Fiber Optic PLC Splitter Manufacturer — Since 1994

FIBCONET has manufactured planar lightwave circuit (PLC) splitters in China since 2008. Our automated lines produce up to 500,000 PLC splitters per month across four package families — from mini steel-tube types used inside FTTH drop closures to cassette plug-in modules deployed in operator central offices.

Every splitter we ship is 100% सम्मिलित हानिको लागि परीक्षण गरियो on the production line, then verified through high-and-low temperature cycling before packaging. Chips come from a controlled dual supply chain combining domestic Chinese sources (Shijia, Lixin) and Japanese/Korean options (Worriro, IPP) — so we match the cost, lead time and performance profile your project actually needs.

Below are the four PLC splitter families currently shipping to FTTH operators, ODN integrators and telecom distributors across Russia, ल्याटिन अमेरिका, Southeast Asia and the Middle East.

4 PLC Splitter Series We Manufacture

Need a split ratio, connector or fibre type not listed above? We mould our own housings and can build asymmetric ratios such as 1:3, 1:9, 5:95 र 2:8 on request — parameters are confirmed per project before quotation.

What Is a PLC Splitter and How to Choose the Right Type

A PLC (प्लानर लाइटवेभ सर्किट) splitter is a passive optical device that divides one incoming optical signal evenly across multiple outputs, without needing power. In a GPON or XG-PON network, PLC splitters sit between the OLT in the central office and up to 64 सदस्यहरू, forming the “point-to-multipoint” architecture that makes fibre-to-the-home affordable.

PLC vs FBT — When to Use Each

If you need standard 1×N distribution above 1×4, choose PLC. For asymmetric or non-power-of-2 ratios with few ports, choose FBT.

Split Ratio Guide: From 1×2 to 1×64

Non-standard ratios such as 1:3, 1:9, 2:8, 3:7 र 5:95 are available on request.

Package Type Selection Matrix

Technical Specifications Across All PLC Splitter Series

Note on insertion loss. Our patch-cord line achieves connector IL down to 0.1 dB. This value applies to the connector alone and does not replace the PLC splitter loss budget. PLC IL is governed by the split ratio (see table above), plus a 0.2–0.3 dB connector allowance when connectors are attached.

उत्पादन क्षमता र गुणस्तर नियन्त्रण

32 Years of PLC Splitter Production Since 1994

FIBCONET began as a PLC splitter factory in 1994, six years before the first commercial GPON deployment. That head start let us build the supply-chain relationships and in-house tooling — housing moulds, alignment jigs, potting recipes — that most fibre passives vendors still buy in from third parties.

Combined monthly output across all PLC package types reaches approximately 1,000,000 units per month, on automated alignment lines where a single operator runs two machines in parallel.

Chip Supply Chain — Domestic and Imported Options

The PLC chip drives 60–70% of the finished splitter’s optical performance. We keep two supply channels active in parallel: domestic chips (Shijia, Lixin) as our default choice for cost, lead time and production availability — current-generation Shijia yield matches import quality — and imported chips (Worriro Japan, IPP Korea) for customers who specify origin or the tightest IL uniformity. Because we also hold contract positions upstream in fibre array (FA) and ferrule supply, our IL uniformity holds across batches without input-geometry drift.

100% IL Testing, Drying Room, and Temperature Cycling

• 100% insertion loss inspection — every unit IL tested before packaging, not sampled. Test videos provided per batch on request.
• Optional 3D end-face inspection — surcharge applies; percentage-based pricing depending on inspection coverage.
• Drying room - पिगटेल बफर र कनेक्टर फेर्युलहरूमा ओसिलो अपटेक रोक्न प्याकिङ गर्नु अघि समर्पित कम आर्द्रता कोठामा राखिएको प्रत्येक ब्याच।. यो चरण क्षेत्र मा दीर्घकालीन IL स्थिरता को एकल सबैभन्दा ठूलो चालक हो.
• उच्च-कम तापक्रम साइकल चलाउने — −40 °C देखि उमेरका ब्याचहरू +85 °C चक्र प्रति Telcordia GR-1221 पद्धति. चिसो क्षेत्रका ग्राहकहरूका लागि केही उत्पादन लाइनहरूमा स्क्रिनिङ −50 °C सम्म विस्तार हुन्छ (स्क्रिनिङ मात्र, निरन्तर सञ्चालन मूल्याङ्कन छैन).

तेस्रो-पक्ष परीक्षण रिपोर्टहरू (इलेक्ट्रोनिक, छाप लगाइएको) अनुरोध मा उपलब्ध.

PLC स्प्लिटर सोर्सिङको बारेमा प्रायः सोधिने प्रश्नहरू

Q1. मानक PLC स्प्लिटरहरूको लागि तपाईंको न्यूनतम अर्डर मात्रा के हो?

मानक-अनुपात क्यासेट र बक्स PLC स्प्लिटरहरू थोरै बाट सुरु हुन्छ 2 एकाइहरू - नमूना र परीक्षण आदेश स्वागत छ. Mini and ABS box regular ratios ship from stock. Long-term partners can negotiate consignment or blanket terms. Silk-screen branded steel tubes require an MOQ of 1,000 pieces at no extra cost.

Q2. What is the lead time for a bulk order?

Regular ratios in standard packages are held in stock and ship within days. For a 5,000-piece 1×8 mini PLC order the typical lead time is around 20 days from PO, including approximately one week for raw material staging. Urgent orders can be prioritized on the production schedule; please flag urgency at RFQ stage.

Q3. Can you customize non-standard split ratios such as 1:3, 1:9 वा 5:95?

हो. All uneven ratios including 1:3, 1:9, 2:8, 3:7 र 5:95 समर्थित छन्, along with 2×N configurations. Insertion loss and uniformity meet industry standards; send us the required ratio, pigtail length and connector type and we will confirm specification, price and lead time.

Q4. Do you supply Telcordia GR-1209 / GR-1221 compliant units?

Our PLC splitters are designed and tested to match the reliability methodology defined in Telcordia GR-1209 (passive branching components) and GR-1221 (reliability qualification). Full test reports from accredited third-party labs can be arranged for project bids.

Q5. Do you provide OEM or private-label packaging?

हो. We produce to your artwork — custom colour boxes, outer carton logo, private-label stickers, spec-sheet inserts and branded manuals. Full OEM/ODM support is standard.

Q6. What is the warranty period and expected service life?

Standard factory warranty is 1 year against manufacturing defect. Design service life is 10 years or longer for mini PLC and 25 years or longer for cassette / box PLC, based on our accelerated ageing test data.

Q7. Which fibre type do you recommend — G.657.A1, G.657.A2 or G.652.D?

We default to G.657.A1 (10 मिमी न्यूनतम मोड त्रिज्या) rather than G.652.D (15 मिमी न्यूनतम मोड त्रिज्या), because the tight coiling inside splitter housings will cause additional loss or even fibre breakage with G.652.D. G.657.A2 (7.5 मिमी न्यूनतम मोड त्रिज्या) is available for the most compact form factors or drop-cable integration.

Q8. Can you provide test videos and quality reports per batch?

हो. Insertion loss test videos, optional 3D end-face inspection videos and stamped third-party test reports are available on request. Video content can be customized to buyer inspection protocols.

Q9. Do you ship to Russia, ल्याटिन अमेरिका, the Middle East or Africa?

हो. We currently ship to operators, integrators and distributors across all four regions. LGX modules with the Russia-market mould are a stocked variant. Please advise Incoterms and destination port at RFQ stage — DDP feasibility can be evaluated for selected destinations.