FIBCONET yana kera kebul na fiber optic clamps da hardware don iska FTTH, ADSS tsawon lokaci, adadi-8 mai goyan bayan kai da shigarwa na USB. Haɗaɗɗen fitarwa a kan babban layin mu na matse filastik ya kai guda miliyan daya a wata, tare da kwazo stamping da allura tooling goyon bayan sauri MOQ daga 100 guda.
Ana gwada kowane manne IEC 60794-1-2 Hanyar tensile kafin kaya, tare da ƙarfin juzu'i na kowane tsari, bayyanar da taurin tabbatarwa. Ana samun abubuwan haɗin ƙarfe a ciki 201 ko 304 bakin karfe, zafi-tsoma galvanized carbon karfe, ko Die-cast aluminum gami - wanda ya dace da yanayin ku, tsawon tsawon lokaci da manufa ta rayuwa.
A ƙasa akwai iyalai guda shida da ke jigilar kayayyaki a halin yanzu zuwa ma'aikatan sadarwa, FTTH masu kwangilar injiniya, ayyukan wutar lantarki da ayyukan watsa labarai na birni a duk faɗin kudu maso gabashin Asiya, Gabas ta Tsakiya, Latin Amurka, Turai da Afirka.
| Jerin | Aiki | Ƙididdigar Ƙarfafawa | Aikace-aikace na yau da kullun |
|---|---|---|---|
| Tashin filastik / Anchor matsa (PA6 / PA66) | Tsayawa tasha, axial tashin hankali load | 600 N- 8 kN | FTTH faɗuwar iska, ADSS lokaci guda, bango / sandar sandar tasha kayyade |
| Aluminum Alloy Tension Clamp (Mai nauyi) ⭐ | Tsayayyar axial mai tsayi mai tsayi a cikin matsanancin yanayi na waje | Har zuwa 10 kN rated | Yankunan gishiri-gishiri, duk-Optical harabar, kashin bayan sa ido, ganga m masana'antu |
| Dakatar Dakatarwa (J- Nau'in, Roba + Galvanized Karfe) | Load a tsaye kawai - yana goyan bayan nauyin kebul akan sandunan layi madaidaiciya | An ƙididdigewa 1.5 kN a tsaye, karya 3.8 kN | Tsawon layin ADSS madaidaiciya mai tsayi, tsaka-tsakin iyakacin iyaka akan gangar jikin iska |
| Bakin Karfe Drop Waya Matsawa (201 / 304) | Ƙaddamar da tashar tasha don digo na USB da siriri ADSS | 600 N- 3 kN (kauri dogara) | Farashin FTTH, tashar waje, bakin teku / marine deployments (304) |
| Hoto-8 Cable Clamp | Riƙe adadi-8 kebul mai goyan bayan kai a ainihin manzo | Daidaita zuwa 2.5 mm galvanized manzo | Hoto-8 (GYXTC8S) tura jiragen sama |
| Na'urorin haɗi na Hardware | Sanyin sanda, hawa hoop, santsi-kumburi, bakin karfe band & dunƙule | 2.5 kN - 6 kN (sandar sandar); 4 kN (hawa hoop) | Gyaran sandar sanda, hawan bango, hanyar kebul, bandeji-madauri |
Na yau da kullun na cikin gida-aji robobi ne ba a ba da shawarar sosai ba don shigarwar iska na dogon lokaci a waje - ba su cika ƙayyadaddun ƙwaƙƙwaran tarho ba. Ga kowane tura waje, zaɓi jerin filaye masu ƙima na waje (UV-haɗin PA6/PA66), aluminum gami, ko bakin karfe daga teburin da ke sama.
Wannan shine mafi yawan tushen rikicewar mai siye, don haka yana da daraja kasancewa daidai:
| Tashin hankali / Anchor matsa | Dakatar Dakatarwa | |
|---|---|---|
| Abin da yake yi | Yana riƙe da cikakken tashin hankali axial na kebul - yana kashe ƙarfi a ƙarshen layin | Yana goyan bayan nauyin tsaye na kebul kawai - baya ɗaukar tashin hankali axial |
| Inda ya tafi | Tashoshin layi, sandunan sanda, matattu-karshen, maki gubar kayan aiki | Sandunan layi madaidaiciya tsakanin tashoshi, tsaka-tsakin gyarawa |
| Load da bayanin martaba | Ƙarfin jan hankali na kwance + duk axial tashin hankali | lodi a tsaye (na USB kai nauyi) kawai |
| Mahimman ƙimar tensile na yau da kullun | 600 N- 10 kN dangane da abu | 1.5 kN a tsaye / 3.8 kN karya ƙarfi |
| Ka'idar babban yatsa | Kowane layin-ƙarshen da kowane canjin shugabanci yana buƙatar ɗaya | Yi amfani tsakanin tashoshi don hana sag na USB akan nisa |
Tambayoyi huɗu suna fitar da zaɓin da ya dace: aiki, Nau'in na USB, muhalli, kuma kaya mai ƙarfi.
