Shigar da madaidaicin fiber opice sosai a ciki kuma yadda ya kamata ya buƙaci hankali ga daki-daki da riko da takamaiman hanyoyin.
Ga wani tsari mai tsari don tabbatar da ingantaccen shigarwa, Kare amincin Farin Farin Cikin Hakkin Cibiyar Hanyar Key.
1. Tsarin zare na zare:
- Cire jaket na USB: Fara ta cire jaket na waje na na taptical na gani. Idan an gama, Cire kowane garkuwa da makamai, Sannan kwato da yadudduka don bijirar da sako-sako da shambura. Bi hanyoyin da aka ba da shawarar masana'anta na USB don wannan. Bar tsawon 3-mita na USB na gaba.
- Tsabtace da Ramin: Yi amfani da maganin tsabtatawa don tsaftace ɗumbin bututun da kuma ƙarfin ƙarfin memba. Cire duk wani wuce haddi cike da jaket na waje na kimanin 150mm ta amfani da Sandaper don tabbatar da tsaftataccen wuri don rufe.
2. Cible shigarwa a cikin Fib na Cibiyar Cibiyar Fib:
- Zaɓi da kuma haɗa ƙawan zoben: Zabi zobe zobe wanda ya dace da dias ɗin na waje. Sanya zobba biyu akan kebul.
- Saka kebul: Matsayi na USB a cikin rami shigar da aka tsara na ƙulli.
- Groundinging: Haɗa da ƙasa garkuwa ta USB na USB.
- Hatimi tare da tef: Kunsa teburin rufe ido tsakanin zoben biyun don daidaitawa tare da na waje na zoben, ƙirƙirar ƙarshen kebul na kebul.
- Amintaccen kebul: Sanya kebul na kebul ɗin da aka rufe a cikin ƙulli kuma ka yi amfani da matattarar matsa don amintaccen kebul zuwa tushe na ƙulli na ƙulli na ƙulli. Kara matsa lamba don tabbatar da kwanciyar hankali.
- CLABS: Amintaccen kogon Green na Green akan USB na Fiber kuma Gyara wanda ya wuce. Yi amfani da maɓallin launin shuɗi na shuɗi don naúrar, shima yana trimming wuce haddi.
- Bley Ports: Ga kowane tashar jiragen ruwa ba a amfani da shi, rufe su da wasu wuraren da aka ba da su a cikin tef.
3. Fiber spiccing:
- Gudanar FIB: Keɓe 1.5 madaukai na fiber a bayan tire, Sannan kunsa duk wasu zaruruwa a cikin ƙulli.
- Tuban buffer: Yi amfani da bututun mai buffer guda ɗaya don mutum na fibers da ribbon buffer shambers don ribbon fiibers. Amintattun zaruruwa a cikin hanyar shigowa tare da dangantakar nailan, amfani da launuka daban-daban don rarrabe tsakanin mai fita (kore) da abokin ciniki (blue) igiyoyi.
- Fiber spiccing: Bi hanyar da aka ayyana zuwa Slice FIBER. Saka tushen a cikin ramuwar slots na splice, Gudanar da duk wani wuce haddi ta hanyar rufewa a cikin tire.
- Tray ƙulli: Sanya murfi a kan splicing tire kuma latsa ƙasa don kulle shi cikin matsayi.
- Tray stacking: Ya danganta da damar da aka buƙaci ƙulli na ƙulli, tari da splice trays daidai. Ya kamata a sanya trays a hanyar da ke bin aikin fiber, m, da kuma bukatun tabbatarwa. Misali, amintaccen tari guda biyar ta hanyar ɗaukar na biyu da na uku, da na uku da na huɗu trays tare kamar yadda aka bayyana. Lokacin da ake buƙatar kulawa, trays za a iya samun dama kamar juya shafi a cikin littafi.
Idan kana bukata fiber splice ƙulli samfuran ko jagororin shigarwa, Tuntuɓi Fibonet don ƙarin attumomin!
