Xadhkaha Fiber Optic Patch & Soo saaraha Pigtail - SC/LC/FC/MPO, Gudaha, Banaanka & Hubaysan

FIBCONET waxay soo saartaa fiber optic xadhkaha dhejiska iyo doofaarrada oo dhan shan qoys oo alaabta - simplex & gudaha duplex, dhibic biyuhu, gaashaaman, Cufnaanta sare ee MPO, iyo doofaarka ODF - oo leh wax soo saar la isku daray oo aad u sarreeya 13 milyan xadhkaha bishii. Xadhig kasta waa 100% laga baadhay luminta galinta, khasaare soo noqda, xoogga jilicsan iyo tayada dhammaadka wejiga ka hor baakadaha.

Xadhkahayada balastarrada ah waxay buuxiyaan shuruudaha imtixaanka ee u dhigma ee lagu qeexay IEC 61300 (Fasalka U) iyo Telcordia GR-326-CORE (Fasalka R). Fiber Optical wuxuu ka yimaadaa afarta nooc ee Shiinaha - YOFC, Ztt, Hengtong iyo Fiberhome. Ferrules dhoobada waxay isticmaalaan taxanaha CCTC (Sumitomo ferrules waa la heli karaa haddii la codsado), iyo darajooyinka isku xidhaha waxay ka socdaan heerka shabakada ilaa heerka telecom si ay u dhigmaan qiimaha mashruucaaga iyo astaanta waxqabadka.

Ka baxsan xadhkaha isgaadhsiinta caadiga ah, annaga MPO / MTP line cufnaanta sare waxay taageertaa 40G, 100G, 400G iyo 800G Isku-gudbinta indhaha ee is-bar-bar-taagga ah - habka caadiga ah ee hadda jira ee xarumaha-dhismaha xogta-ku-shaqayso ee AI iyo fiilooyinka MDA-ga sarreeya. See the MPO section below.

5 Xadhkaha dhejiska & Pigtail Series We Manufacture

Taxan	Isticmaalka caadiga ah	Tilmaamaha Muhiimka ah	Xidhiidhiyayaasha
Indoor Simplex & Duplex Patch Cord	Data-centre patching, telecom room, cross-connect, in-cabinet routing	Insertion loss avg ≤ 0.3 dB; tensile 45 N; 2.0 / 3.0 mm jacket; LSZH available	SC, LC, FC, ST, MU, MTRJ, E2000 — PC / UPC / APC
Banaanka & Waterproof Drop Patch Cord	FTTH hoos u dhac, outdoor terminal box, CPRI fronthaul, base-station link	IP-rated seal; UV-resistant jacket; pre-connectorized options for 1–4 core drop	Mini SC, SC/APC, LC/APC waterproof
Hubaysan & Anti-Rat Patch Cord	Data-centre under-floor, in-conduit runs, underground burial, deegaan qallafsan	201 stainless-steel spiral armor; tensile 140 N (2× standard); milix-buufin 24 h; operating −40 to +85 °C	SC, LC, FC — UPC / APC
MPO / MTP High-Density Cord ⭐	Data-centre MDA, AI compute cluster fabric, 40G/100G/400G/800G parallel optics, high-density cabinet	Ilaa 72 fibers per MPO; single-mode IL down to 0.15 dB; multimode low-loss ≤ 0.35 dB; ≥ 500 wareegyada galmoodka	MPO / MTP male & female; hybrid MPO–LC / MPO–SC / MPO–FC breakout
Indoor Pigtail	ODF splicing, distribution box terminals, fusion-splice on-site	0.9 mm buffered pigtail; Dhammaan tusmooyinka indhaha iyo farsamada waxay la kulmaan xadhigga balastar 1.5 m length; custom lengths supported	SC, LC, FC — UPC / APC

Every series above is 100% factory-tested (end-face, khasaare galinta, khasaare soo noqda, tensile). Electronic test reports in FLUKE or EXFO format are available with each order.

Patch Cord vs Pigtail — What’s the Difference?