| Nau'in Kebul | Jerin Matsawa Na Shawarar |
|---|---|
| FTTH drop na USB (malam buɗe ido / nau'in baka) | Filastik PA6/PA66 matsa lamba, ko bakin karfe digo waya manne don amfani da bakin teku |
| ADSS guda-jaket, ya kai har zuwa 200 m | Filastik PA6 manne tare da waya SS201 (gajeren lokaci); aluminum gami 10 kN (dogon zango) |
| ADSS biyu-jaket, ya kai har zuwa 300 m | Aluminum alloy tashin hankali matsa; dakatarwa clamps tsakanin tashoshi |
| Hoto-8 kebul mai goyan bayan kai (GYXTC8S) | Hoto-8 igiyar igiya ta dace da 2.5 mm galvanized manzo |
| Kebul na zagaye, 2- 8 mm diamita | Bakin karfe zagaye-kebul matse |
| Flat / Fata na fata, 2× 3 mm ko 2 × 5 mm | PA66 nailan lebur na USB matsa, har zuwa 1,062 N tensile |
| Muhalli | Abubuwan da aka ba da shawarar | Rayuwar Sabis da ake tsammani |
|---|---|---|
| Gabaɗaya waje, cikin ƙasa, matsakaicin yanayi | Matsayin waje na PA6 / PA66 tare da ƙari na UV | 20+ shekaru |
| Gishiri na bakin teku, m marine daukan hotuna | Aluminum gami (trivalent chromium passivation) ko 304 bakin karfe | 10- shekaru 15 (goron ruwa); 15+ shekaru (SS) |
| Gishiri mai nauyi na bakin teku, bakin teku | 304 bakin karfe, zafi-tsoma galvanized dakatar jiki | 15+ shekaru |
| Chemical / yanayin masana'antu | 316 bakin karfe band & dunƙule | Aikace-aikacen dogara |
| Masu tashi na cikin gida, na wucin gadi wayoyi | Daidaitaccen manne filastik abin karɓa | Aikace-aikacen dogara |
Kowane manne yana da takamaiman kewayon diamita na USB. Na gama gari da muke kerawa: 3- 9 mm (filastik tashin hankali); 3- 10 mm (aluminum gami); 5-20mm a fadin A/B/C/D masu girma dabam (dakatarwa); 2- 8 mm (zagaye karfe). Koyaushe tabbatar da ainihin OD na kebul na manufa kafin yin oda.
| Siga | Daraja |
|---|---|
| Gwaji misali | IEC 60794-1-2 Hanyar tensile (5 mm/min loading rate a dakin zafin jiki) |
| Kayan jiki | PA6 / PA66 filastik injiniyan budurwa (V0 flame-retardant on request); die-cast aluminum alloy; 201 / 304 bakin karfe; zafi-tsoma galvanized carbon karfe |
| Steel wire material | SS201 (Duk ma'aunin gani da injina sun haɗu da igiyar faci); Saukewa: SS304 (bakin teku / high corrosion) |
| Steel wire length | Har zuwa 50 cm per side custom (aluminum alloy series) |
| Operating zazzabi | -40 ku +80 °C (plastic and aluminum series); −15 to +60 °C (standard PA6 tension) |
| Salt-spray resistance | 96 hours neutral salt-spray test with no visible corrosion (304 stainless); exceeds market standard 72 ha h |
| Juriya UV | UV-additive plastic tested for 20-year outdoor service life without cracking |
| Flame retardancy | V0 grade available on request for plastic series |
| Zane sabis rayuwa | Filastik 20 shekaru; aluminum gami 25 shekaru; dakatarwa manne 25 shekaru |
| Shigarwa | Hand installation, no special tools required for most series; installation videos provided per SKU |
Aiwatar da takaddun shaida ya bambanta ta layin samfur da kasuwar makoma. Da fatan za a tabbatar da ƙasar da ake nufi, yanayin turawa da ma'aunin da ake buƙata lokacin neman zance.
MOQ ya bambanta da jerin: 100 guda don roba da bakin karfe digo-waya clamps; 500 guda don matsawa dakatarwa, tashin hankali nau'in wedge, hardware brackets da hoops; 1 guntu ga bakin karfe band & zare samfurin. Ana samun haɓaka ƙirar ƙira ta al'ada kyauta don cancantar kundin.
Manne dakatarwa: 10 kwanaki. Filastik manne wayoyi da bakin karfe: yawanci 10-15 kwanaki dangane da yawa. Aluminum alloy da al'ada-launi ko al'ada-mold ginawa: nakalto kowane aikin. Saitunan SKU na yau da kullun ana riƙe su a hannun jari kuma ana iya aikawa cikin kwanaki.
