Fiber Optic Splice Closure Manufacturer — Dome and Inline, 12 に 840 コア

フィブコネットのメーカー 12 series of outdoor fiber optic splice closures (also called joint closures, cable closures, or in field slang dome cans) for OSP splicing between feeder, distribution and drop cables. Capacity ranges from 12 cores for FTTH drop junctions up to 840 cores for backbone and long-haul splice points. Sealed to IP68, housings are PP+GF, PPR or metal-braced polymer with a 15 to 25-year design field life. Our passive optical component roots trace back to 1994, and the same in-house tooling and test discipline built for PLC splitters now runs the splice closure line.

Two body types cover the two OSP install methods: dome (vertical) closures for pole, wall and direct-buried joints, と 水平 (inline) closures for manhole, handhole and figure-8 aerial splice points. Selected dome models ship pre-loaded with 1×8 or 1×16 PLC splitters and act as PON hub points inside a Quick ODN / pre-terminated FTTH deployment. Enclosures accept mechanical, heat-shrink or silicone sealing per model.

以下のセクションでは、 12 models grouped by body type, then cover Dome-vs-Horizontal selection logic, 技術仕様, 製造能力, 梱包, よくある質問, そして引用チャネル.

12 Splice Closure Models We Manufacture

グループ 1 — Dome (Vertical) Splice Closures

Cylindrical body with a single base plate carrying all cable ports. Best suited to pole-mount, wall-mount and direct-buried joints where cables enter from one end. The two splitter-loaded models below double as PON hub points inside a Quick ODN deployment.

グループ 2 — Horizontal (Inline) Splice Closures

Elongated body with cable ports at both ends. Preferred for manhole, handhole, aerial figure-8 span and any splice point where cables enter and exit in the same axis.

What Is a Splice Closure and How to Choose the Right Type

Dome vs Horizontal — The Two Body Types

A splice closure protects, seals and organises spliced fibers at any point along an OSP cable route. The body shape follows the physical install location, not the fiber count.

Sealing Method — Mechanical, Heat-Shrink or Silicone

• メカニカルシール (compression grommet + rubber gasket): re-enterable, no torch required, fastest field install. Standard on most dome and small inline models.
• Heat-shrink seal: highest holding force, permanent seal, common on high-count 576–840 core inline backbone closures. Requires a torch and trained crew.
• Silicone / gel seal: used where the splice point sees standing moisture, oil or aggressive chemicals; re-enterable without heat.

How to Match the Closure to Your Field Scenario

• FTTH drop junction on aerial figure-8 → 12-core inline mechanical seal.
• PON hub with 1×8 or 1×16 splitter → splitter-loaded dome closure with pre-terminated ports; slots into a Quick ODN deployment.
• Direct-buried backbone splice needing pressure test → 96/144 core dome, 100 kPa air-pressure hold, 25-年設計寿命.
• Manhole splice with wet environment → horizontal closure with silicone sealing.
• Long-haul or metro trunk splice, high fiber count → 576 また 840 core inline heat-shrink closure.
• Pole splice with heavy tray load or vibration → metal-bracket dome, tray-secured for mechanical stability.

Fiber Count Selection Guide

技術仕様

ノート: the values below are family-typical ranges across the 12 シリーズ, 単一 SKU データシートではない. RFQ段階でモデル固有のテストレポートをリクエストしてください; モデルの部品番号でお送りします.

製造能力と品質管理

Production History and Team

Fibconet’s optical communication background traces back to the early 1990s. Our passive optical component manufacturing roots start in 1994 with a PLC splitter factory; the company was formally structured in 2000 and today operates with 300+ core staff and an extended multi-site manufacturing network of up to 800 スタッフとエンジニア across China. The same tooling and test discipline built for high-count PLC splitter production now runs the splice closure line, including injection molding of PP+GF and PPR housings, splice tray forming, and full-load assembly.

上流の材料管理

Splice closures are only as reliable as the materials inside them. 組み立てステップだけではなく、上流のスタックを制御します:

• Housing resin: qualified PP+GF and PPR grades with a UV stabiliser and weathering-modifier additive package dosed at pre-mix.
• Sealing rubber and silicone: qualified grades matched to the operating temperature range and rated field life.
• Splice trays and metal brackets: produced on dedicated tooling for dimensional consistency across production batches.
• Passive optical parts inside splitter-loaded closures: 石家 / Korean-source PLC chips, NTT-grade optical epoxy, CCTC ceramic ferrules, and G.657.A2 pigtail fiber sourced from major Chinese fiber brands (ファイバーホーム, YOFC, 恒通).

品質管理

• Air-pressure hold test on every assembled dome closure before shipment (100 kPa on rated models).
• Waterproof and dustproof test to the rated IP68 grade on production samples per batch.
• 衝撃試験 per rated IK grade on housing samples.
• Cable retention pull test per rated axial load (まで 22,000 N / 10 cm on splitter-loaded dome).
• 熱サイクルおよび湿度試験 per model qualification.
• Full-load tray test with splice trays and splitters fitted, to verify cable-management fit under real port load.

認証とコンプライアンス

Fibconet operates under an integrated ISO 9001 / ISO 14001 / ISO 45001 management system covering quality, environment and occupational health & 安全性. 原材料の RoHS レポートは出荷ごとにデフォルトで提供されます.

