PLC Splitter Kab Workshop
Kabeh tata cara nglereni nganggo nglereni otomatis, kanthi kurang kesalahan lan efisiensi sing luwih dhuwur. Sawise langkah pemotongan, we will strip the fiber and move to next process.
Grinding njupuk babagan 15 menit, banjur polishing, babagan 12-15 menit. Sawise polishing, gunakake detektor perbesaran 200-fold kanggo mriksa apa pasuryan mburi lancar, yen ora, kudu nggiling bali.
Kopling minangka inti lan langkah utama produksi PLC, which needs to be completed in high-level dust-free workshop, lan syarat teknis kanggo operator utamane dhuwur.
During whole production process, ana telung tahapan ngruwat UV. Sing pisanan njupuk 120 detik kanggo garing lem epoksi nganggo sinar ultraviolet. Kapindho, 30 minutes.Third, 30 minutes.After repeated uv curing, ensure that the glue is completely dry.
During whole production process, there are two stages of high temperature baking. Each high temperature bake at 85°C for 8 pamisah serat pasif. Ensure that the fiber optic array can maintain the normal operation of the product in high temperature environment.
As the high-low temperature cycle, we put the optical fiber into the environment of -40°C~85°C for the experiment, and it takes 4 hours from the lowest temperature to the highest temperature. Our whole test lasts for 12 hours in total. During the production process, we conduct two cycles of high and low temperature test.
Testing Equipment
Kalibrator inti
3D Tes
Priksa Pasuryan Priksa
THE&Tes RL
Sambungake Sampel Gratis Sampeyan!