FIBCONET फायबर ऑप्टिक तयार करते पॅच कॉर्ड आणि pigtails across five product families — simplex & duplex indoor, waterproof drop, बख्तरबंद, MPO high-density, and ODF pigtails — with combined output exceeding 13 million cords per month. Every cord is 100% अंतर्भूत नुकसानासाठी चाचणी केली, परतावा तोटा, tensile strength and end-face quality before packaging.
Our patch cords meet the corresponding test requirements defined in IEC 61300 (वर्ग U) आणि Telcordia GR-326-CORE (वर्ग आर). Optical fiber comes from China’s four leading brands — YOFC, ZTT, Hengtong आणि Fiberhome. Ceramic ferrules use the CCTC series (Sumitomo ferrules available on request), and connector grades run from network-level to telecom-level to match your project’s cost and performance profile.
Beyond standard telecom cords, आमचे एमपीओ / MTP high-density line supports 40G, 100जी, 400G and 800जी parallel optical transmission — the current mainstream for AI-driven data-centre buildouts and hyperscale MDA cabling. See the MPO section below.
| मालिका | ठराविक वापर | की चष्मा | कनेक्टर्स |
|---|---|---|---|
| Indoor Simplex & Duplex Patch Cord | Data-centre patching, telecom room, cross-connect, in-cabinet routing | Insertion loss avg ≤ 0.3 dB; tensile 45 एन; 2.0 / 3.0 मिमी जाकीट; LSZH available | अनुसूचित जाती, एल.सी, एफसी, एस.टी, म्यू, MTRJ, E2000 — PC / UPC / APC |
| घराबाहेर & Waterproof Drop Patch Cord | FTTH drop, outdoor terminal box, CPRI fronthaul, base-station link | IP-rated seal; UV-resistant jacket; pre-connectorized options for 1–4 core drop | मिनी एससी, SC/APC, LC/APC waterproof |
| Armored & Anti-Rat Patch Cord | Data-centre under-floor, in-conduit runs, underground burial, कठोर वातावरण | 201 stainless-steel spiral armor; tensile 140 एन (2× standard); मीठ-स्प्रे 24 h; operating −40 to +85 °C | अनुसूचित जाती, एल.सी, FC — UPC / APC |
| एमपीओ / MTP High-Density Cord ⭐ | Data-centre MDA, AI compute cluster fabric, 40G/100G/400G/800G parallel optics, high-density cabinet | पर्यंत 72 fibers per MPO; single-mode IL down to 0.15 dB; multimode low-loss ≤ 0.35 dB; ≥ 500 वीण चक्र | एमपीओ / MTP male & स्त्री; hybrid MPO–LC / MPO–SC / MPO–FC breakout |
| Indoor Pigtail | ODF splicing, distribution box terminals, fusion-splice on-site | 0.9 mm buffered pigtail; सर्व ऑप्टिकल आणि यांत्रिक निर्देशांक पॅच कॉर्डला भेटतात 1.5 m length; custom lengths supported | अनुसूचित जाती, एल.सी, FC — UPC / APC |
Every series above is 100% factory-tested (end-face, अंतर्भूत नुकसान, परतावा तोटा, tensile). Electronic test reports in FLUKE or EXFO format are available with each order.
| पॅच कॉर्ड | पिगटेल | |
|---|---|---|
| Connectorization | Connectors on both ends | Connector on one end only; other end bare fiber for fusion splicing |
| Primary use | Equipment-to-equipment or equipment-to-panel | ODF / distribution-box termination, fusion-spliced to the incoming cable |
| लांबी | सामान्यतः 0.5 - 30 मी; custom up to 300 मी | सामान्यतः 1.0 - 1.5 मी; custom on request |
| स्थापना | Plug-and-play | Requires fusion splicer on-site |
| Best for | Data centre patching, MDA, cross-connect, PON drop | Central office, ODF panel splicing, distribution frames |
We manufacture patch cords with all mainstream connectors: एफसी, एस.टी, अनुसूचित जाती, एल.सी, म्यू, एमपीओ / MTP, E2000, MTRJ, SMA. End-face contact is available in three types:
For module ports, एल.सी, SC and MPO / MTP dominate. LC is the default for high-density optical modules; SC is standard for FTTH; MPO handles high-count parallel links.
