IP68 Waterproof Fiber Optic Connector Manufacturer — Huawei / ZTE / Fibrehome / OptiTap / Fullaxs Compatible

Producent Fibconetu 12 series of outdoor waterproof fiber optic connectors used in FTTH drop-cable terminations, FTTA base-station jumpers, and outdoor ODN cross-connect points. Product families cover IP65, IP67 and IP68 sealing grades, with housings in PA, PEI and metal, selected per model and per project environment.

All series are cross-compatible with mainstream OEM interfaces — Huawei, ZTE, Fibrehome, OPTOWAĆ, FULLAXS, ODVA OptiTap, PDLC, NSN and ODC — so field crews can replace legacy assemblies without changing the enclosure or the drop-cable spec. Typical order size starts from 1,000 szt.; OEM labeling, custom pigtail lengths and bulk packaging are supported for distributors, ISPs and EPC contractors.

The sections below list our 12 series grouped by application, followed by the IP-rating selection logic, technical specifications, możliwości produkcyjne, FAQ, oraz kanał notowań.

12 Waterproof Connector Series We Manufacture

Grupa 1 — Brand-Compatible Outdoor Connectors

Used to replace or extend existing Huawei / ZTE / Fibrehome / OPTOWAĆ / Fullaxs deployments. Interface geometry, keying and sealing follow the original OEM footprint so no adapter is needed.

Grupa 2 — Standard OptiTap / PDLC Connectors

Follow ODVA / MSA industry standards rather than a single OEM. Preferred by North American ISPs and by carriers running multi-vendor networks.

Grupa 3 — Field-Assembly Connectors

Terminated on site with no polishing, epoxy or oven. Cuts install time on a single drop from 20+ minutes to under 3 minuty.

Grupa 4 — Waterproof Adapter

Passive coupler used inside outdoor enclosures or between two waterproof pigtails.

What Is a Waterproof Fiber Optic Connector and How to Choose the Right Type

IP65 vs IP67 vs IP68 — What Each Rating Really Means for Outdoor Fiber

The IP code from IEC 60529 defines protection against solids (first digit) i woda (second digit). For outdoor fiber, only the water digit varies in practice.

Notatka: IP68 is the only rating that lets the manufacturer define the immersion depth and duration. Always ask for the test report if a project spec calls out “IP68” without a depth value.

How to Match the Connector to Your Field Scenario

• You are replacing a specific carrier’s legacy hardware → choose the brand-compatible series (powstał nasz konwerter światłowodowy typu „trzy w jednym” / ZTE / Fibrehome / OPTOWAĆ / FULLAXS) so the enclosure and drop cable stay unchanged.
• You run a North American multi-vendor FTTH network → standardize on OptiTap Type B; ODVA MSA guarantees interchangeability across suppliers.
• You need fast field terminations without polishing tools → choose the field-assembly series; a trained crew can seat a connector in about 3 minuty.
• You deploy FTTA between BBU and RRU → use OPT-compatible IP68 or Fullaxs-compatible IP68 with LC duplex geometry.
• You need a mid-cable in-line coupler inside an outdoor enclosure → use the Mini LC waterproof adapter, not another connector.

Housing Material — PA, PEI or Metal

Material is selected per model, not per customer request. As a general rule:

• PA (polyamide): standard outdoor housing; balances cost, UV resistance and impact strength.
• PEI (polyetherimide): higher heat and chemical resistance; used where sun exposure or salt spray is severe.
• Metal reinforcement: used on selected FTTA and base-station models where mechanical crush load is a project requirement.

Specyfikacja techniczna

Notatka: powyższe wartości są typowe dla rodziny, a nie arkusz danych dotyczący pojedynczego SKU. Poproś nas o konkretny raport z testów modelu, który cytujesz; wysyłamy go pod numerem części modelu.

Możliwości produkcyjne i kontrola jakości

Production History

Działalność macierzysta Fibconet w optycznych elementach pasywnych sięga roku 1994. The waterproof connector line was industrialized after the FTTx wave in China, and today ships to ISPs, EPC contractors and distributors in more than 40 kraje.

Raw Material and Supply Chain

Okucia, sleeves and pigtails are sourced from long-term qualified suppliers. Housings are injection-molded in-house from qualified PA and PEI resins so batch-to-batch dimensional consistency stays under control. G.657.A2 drop-cable pigtails are supplied through our deep bare-fiber inventory and brand distribution partnerships.

