive market, ask for a matched Quick ODN configuration when you send the RFQ.
G rezo achitekti konsepsyon fibconet Fibre optik splitter bwat 12 G rezo achitekti konsepsyon fibconet Fibre optik splitter bwat, G rezo achitekti konsepsyon fibconet Fibre optik splitter bwat "@fibconet.com".
Epitou, ou ka ale nan Kontakte Paj, ki bay yon fòm pi detaye.
