FIBCONET manufactures fiber optic پیچ کی ڈوری اور pigtails across five product families — simplex & duplex indoor, waterproof drop, بکتر بند, MPO high-density, and ODF pigtails — with combined output exceeding 13 million cords per month. Every cord is 100% اندراج کے نقصان کے لئے تجربہ کیا, واپسی کا نقصان, tensile strength and end-face quality before packaging.
Our patch cords meet the corresponding test requirements defined in آئی ای سی 61300 (کلاس یو) اور Telcordia GR-326-CORE (کلاس آر). Optical fiber comes from China’s four leading brands — YOFC, زیڈ ٹی ٹی, ہینگٹونگ اور فائبرہوم. Ceramic ferrules use the CCTC series (Sumitomo ferrules available on request), and connector grades run from network-level to telecom-level to match your project’s cost and performance profile.
Beyond standard telecom cords, ہمارا ایم پی او / MTP high-density line supports 40G, 100جی, 400G and 800جی parallel optical transmission — the current mainstream for AI-driven data-centre buildouts and hyperscale MDA cabling. See the MPO section below.
| سیریز | عام استعمال | کلیدی تفصیلات | کنیکٹرز |
|---|---|---|---|
| Indoor Simplex & Duplex Patch Cord | Data-centre patching, telecom room, cross-connect, in-cabinet routing | Insertion loss avg ≤ 0.3 ڈی بی; tensile 45 ن; 2.0 / 3.0 ملی میٹر جیکٹ; LSZH available | ایس سی, ایل سی, ایف سی, ایس ٹی, ایم یو, ایم ٹی آر جے, E2000 — PC / یو پی سی / اے پی سی |
| آؤٹ ڈور & Waterproof Drop Patch Cord | FTTH ڈراپ, outdoor terminal box, CPRI fronthaul, base-station link | IP-rated seal; UV-resistant jacket; pre-connectorized options for 1–4 core drop | منی ایس سی, SC/APC, LC/APC waterproof |
| Armored & Anti-Rat Patch Cord | Data-centre under-floor, in-conduit runs, underground burial, سخت ماحول | 201 stainless-steel spiral armor; tensile 140 ن (2× standard); نمک سپرے 24 h; operating −40 to +85 °C | ایس سی, ایل سی, FC — UPC / اے پی سی |
| ایم پی او / MTP High-Density Cord ⭐ | Data-centre MDA, AI compute cluster fabric, 40G/100G/400G/800G parallel optics, high-density cabinet | تک 72 fibers per MPO; single-mode IL down to 0.15 ڈی بی; multimode low-loss ≤ 0.35 ڈی بی; ≥ 500 ملن سائیکل | ایم پی او / MTP male & female; hybrid MPO–LC / MPO–SC / MPO–FC breakout |
| Indoor Pigtail | ODF splicing, distribution box terminals, fusion-splice on-site | 0.9 mm buffered pigtail; تمام آپٹیکل اور مکینیکل انڈیکس پیچ کی ہڈی سے ملتے ہیں۔ 1.5 m length; custom lengths supported | ایس سی, ایل سی, FC — UPC / اے پی سی |
Every series above is 100% factory-tested (end-face, شامل کرنے کا نقصان, واپسی کا نقصان, tensile). Electronic test reports in FLUKE or EXFO format are available with each order.
| پیچ کی ہڈی | پگٹیل | |
|---|---|---|
| Connectorization | Connectors on both ends | Connector on one end only; other end bare fiber for fusion splicing |
| Primary use | Equipment-to-equipment or equipment-to-panel | او ڈی ایف / distribution-box termination, fusion-spliced to the incoming cable |
| لمبائی | عام طور پر 0.5 - 30 m; تک اپنی مرضی کے مطابق 300 m | عام طور پر 1.0 - 1.5 m; custom on request |
| تنصیب | Plug-and-play | Requires fusion splicer on-site |
| کے لیے بہترین | Data centre patching, MDA, cross-connect, PON drop | Central office, ODF panel splicing, distribution frames |
We manufacture patch cords with all mainstream connectors: ایف سی, ایس ٹی, ایس سی, ایل سی, ایم یو, ایم پی او / ایم ٹی پی, E2000, ایم ٹی آر جے, ایس ایم اے. End-face contact is available in three types:
For module ports, ایل سی, SC and MPO / ایم ٹی پی dominate. LC is the default for high-density optical modules; SC is standard for FTTH; MPO handles high-count parallel links.