	Xadhkaha dhejiska	Pigtail
Connectorization	Connectors on both ends	Connector on one end only; other end bare fiber for fusion splicing
Primary use	Equipment-to-equipment or equipment-to-panel	ODF / distribution-box termination, fusion-spliced to the incoming cable
Dhererka	Caadi ahaan 0.5 - 30 m; caado ilaa 300 m	Caadi ahaan 1.0 - 1.5 m; custom on request
Rakibaadda	Plug-and-play	Requires fusion splicer on-site
ugu wanagsan	Data centre patching, MDA, cross-connect, PON drop	Central office, ODF panel splicing, distribution frames

How to Choose the Right Connector, Jacket and Fiber

Noocyada Xidhiidhiyayaasha & End-Face Contact

We manufacture patch cords with all mainstream connectors: FC, ST, SC, LC, MU, MPO / MTP, E2000, MTRJ, SMA. End-face contact is available in three types:

• PC (Xiriirka Jirka) — return loss around 40 dB, legacy applications
• UPC (Xiriirka Jirka ee Ultra) — return loss ≥ 50 dB, mainstream data-centre and enterprise
• APC (Xiriirka Jirka ee Xaglaha ah, 8°) — return loss ≥ 55 dB, MON / FTTH / CATV where high RL is critical

For module ports, LC, SC and MPO / MTP dominate. LC is the default for high-density optical modules; SC is standard for FTTH; MPO handles high-count parallel links.

Jacket Material Selection

Jacket type	ugu wanagsan	Xusuusin
Standard PVC	General indoor use	Lowest cost
Flame-Retardant PVC	Xarumaha xogta, plenums with local fire code	Meets basic flame ratings
LSZH (Qiiq hooseeya eber Halogen)	Xarumaha xogta, telecom rooms, tunnelyada, subways	No halogens, low smoke, no corrosive gas — European & DC standard
LSZH Flame-Retardant	Strict fire-code data centres and public buildings	Combines LSZH with elevated flame retardance
201 Stainless-Steel Armored	Banaanka, la aasay, rodent-prone, harsh environment	140 N xajin; 24 h salt-spray

Nooca Fiber & Standard Selection

• Hal-hab (9 µm core): long-distance, low dispersion — G.652.D backbone; G.657.A1/A2 bend-insensitive for tight cabling
• Qaabab badan: 50 µm (OM3 / OM4 / OM5) for modern data centres; 62.5 µm (OM1) for legacy systems only
• ITU-T single-mode grades supported: G.652.D, G.654.E, G.657.A1, G.657.A2, G.657.B3
• Multimode grades: OM1, OM2, OM3, OM4, OM5 — OM3/OM4/OM5 all support 10G at 550 m

Tirinta Xudunta & Custom Length

Hal-core (fudud), dual-core (laba-laab), and multi-core cables in 4, 6, 8, 12, 24, 48 iyo 72-core habaynta. Custom core counts and lengths supported on request. Standard patch cord lengths run 0.5–30 m; custom lengths up to 300 m for special projects. Standard pigtail length is 1.0 - 1.5 m.

MPO / MTP High-Density Cable — Our Future-Focused Line ⭐

MPO / MTP is the connector platform driving the next decade of data-centre and AI cabling. A single MPO connector carries 8, 12, 16, 24, ilaa 72 fiilooyinka, replacing dozens of individual patch cords with one plug. Our dedicated MPO production runs 150,000 cords per month leh 100% ferrule interferometer inspection and per-core polarity verification.

Xawaare & Link Support

Link Speed	Fiber Count Required	Nooca Fiber	Gaadhi
40G SR4	8 fiilooyinka (4Tx + 4Rx)	OM3 / OM4	Ilaa 550 m (OM4)
100G SR4 / SR10	8 ama 20 fiilooyinka	OM3 / OM4 / OM5	Ilaa 550 m
400G SR8 / DR4	16 fiilooyinka / 8 fiilooyinka	OM4 / OM5 / hal-hab	Ilaa 100 m (SR8) / 500 m (DR4)
800G SR8	16 fiilooyinka	OM4 / OM5	Ilaa 100 m — today’s AI cluster mainstream

MPO Configurations We Manufacture

• Straight MPO–MPO trunk — direct panel-to-panel or module-to-module link
• MPO breakout (MPO to LC/SC/FC) — splits a single high-count MPO into 4, 6, 8, 12, 24 duplex breakouts. Default configurations: 24-core → 12 duplex LC; 12-core → 6 duplex LC. Custom splits welcome.
• MPO–MPO breakout — single-ended maximum 6 Xidhiidhiyayaasha MPO. Both ends must be symmetric (tusaale. 2×12 to 2×12). Common splits for 24-core: 2×12, 3×8, 4×6.
• Hybrid combinations — one end MPO + one end LC / SC / FC

Polarity & Gender

• Nooca A (si toos ah loo maro) — key-up to key-down; standard for parallel optics
• Nooca B (reversed) — key-up to key-up; used with fanout modules
• Nooca c (pairs-crossed) — each fiber pair swapped; legacy duplex applications
• Gender: Male (with alignment pins, fixed / panel side) or Female (no pins, qalabka / patch side)

When you place an order, please confirm polarity type, gender configuration, connector-color scheme, and core-count breakout — our sales team will validate against your target optical modules before production begins.