| Jacket type | Best for | नोट्स |
|---|---|---|
| Standard PVC | General indoor use | Lowest cost |
| Flame-Retardant PVC | डेटा केंद्रे, plenums with local fire code | Meets basic flame ratings |
| LSZH (कमी धूर शून्य हॅलोजन) | डेटा केंद्रे, telecom rooms, बोगदे, subways | No halogens, low smoke, no corrosive gas — European & DC standard |
| LSZH Flame-Retardant | Strict fire-code data centres and public buildings | Combines LSZH with elevated flame retardance |
| 201 Stainless-Steel Armored | घराबाहेर, पुरले, rodent-prone, harsh environment | 140 N tensile; 24 h salt-spray |
सिंगल-कोर (simplex), ड्युअल-कोर (डुप्लेक्स), and multi-core cables in 4, 6, 8, 12, 24, 48 आणि 72-कोर कॉन्फिगरेशन. Custom core counts and lengths supported on request. Standard patch cord lengths run 0.5–30 m; custom lengths up to 300 m for special projects. Standard pigtail length is 1.0 - 1.5 मी.
एमपीओ / MTP is the connector platform driving the next decade of data-centre and AI cabling. A single MPO connector carries 8, 12, 16, 24, इथपर्यंत 72 तंतू, replacing dozens of individual patch cords with one plug. Our dedicated MPO production runs 150,000 cords per month सह 100% ferrule interferometer inspection and per-core polarity verification.
| Link Speed | Fiber Count Required | फायबर प्रकार | पोहोचते |
|---|---|---|---|
| 40G SR4 | 8 तंतू (4Tx + 4Rx) | OM3 / OM4 | पर्यंत 550 मी (OM4) |
| 100G SR4 / SR10 | 8 किंवा 20 तंतू | OM3 / OM4 / OM5 | पर्यंत 550 मी |
| 400G SR8 / DR4 | 16 तंतू / 8 तंतू | OM4 / OM5 / एकल-मोड | पर्यंत 100 मी (SR8) / 500 मी (DR4) |
| 800G SR8 | 16 तंतू | OM4 / OM5 | पर्यंत 100 m — today’s AI cluster mainstream |
When you place an order, please confirm polarity type, gender configuration, connector-color scheme, and core-count breakout — our sales team will validate against your target optical modules before production begins.
| पॅरामीटर | मूल्य |
|---|---|
| Test standard | IEC 61300 (वर्ग U); Telcordia GR-326-CORE (वर्ग आर) |
| अंतर्भूत नुकसान (ठराविक) | Standard ≤ 0.3 dB; low-loss grade ≤ 0.15 dB (MPO single-mode) |
| परतावा तोटा | UPC ≥ 50 dB; APC ≥ 55 dB |
| ऑपरेटिंग तापमान | −20 to +60 °C (सर्व ऑप्टिकल आणि यांत्रिक निर्देशांक पॅच कॉर्डला भेटतात); −40 to +85 °C (बख्तरबंद & branch series) |
| स्टोरेज तापमान | −40 to +85 °C |
| Mating durability | अनुसूचित जाती / एल.सी / FC ≥ 1,000 सायकल; MPO ≥ 500 सायकल |
| ताणासंबंधीचा शक्ती | मानक 45 एन; शाखा 40 एन (long-term); बख्तरबंद 140 एन |
| किमान बेंड त्रिज्या | Standard cord 10 मिमी; MPO branch 15 mm static / 30 mm dynamic; armored 35–40 mm |
| हमी | 1-वर्षाची फॅक्टरी वॉरंटी; design service life 10 वर्षे |
| मालिका | Monthly Output |
|---|---|
| Simplex patch cord | 10,000,000 cords |
| Duplex patch cord (top-3 producer nationally) | 3,000,000 cords |
| एमपीओ / MTP series | 150,000 cords |
| Breakout patch cord | 90,000 cords |
Optical fiber sourced from China’s four leading brands — YOFC, ZTT, Hengtong आणि Fiberhome — the same feedstock trusted by tier-1 operators worldwide. Ceramic ferrules are Sanhuan series by default, सह Sumitomo ferrules available on request for the tightest concentricity requirements. Jacket compounds come from Shanghai Kaibo, a stable supplier to the same four fiber manufacturers.