| Jacket type | کے لیے بہترین | نوٹس |
|---|---|---|
| Standard PVC | General indoor use | Lowest cost |
| Flame-Retardant PVC | Data centres, plenums with local fire code | Meets basic flame ratings |
| LSZH (کم دھواں زیرو ہالوجن) | Data centres, telecom rooms, سرنگیں, subways | No halogens, low smoke, no corrosive gas — European & DC standard |
| LSZH Flame-Retardant | Strict fire-code data centres and public buildings | Combines LSZH with elevated flame retardance |
| 201 Stainless-Steel Armored | آؤٹ ڈور, دفن, rodent-prone, harsh environment | 140 این ٹینسائل; 24 h salt-spray |
سنگل کور (سادہ), دوہری کور (ڈوپلیکس), and multi-core cables in 4, 6, 8, 12, 24, 48 اور 72 کور کنفیگریشنز. Custom core counts and lengths supported on request. Standard patch cord lengths run 0.5–30 m; custom lengths up to 300 m for special projects. Standard pigtail length is 1.0 - 1.5 m.
ایم پی او / MTP is the connector platform driving the next decade of data-centre and AI cabling. A single MPO connector carries 8, 12, 16, 24, تک 72 ریشے, replacing dozens of individual patch cords with one plug. Our dedicated MPO production runs 150,000 cords per month کے ساتھ 100% ferrule interferometer inspection and per-core polarity verification.
| Link Speed | Fiber Count Required | فائبر کی قسم | پہنچیں |
|---|---|---|---|
| 40G SR4 | 8 ریشے (4Tx + 4Rx) | OM3 / OM4 | تک 550 m (OM4) |
| 100G SR4 / SR10 | 8 یا 20 ریشے | OM3 / OM4 / OM5 | تک 550 m |
| 400G SR8 / DR4 | 16 ریشے / 8 ریشے | OM4 / OM5 / سنگل موڈ | تک 100 m (SR8) / 500 m (DR4) |
| 800G SR8 | 16 ریشے | OM4 / OM5 | تک 100 m — today’s AI cluster mainstream |
When you place an order, please confirm polarity type, gender configuration, connector-color scheme, and core-count breakout — our sales team will validate against your target optical modules before production begins.
| پیرامیٹر | قدر |
|---|---|
| Test standard | آئی ای سی 61300 (کلاس یو); Telcordia GR-326-CORE (کلاس آر) |
| شامل کرنے کا نقصان (عام) | Standard ≤ 0.3 ڈی بی; low-loss grade ≤ 0.15 ڈی بی (MPO single-mode) |
| واپسی کا نقصان | UPC ≥ 50 ڈی بی; اے پی سی ≥ 55 ڈی بی |
| آپریٹنگ درجہ حرارت | −20 to +60 °C (تمام آپٹیکل اور مکینیکل انڈیکس پیچ کی ہڈی سے ملتے ہیں۔); -40 سے +85 °C (بکتر بند & branch series) |
| ذخیرہ اندوزی کا درجہ حرارت | -40 سے +85 °C |
| ملن کی استحکام | ایس سی / ایل سی / FC ≥ 1,000 سائیکل; MPO ≥ 500 سائیکل |
| تناؤ کی طاقت | معیاری 45 ن; شاخ 40 ن (long-term); بکتر بند 140 ن |
| کم سے کم موڑ رداس | Standard cord 10 ملی میٹر; MPO branch 15 mm static / 30 mm dynamic; armored 35–40 mm |
| وارنٹی | 1-year factory warranty; design service life 10 سال |
| سیریز | ماہانہ آؤٹ پٹ |
|---|---|
| Simplex patch cord | 10,000,000 cords |
| Duplex patch cord (top-3 producer nationally) | 3,000,000 cords |
| ایم پی او / MTP series | 150,000 cords |
| Breakout patch cord | 90,000 cords |
Optical fiber sourced from China’s four leading brands — YOFC, زیڈ ٹی ٹی, ہینگٹونگ اور فائبرہوم — the same feedstock trusted by tier-1 operators worldwide. Ceramic ferrules are Sanhuan series by default, کے ساتھ Sumitomo ferrules available on request for the tightest concentricity requirements. Jacket compounds come from Shanghai Kaibo, a stable supplier to the same four fiber manufacturers.