MPO Quality Control

• 100% 3D interferometer end-face inspection on every ferrule
• Per-core insertion loss, khasaare soo noqda, polarity, fiber sequence, dhererka, and appearance verification
• Batch-to-batch insertion-loss variation controlled within ± 0.08 dB
• Ferrules sourced from qualified suppliers — imported (Japanese) and domestic options; domestic precision now matches import quality at a better cost point

Technical Specifications Across All Series

Halbeegga	Qiimaha
Tijaabi heerka	IEC 61300 (Fasalka U); Telcordia GR-326-CORE (Fasalka R)
Luminta galitaanka (caadiga ah)	Standard ≤ 0.3 dB; low-loss grade ≤ 0.15 dB (MPO single-mode)
Soo celi khasaaraha	UPC ≥ 50 dB; APC ≥ 55 dB
Heerkulka shaqada	-20 ilaa +60 °C (Dhammaan tusmooyinka indhaha iyo farsamada waxay la kulmaan xadhigga balastar); -40 ilaa +85 °C (gaashaaman & branch series)
Heerkulka kaydinta	-40 ilaa +85 °C
Adkeysiga lammaane	SC / LC / FC ≥ 1,000 wareegyada; MPO ≥ 500 wareegyada
Xoog xajin	Heerka 45 N; laan 40 N (muddo dheer); gaashaaman 140 N
Laab laabashada ugu yar	Standard cord 10 mm; MPO branch 15 mm static / 30 mm dynamic; armored 35–40 mm
Dammaanad	1-damaanad warshad sanadeed; design service life 10 sanado

Awoodda Wax-soo-saarka iyo Xakamaynta Tayada

Combined Monthly Output: 13,000,000+ Cords

Taxan	Monthly Output
Simplex patch cord	10,000,000 cords
Duplex patch cord (top-3 producer nationally)	3,000,000 cords
MPO / MTP series	150,000 cords
Breakout patch cord	90,000 cords

Raw Material Sourcing

Optical fiber sourced from China’s four leading brands — YOFC, Ztt, Hengtong iyo Fiberhome — the same feedstock trusted by tier-1 operators worldwide. Ceramic ferrules are Sanhuan series by default, leh Sumitomo ferrules available on request for the tightest concentricity requirements. Jacket compounds come from Shanghai Kaibo, a stable supplier to the same four fiber manufacturers.

100% Inspection Before Shipment

• End-face inspection Xidhiidhiye kasta - interferometer ee MPO, standard microscope for SC/LC/FC
• Luminta galitaanka & khasaare soo noqda test on every core, using dedicated IL/RL test equipment
• Xoog xajin test on every batch
• Electronic test reports (FLUKE / EXFO format) la heli karo dalab kasta
• 3D end-face inspection available on request — standard on all MPO production

Batch Consistency

Insertion-loss variation between production batches is held within ± 0.08 dB. Colour consistency for OEM orders is managed by keeping a first-piece reference sample from every batch for direct comparison on subsequent orders.

Shahaadooyinka iyo U hoggaansanaanta

• IEC 61300 (Fasalka U) — passive fibre optic component test methods
• Telcordia GR-326-CORE (Fasalka R) — single-mode connector reliability
• ISO 9001 Nidaamka Maareynta Tayada
• RoHS raw material compliance reports available
• ah / Itl / TUV testing available on request for North American and European market entry — our products meet the required test standards; third-party certification arranged per project.

Codsiyada shahaadodu waxay ku kala duwan yihiin khadka badeecada iyo suuqa loo socdo. Please confirm target market and required standards when requesting a quotation.