In-line and Outgoing Quality Control

• End-face 3D interferometry per Telcordia GR-326 on 100% of factory-terminated pigtails.
• Insertion loss and return loss test with reference master jumper, batch-recorded.
• Sealing test on 100% of housings before packaging; extended immersion, spray solny, UV and thermal-cycle testing performed per model qualification and per project requirement.
• Serialized test data available on request for tender projects.

Certyfikaty i zgodność

Fibconet działa w ramach ISO 9001 system zarządzania jakością. Product-level certification — RoHS, ZASIĘG, Telcordia GR-326 / GR-3120 test reports, and OEM-specific interface compatibility declarations — is issued per model and per project requirement. Prześlij nam swój rynek docelowy i listę modeli, i wraz z wyceną zwracamy odpowiedni zestaw certyfikatów.

Opakowania, OEM and Custom Labeling

• Standardowe opakowanie: individual anti-static bag → inner carton (50 lub 100 szt.) → export master carton with pallet marking.
• OEM labeling: your logo and part number on the connector body, on the bag, and on the carton.
• Custom pigtail length: any length from 0.5 m do 300 m, cut and terminated to your bill of materials.
• Kitting: złącze + upuścić kabel + gel + tool bundled into a single field-install kit for ISPs and EPC crews.

Minimum order quantity starts at 1,000 pcs per model. Mixed-model orders are accepted above 3,000 pcs total.

Często zadawane pytania

Pytanie 1. Are your waterproof connectors truly interchangeable with the original Huawei / ZTE / Fibrehome / OPTOWAĆ / Fullaxs hardware?

Tak. Interface geometry, keying and sealing are built to the original OEM footprint. Field crews can plug our connector into the existing enclosure port without changing the drop cable or the sealing gel. We send a compatibility declaration with the first shipment on request.

Pytanie 2. What is the difference between IP67 and IP68 for a fiber connector, w praktyce?

IP67 is qualified for 30-minute immersion at 1 m depth. IP68 covers longer or deeper immersion under conditions the manufacturer defines. For aerial and wall-mount drops IP67 is enough; for direct-buried joints or base-station jumpers exposed to standing water, ask for IP68 with a stated depth.

Pytanie 3. Can you terminate the pigtail with G.657.A2 fiber?

Tak. G.657.A2 is our default for FTTH drop-cable pigtails because it holds transmission at a 7.5 mm promień zgięcia. G.652.D and G.657.A1 are available if your project spec requires them.

Pytanie 4. Czy obsługujesz drukowanie OEM na korpusie złącza?

Tak. Laser marking on the housing, custom color for the boot, and custom label on the bag and carton are available from 1,000 pcs per model.

Pytanie 5. Jaki jest typowy czas realizacji?

Stock models ship in 5–7 working days. Custom pigtail length or OEM-labeled orders ship in 15–25 working days after order confirmation, w zależności od ilości. Potwierdź faktyczną datę na fakturze pro-forma.

Pytanie 6. Do you provide test reports with each shipment?

Tak. Insertion loss and return loss are batch-tested and reported per carton. End-face 3D interferometry data and extended qualification reports (spray solny, UV, thermal cycle) are provided on request or where the project tender requires them.

Pytanie 7. Can I mix models in a single order to reach MOQ?

MOQ jest 1,000 pcs per model. Mixed-model orders are accepted from 3,000 pcs total, split across two or three models. This lets distributors trial multiple compatibility options in one shipment.

Pytanie 8. Do you ship DDP to Europe, North America and Latin America?

We ship FCA, FOB, CIF and DDP. DDP is quoted per destination country because of customs, VAT and last-mile handling; send us the delivery address and we return a landed cost quotation.

Pytanie 9. What is the axial cable retention of your outdoor connectors?

Family-typical value is ≥ 50 n. Selected FTTA and base-station models are qualified to a higher load. Ask us for the model-specific pull-test report before you tender a project.

Pytanie 10. Can you support a NPI (new product introduction) for a proprietary interface we designed?

Tak. Send the interface drawing, sealing gel spec and target IP grade under NDA. Our engineering team returns a feasibility assessment within 5 working days and a sample within 30 dni robocze.