PLC Splitter Workshop
Zonke iinkqubo zokusika zithatha ukusika ngokuzenzekelayo, ngempazamo encinci kunye nokusebenza okuphezulu. Emva kwesinyathelo sokusika, we will strip the fiber and move to next process.
Ukugaya kuthatha malunga 15 imizuzu, emva koko ukupolisha, malunga 12-15 imizuzu. Emva kokupholisha, sebenzisa i-200-fold detector yokwandisa ukujonga ukuba ubuso besiphelo bugudileyo, ukuba akukho njalo, kufuneka ukugaya umva.
Ukudibanisa ngundoqo kunye nenyathelo eliphambili kwimveliso ye-PLC, which needs to be completed in high-level dust-free workshop, kwaye iimfuno zobugcisa kubasebenzisi ziphezulu kakhulu.
During whole production process, kukho amanqanaba amathathu okunyanga kwe-UV. Eyokuqala ithatha 120 imizuzwana yokomisa iglue epoxy ngokukhanya kwe-ultraviolet. Isibini, 30 minutes.Third, 30 minutes.After repeated uv curing, ensure that the glue is completely dry.
During whole production process, there are two stages of high temperature baking. Each high temperature bake at 85°C for 8 ibhokisi yokuhlukanisa intambo yefiber optic. Ensure that the fiber optic array can maintain the normal operation of the product in high temperature environment.
As the high-low temperature cycle, we put the optical fiber into the environment of -40°C~85°C for the experiment, and it takes 4 hours from the lowest temperature to the highest temperature. Our whole test lasts for 12 hours in total. During the production process, we conduct two cycles of high and low temperature test.
Testing Equipment
I-Calibrator engundoqo
3D Uvavanyo
Phelisa ukuJonga ubuso
THE&Uvavanyo lwe-RL
Qhagamshela iisampulu zakho zasimahla kungekudala!