OEM, Baakadaha & Ikhtiyaarada gaarka ah

• Dhererka: fully custom from 0.2 m ku 300 m; standard stock in 1 m, 2 m, 3 m, 5 m, 10 m
• Colour: connector boots and jackets in gray, buluug, cagaar, caddaan, casaan, madow, aqua — used for port identification
• OEM branding: custom logo printing, private-label PE bags, branded colour boxes, calaamada kartoonnada dibadda, spec-sheet inserts — MOQ from 5,000 pieces for printed packaging
• Neutral packaging: available without minimum quantity
• Individual packing: every cord in a single PE bag; carton counts confirmed by cord length and jacket type

Frequently Asked Questions About Patch Cord & Pigtail Sourcing

Q1. What is your minimum order quantity for standard patch cords?

Standard simplex and duplex patch cords have no MOQ — sample and trial orders are welcome. MPO cords typically start at 100 unugyo. Armored cords have a 1,000-piece MOQ due to armor tooling setup; delivery within 10 maalmo. OEM-printed packaging requires 5,000 pieces minimum.

Q2. What is the lead time?

Regular configurations of simplex, duplex and standard MPO ship from stock within days — we keep 2,000–3,000 pieces of common SKUs like SC/UPC duplex 2.0 mm LSZH in-stock. MPO custom orders: 7–12 days for a few thousand pieces; 15–20 days for orders above 20,000 gabal. Branch patch cords: samples ready in 3 maalmo.

Q3. Can you provide test reports and 3D end-face inspection?

Haa. Every cord ships with 100% factory testing (THE, RL, end-face, tensile). Warbixinta imtixaanada elegtarooniga ah FLUKE ama qaabka EXFO are available after order placement. 3D end-face inspection is standard on all MPO production and available on request for other cord types.

Q4. What insertion-loss levels can you achieve on MPO?

Standard-grade MPO: insertion loss ≤ 0.7 dB (multimode 850 / 1310 nm). Low-loss grade: ≤ 0.35 celceliska dB. Single-mode MPO with high-precision imported ferrules can reach IL as low as 0.15 dB for testing and telecom-grade applications. Standard grade covers enterprise networks and office cabling; low-loss grade is designed for high-density cabinet cabling and 100G+ mainstream links.

Q5. Can you customize MPO breakout ratios and lengths?

Haa. Standard MPO breakout defaults: 12-core → 6 duplex LC; 24-core → 12 duplex LC. Custom splits including 2×12, 3×8, 4×6 and other ratios are fully supported. MPO–MPO breakout allows up to 6 MPO connectors on a single end, with both ends symmetric. Trunk length range: 0.2 m ku 300 m; branch length differences within a single cable should stay within 30 cm to avoid fiber-stress attenuation drift.

Q6. What speeds do your MPO cords support?

Our MPO cords stably support 40G, 100G, 400G and 800G parallel optical transmission. This makes them suitable for current AI data-centre cluster fabric, hyperscale MDA cabling, and next-generation coherent transport buildouts. OM4 / OM5 multimode is the current mainstream for 400G / 800G SR8 links; single-mode covers longer reach and DR4 architectures.

Q7. Do you offer UL / Itl / TUV certifications for North American and European markets?

Haa. Our patch cords meet the applicable UL, ETL and TUV test standards. Formal third-party certification can be arranged per project on request — test cost is quoted separately depending on the scope required.

Q8. Which fiber and ferrule brands do you use?

Optical fiber from YOFC, Ztt, Hengtong iyo Fiberhome. Ceramic ferrules are Sanhuan by default; Sumitomo ferrules available on request. Connector grades range from network-level (mainstream cost-performance) to telecom-level (highest concentricity, lowest IL) — specify per project.

Q9. What about armored patch cords — how strong are they and where can I use them?

Our armored patch cords use a 201 stainless-steel spiral armor layer. Xoogga xamaasadda ayaa gaara 140 N (versus 70 N for standard cords) and the armor passes a 24-hour salt-spray test, making them suitable for marine shipping and coastal deployments. Best for static routing with occasional bending — not recommended for high-frequency repeated flexing. For buried installations, an additional protective conduit is recommended to prevent long-term corrosion.

Q10. Do you provide OEM and private-label service?

Haa. Waxaan u soo saareynaa farshaxankaaga - sanduuqyada midabka gaarka ah, calaamada kartoonnada dibadda, private-label PE bags, gelinno xaashi gaar ah iyo buug-gacmeedyo calaamadeysan. Neutral packaging is available with no minimum quantity. Printed packaging with custom logo requires 5,000 pieces minimum to justify plate setup.