Insertion-loss variation between production batches is held within ±0.08 dB. Colour consistency for OEM orders is managed by keeping a first-piece reference sample from every batch for direct comparison on subsequent orders.
प्रमाणन लागूता उत्पादन लाइन आणि गंतव्य बाजारानुसार बदलते. Please confirm target market and required standards when requesting a quotation.
Standard simplex and duplex patch cords have MOQ नाही — sample and trial orders are welcome. MPO cords typically start at 100 युनिट्स. Armored cords have a 1,000-piece MOQ due to armor tooling setup; delivery within 10 दिवस. OEM-printed packaging requires 5,000 pieces minimum.
Regular configurations of simplex, duplex and standard MPO ship from stock within days — we keep 2,000–3,000 pieces of common SKUs like SC/UPC duplex 2.0 mm LSZH in-stock. MPO custom orders: 7–12 days for a few thousand pieces; 15–20 days for orders above 20,000 तुकडे. Branch patch cords: samples ready in 3 दिवस.
होय. Every cord ships with 100% factory testing (द, आर.एल, end-face, tensile). Electronic test reports in FLUKE or EXFO format are available after order placement. 3D end-face inspection is standard on all MPO production and available on request for other cord types.
Standard-grade MPO: insertion loss ≤ 0.7 dB (मल्टीमोड 850 / 1310 nm). Low-loss grade: ≤ 0.35 dB सरासरी. Single-mode MPO with high-precision imported ferrules can reach IL as low as 0.15 dB for testing and telecom-grade applications. Standard grade covers enterprise networks and office cabling; low-loss grade is designed for high-density cabinet cabling and 100G+ mainstream links.
होय. Standard MPO breakout defaults: 12-core → 6 duplex LC; 24-core → 12 duplex LC. Custom splits including 2×12, 3×८, 4×6 and other ratios are fully supported. MPO–MPO breakout allows up to 6 MPO connectors on a single end, with both ends symmetric. Trunk length range: 0.2 मी ते 300 मी; branch length differences within a single cable should stay within 30 cm to avoid fiber-stress attenuation drift.
Our MPO cords stably support 40जी, 100जी, 400G आणि 800G parallel optical transmission. This makes them suitable for current AI data-centre cluster fabric, hyperscale MDA cabling, and next-generation coherent transport buildouts. OM4 / OM5 multimode is the current mainstream for 400G / 800G SR8 links; single-mode covers longer reach and DR4 architectures.
होय. Our patch cords meet the applicable UL, ETL and TUV test standards. Formal third-party certification can be arranged per project on request — test cost is quoted separately depending on the scope required.
Optical fiber from YOFC, ZTT, Hengtong आणि Fiberhome. Ceramic ferrules are Sanhuan by default; सुमितोमो ferrules available on request. Connector grades range from network-level (mainstream cost-performance) to telecom-level (highest concentricity, lowest IL) — specify per project.
Our armored patch cords use a 201 stainless-steel spiral armor layer. Tensile strength reaches 140 एन (विरुद्ध 70 N for standard cords) and the armor passes a 24-hour salt-spray test, making them suitable for marine shipping and coastal deployments. Best for static routing with occasional bending — not recommended for high-frequency repeated flexing. For buried installations, an additional protective conduit is recommended to prevent long-term corrosion.
होय. We produce to your artwork — custom colour boxes, बाह्य कार्टन लोगो, खाजगी-लेबल PE पिशव्या, spec-sheet inserts and branded manuals. Neutral packaging is available with no minimum quantity. Printed packaging with custom logo requires 5,000 pieces minimum to justify plate setup.
आम्ही आत प्रतिसाद देऊ 12 तास, कृपया प्रत्यय असलेल्या ईमेलकडे लक्ष द्या “@fibconet.com”.
तसेच, वर जाऊ शकता संपर्क पृष्ठ, जे अधिक तपशीलवार फॉर्म प्रदान करते.