Insertion-loss variation between production batches is held within ±0.08 dB. Colour consistency for OEM orders is managed by keeping a first-piece reference sample from every batch for direct comparison on subsequent orders.
سرٹیفیکیشن کا اطلاق پروڈکٹ لائن اور منزل مارکیٹ کے لحاظ سے مختلف ہوتا ہے۔. Please confirm target market and required standards when requesting a quotation.
Standard simplex and duplex patch cords have no MOQ — sample and trial orders are welcome. MPO cords typically start at 100 اکائیوں. Armored cords have a 1,000-piece MOQ due to armor tooling setup; delivery within 10 دن. OEM-printed packaging requires 5,000 pieces minimum.
Regular configurations of simplex, duplex and standard MPO ship from stock within days — we keep 2,000–3,000 pieces of common SKUs like SC/UPC duplex 2.0 mm LSZH in-stock. MPO custom orders: 7–12 days for a few thousand pieces; 15–20 days for orders above 20,000 ٹکڑے. Branch patch cords: samples ready in 3 دن.
ہاں. Every cord ships with 100% factory testing (The, آر ایل, end-face, tensile). Electronic test reports in FLUKE or EXFO format are available after order placement. 3D end-face inspection is standard on all MPO production and available on request for other cord types.
Standard-grade MPO: insertion loss ≤ 0.7 ڈی بی (ملٹی موڈ 850 / 1310 nm). Low-loss grade: ≤ 0.35 dB average. Single-mode MPO with high-precision imported ferrules can reach IL as low as 0.15 ڈی بی for testing and telecom-grade applications. Standard grade covers enterprise networks and office cabling; low-loss grade is designed for high-density cabinet cabling and 100G+ mainstream links.
ہاں. Standard MPO breakout defaults: 12-core → 6 duplex LC; 24-core → 12 duplex LC. Custom splits including 2×12, 3×8, 4×6 and other ratios are fully supported. MPO–MPO breakout allows up to 6 MPO connectors on a single end, with both ends symmetric. Trunk length range: 0.2 m سے 300 m; branch length differences within a single cable should stay within 30 cm to avoid fiber-stress attenuation drift.
Our MPO cords stably support 40جی, 100جی, 400G and 800G parallel optical transmission. This makes them suitable for current AI data-centre cluster fabric, hyperscale MDA cabling, and next-generation coherent transport buildouts. OM4 / OM5 multimode is the current mainstream for 400G / 800G SR8 links; single-mode covers longer reach and DR4 architectures.
ہاں. Our patch cords meet the applicable UL, ETL and TUV test standards. Formal third-party certification can be arranged per project on request — test cost is quoted separately depending on the scope required.
Optical fiber from YOFC, زیڈ ٹی ٹی, ہینگٹونگ اور فائبرہوم. Ceramic ferrules are Sanhuan by default; Sumitomo ferrules available on request. Connector grades range from network-level (mainstream cost-performance) to telecom-level (highest concentricity, lowest IL) — specify per project.
Our armored patch cords use a 201 stainless-steel spiral armor layer. Tensile strength reaches 140 ن (versus 70 N for standard cords) and the armor passes a 24-hour salt-spray test, making them suitable for marine shipping and coastal deployments. Best for static routing with occasional bending — not recommended for high-frequency repeated flexing. For buried installations, an additional protective conduit is recommended to prevent long-term corrosion.
ہاں. We produce to your artwork — custom colour boxes, outer carton logo, نجی لیبل پیئ بیگ, spec-sheet inserts and branded manuals. Neutral packaging is available with no minimum quantity. Printed packaging with custom logo requires 5,000 pieces minimum to justify plate setup.
ہم اندر ہی اندر جواب دیں گے۔ 12 گھنٹے, براہ کرم لاحقہ کے ساتھ ای میل پر توجہ دیں۔ "@fibconet.com".
بھی, آپ جا سکتے ہیں رابطہ صفحہ, جو مزید تفصیلی شکل فراہم کرتا ہے۔.