Product-level compliance is issued per model and per target market. Depending on the model list and destination country, we can support これ, RoHS, 到着, the, ETL, 心肺蘇生法, ANATEL, CCA, TLC and other market-entry documents. Applicable test reports against IEC 61753-1, YD/T 814 と Telcordia GR-771 reference standards are provided at project scale.

Certification applicability varies by product and project requirements. ターゲット市場とモデルリストをお送りください。, and we return the applicable certificate set with the quotation.

包装, OEM およびカスタム オプション

標準的な輸出梱包

• Accessory bags (スプライストレイ, grommets, tools) inside moisture-proof plastic pouches.
• Individual moisture-proof and shock-proof inner box per closure.
• Master export carton marked with moisture-proof and orientation labels.
• Transport temperature range: −35°C to +55°C.
• Storage temperature range: −5°C to +45°C, relative humidity below 75%.

OEM およびカスタム オプション

• OEM ロゴとラベル: ハウジングにレーザーマーキング, printed on inner and master carton.
• カスタムポートレイアウト: extra cable entries or blanks per your project drawing.
• Splitter pre-loading: 1×8, 1×16 or custom ratio installed at factory for Quick ODN and PON hub roles.
• Splice tray count: pre-loaded with the exact tray count and adapter set your project requires.
• Mounting kit: ポール, 壁, aerial-figure-8 or manhole kit bundled per order.
• CAD drawings and installation manuals supplied on request for project design review.
• MOQ: 100 pcs per model on standard configuration; 500–1,000 pcs on custom builds. [TBC: confirm per model]
• Lead time: 15–25 days for standard orders; 25–40 days for custom builds. [TBC: confirm]

よくある質問

Q1. What do buyers mean by “スプライスクロージャー”, “joint closure”, “dome can” また “熔接包”?

All four are the same product family — an outdoor enclosure that houses and seals spliced fibers along an OSP cable route. “Splice closure” と “joint closure” are the standard English terms. “Dome can” と “炮筒” are field slang for the dome (vertical) body style. The Chinese term “熔接包” refers to the same category and is common in Chinese-language RFQs from Southeast Asia and Africa.

第2四半期. What is the difference between a splice closure and a distribution box?

A splice closure protects and organises spliced fibers along an OSP cable route; there is no active drop-cable termination for subscribers. A distribution box (太い) terminates drop cables into adapter ports and often houses the last-mile splitter. Splice closures sit deeper in the network; distribution boxes sit at the drop point closest to homes.

Q3. When should I choose a dome closure and when an inline closure?

Choose dome when cables enter from a single direction — pole-mount, 壁掛け, 直接埋設, or hand-hole accessed from above. Choose inline when cables enter and exit along the same axis — manhole splice, aerial figure-8 span, or tray-mount along a linear run.

Q4. What core capacity do I need?

Match the closure to the largest cable at the splice point plus a spare tray for future expansion. FTTH drop junctions typically use 12–48 core inline closures. PON access nodes use 96–144 core dome closures. Metro backbone splices use 288 コア; long-haul trunk splices use 576 また 840 cores in heat-shrink inline bodies.

Q5. What sealing method is most reliable for a direct-buried joint?

For direct-buried and pressurised networks, use a mechanical-seal dome with 100 kPa air-pressure hold; the seal is verifiable in the field and re-enterable for future splice work. Heat-shrink is more permanent but not re-enterable without cutting.

Q6. Do you supply closures pre-loaded with a PLC splitter?

はい. Dome closures can be shipped with a 1×8 or 1×16 PLC splitter pre-terminated at factory. ザ 1:8 / 1:16 PLC Splitter Dome model is rated for 22,000 N / 10 cm cable retention so the housing tolerates heavy drop-cable pull. Splitter chips are Shijia or Korean-source, and pigtails use G.657.A2 fiber from major Chinese fiber brands.

Q7. What is the outdoor field life?

PP+GF and PC+ABS housings with a UV stabiliser additive package hold 15 に 25 years of outdoor service, depending on model. Ask us for the specific model’s material spec if your project tender requires a stated design life.

Q8. Do you provide test reports and international standard conformity documents?

はい. IEC 61753-1, YD/T 814 and GR-771 test reports are available per model. Raw material RoHS reports ship by default. Market-entry certificates such as CE, 到着, the, ETL, 心肺蘇生法, ANATEL, CCA and TLC are issued per model and per target market. If a certificate you need is not already on file, プロジェクト規模でサードパーティのテストを手配できます.

Q9. What is your MOQ and typical lead time?

MOQ starts at 100 pcs on standard configuration; custom builds are typically 500–1,000 pcs. Standard orders ship in 15–25 days; custom builds in 25–40 days. [TBC: confirm exact values per model at RFQ stage.]

Q10. Do you supply mounting hardware for pole and manhole install?

はい. Pole-mount and wall-mount hardware is included on the dome closures. Aerial figure-8 mounting kits for inline closures are supplied on request. Manhole tray mounts and cable-management brackets are quoted with the closure.

Q11. Can these splice closures be used in a Quick ODN or pre-terminated FTTH deployment?

はい. Our splitter-loaded dome closures — the 1:8 / 1:16 PLC Splitter Dome and the pre-terminated FAT closure — act as PON hub points inside a Quick ODN system. They pair with our pre-terminated drop cables, MPOハブ, sub boxes and asymmetric splitters to reduce on-site splicing, cut installation labor, and make FTTH rollout more predictable. If your project is a new FTTH build in a labor-cost-sensitive market, ask for a matched Quick ODN configuration when you send the RFQ.