Ee. Muna goyan bayan alamar tambarin Laser akan sassan filastik da karfe, tambarin bugu na mold don oda mai girma, gyare-gyaren launi na harsashi akan maƙallan filastik, da cikakkun marufi masu zaman kansu (tambarin kwali na waje, lambobi masu alamar siye, Buga tambarin samfur). Ana tallafawa haɓaka ƙirar ƙira ta al'ada kuma galibi ana bayar da ita kyauta don cancantar kundin oda.
A tashin hankali (anga) matsa yana riƙe da cikakken tashin hankali axial na kebul a tashoshin layi, sandar sandar sasanninta da maki-a cikin jagora - yana ɗaukar ƙarfin ja a kwance. A dakatarwa manne kawai yana goyan bayan nauyin tsaye na kebul akan sandunan layi madaidaiciya tsakanin tashoshi - baya ɗaukar tashin hankali axial. Kowane ƙarshen layi yana buƙatar mannen tashin hankali; ƙuƙuman dakatarwa suna shiga tsakanin don hana sag na USB.
Don matsanancin yanayin fesa gishiri, amfani 304 bakin karfe domin duk karfe sassa - mu 304 daraja a 96 h Gwajin fesa gishiri mai tsaka tsaki ba tare da lalatawar gani ba (wuce ma'aunin masana'antu 72 ha h). Aluminum gami tare da trivalent chromium passivation ne mai ƙarfi madadin ga manne jiki, isar da 10-15 shekaru na barga sabis a cikin m bakin teku hazo. Guji 201 bakin karfe da galvanized carbon karfe don tsawaita amfani da bakin teku - farashin kulawa na dogon lokaci zai wuce bambancin farashin farko..
Kimomi ta jerin gwano: 600 N (Duk ma'aunin gani da injina sun haɗu da igiyar faci 0.5 mm bakin karfe drop-waya matsa) har zuwa 1,500 N don kauri bambance-bambancen karatu; 1.5 kN - 3 kN don daidaitattun magudanar ruwa na filastik; 2.5 kN - 6 kN don dangin ƙwanƙwasa bakin ciki; 4 kN don dakatarwar matsawa ƙarfi (rated 1.5 kN a tsaye); har zuwa 8 kN don PA1500 nauyi filastik anka; har zuwa 10 kN don mutu-cast aluminum gami tashin hankali matsa; har zuwa 15 kN don jerin hardware (bakin karfe & dunƙule).
A'a. Matsalolin tashin hankali namu suna amfani da a tsinke kai-kulle + ƙirar kariya mai taushi-lamba wanda ke rarraba tashin hankali a ko'ina a kan sashin tuntuɓar maimakon mayar da hankali kan batu guda. Makullin dakatarwa suna amfani da a TPR mai laushi na roba + galvanized karfe harsashi tsarin hade wanda ke kama kebul ba tare da murƙushe jaket ɗin ba ko gabatar da asarar microbend zuwa fiber na ciki.
Yawancin jerin mannenmu suna shigarwa da hannu ba tare da kayan aiki na musamman ba - ƙirar kulle kai tsaye tana shiga lokacin da ake amfani da tashin hankali. Muna ba da bidiyon shigarwa na sadaukar don kowane jerin. Don aminci muna ba da shawarar saka safofin hannu lokacin da ake sarrafa bakin karfe. Matsakaicin ƙugiya na Bolt suna amfani da daidaitattun ƙusoshin hex M4/M5/M6 masu dacewa da wrenches na gama gari..
Zane sabis rayuwa: 20 shekaru don mannen filastik UV; 25 shekaru ga aluminum gami da dakatar clamps; 15 shekaru a cikin wuraren fesa gishirin bakin teku don matsananciyar dakatarwar galvanized mai zafi; 10 shekaru + ga bakin karfe digo-waya clamps a general waje amfani. Daidaitaccen manne filastik na cikin gida ba su dace da na'urorin jirage na waje na dogon lokaci ba.
Ee. Samfuran guda ɗaya kyauta ana samunsu akan mafi yawan SKUs gami da matsananciyar tashin hankali na PA6. Samfuran kyauta har zuwa 5 guda a kan bakin karfe zagaye-kebul matse. Masu saye suna biyan samfurin jigilar kayayyaki, wanda aka ƙididdige shi akan oda mai yawa na farko. Ana nakalto samfuran launi na al'ada ko na al'ada ta kowane aiki.
Za mu amsa a ciki 12 hours, da fatan za a kula da imel tare da suffix "@fibconet.com".
Hakanan, za ku iya zuwa Shafin Tuntuɓa, wanda ke ba da ƙarin cikakken tsari.
